Trewax Paste Wax with Carnauba Wax, Clear, 12.35-Ounce, Ideal on Hardwood Floors, Fine Furniture, Granite, Marble and Bronze

Works well nice shine good protection on floor

Great quality wax. Have an old dresser that was hard to pull the drawers out (wooden slats instead of sliders). After waxing the bottom of the drawers and the wood slides they slide on, it went from pulling teeth to gliding on ice. Works very well, not hard to apply at all as it is soft. Goes on clear and doesn't change the color of the wood, but brings out the vibrancy. Also works great on table saw tops, planer and jointer tops as well giving a better experience with using tools and protecting them from rusting.

Great wax!

This product is really thick and somewhat difficult to apply, it takes some effort, but the results are really great. After a few days the finish is bright and durable. First try was on some cherry boards, used two coats so far, a third will finish up to a glossy deep finish.

I started my new hobby of chalk painting recently. I decided to do some research on the best type of wax to use. Most people recommended Annie Sloan or Minwax but the price made me hesitant. So I found Trewax on Amazon and noted how much cheaper the two pack was compared to anything else for one jar (probably half the price!). So, I figured Amazon has a great return policy and I wasn't risking much. While reading reviews, I noted people saying how this wax was much harder than other waxes--specifically Annie Sloan's soft wax. I was so eager to use it, I started right when it arrived. It was definitely hard and I had to put a lot of elbow grease into waxing my current project. I alternated between using my waxing brush and the yellow pad included with the Trewax. I like the yellow pad a lot for smooth surfaces, easier to get in the grooves. After some time, I realized I should try the wax after it had acclimated to room temperature. This is the key to this wax I've found. I keep my house around 69-70 degrees. Storing the wax inside the house has made a huge difference in it's performance. It is much easier to apply and much much easier to buff. I've included a picture of some frames I've chalk painted and waxed using Trewax. I plan to make an empty frame wall with them. For the frames shown, I used a waxing brush to get in the grooves because of all the details. For something like a side table with a flat surface, the yellow pad that comes with the Trewax would be sufficient. Overall pros and cons: Pros: cost effective, comes with yellow pad that's great for applying to flat surfaces, great application, a little goes a long way Cons: harder wax, needs to acclimate the wax to room temperature to get the best consistency and application

Smooth and easy to apply. Takes a while to dry to a haze so be patient. Nice finish. I use it on my steel products and tools.

Came cracked, crumbled, all bent out of shape, and a strong chemical smell like other reviewers stated, came with the old logo as well. Now that that parts done, I've been using this to coat my woodworking machine surfaces for two reasons: to make the surfaces slick and to keep rust away. It is doing both well, but I will say I feel like I am going through a lot of it compared to what people say (that it should last years) I just don't see that happening. id say it is easy to use, and does take some patience if you want the expected outcome. I apply a thick layer and push it into the surface with a cotton rag, I wipe of the excess leaving a nice film and leave on for 10-15min. I then come back using the same rag and do it over again, eventually you'll have a nice film of wax and things will glide smoothly across it. now typically you want to start with thin applications but that didn't work with this sample of trewax I received- which is why I rated it 3 stars because of the condition and something doesn't feel quite right.

pleasant smelling. hard, durable finish and nice shine and texture. Makes wooden carvings/oblects more attractive and durable, Doesn't yellow like some other paste waxes.