tuf-kote® Black Vinyl Decal Wrap, 3D Carbon Fiber Twill-Weave Matte Design Car Bike Fridge Mobile Self-Adhesive Sticker [2 x 1 Feet]

Good Packaging and Fast Delivery.The Vinyl Film looks awesome Compared to what you Pay for it. Following are Pros and Cons, ------------------------------------------------------------------------- Pros: 1. Easy to Apply. 2. Leaves no Residue ( Atleast while applying I removed it Couple of Times) 3. Adhesive is of Good Quality, as Even after Removing the Film Couple of times, it Stuck quite Well. 4. Overall Fit was Awesome after Using Hair Drier. -------------------------------------------------------------------------- Cons: Only Drawback that I Noticed was BUBBLE FORMATION. There were few Bubbles when I applied Film QUICKLY. -------------------------------------------------------------------------- TIPS: 1. USE HAIR DRIER or HEAT GUN AROUND THE CURVES or at the END of WHOLE PROCESS. This will Give you Perfect Fit and Finish. 2. If any BUBBLE FORMS then GET A NEEDLE ( USE THE SMALLEST ) AND try to make A HOLE RIGHT ABOVE IT and SQUEEZE the AIR out. This might leave MINUTE DOTS , they are almost INVISIBLE and Better than to have BUBBLES. ( CHECK the IMAGES that I have Attached) 3. USE Hobby Knife ONLY. If not Available then USE SWISS ARMY KNIFE, this could also serve the Purpose. --------------------------------------------------------------------------- VERDICT: You get Much More Compared to what you Pay for it. Completely Transforms the Thing its Applied to. A MUST BUY PRODUCT. Thank You.

The product I received is totally awesome. Quality 5/5 Delivery 5/5 Packing 5/5 Looks/Feel 5/5 Price 3/5 It's my first time to order any type of vinyl wrap and still I am more than satisfied with the product. After reading mixed reviews for the product I was having second thoughts but still I patiently ordered the product and gave it a try. Thanks Tufkote for the amazing product. Will recommend the seller for sure. My one star drops for only pricing because I had to pay extra for delivery charges otherwise it's too daam good. Update* 1 . Best thing I noticed about the product I used there is no sticky residue on the back of my iPhone. Love it for the reason.

I received the product in well packaged condition. Its quite a big size to work with. so some things you must know when working with vinyl : You can't get it right first time, vinyl are very tricky to handle and apply ( especially on curved surfaces ). So you will need practice. You can peel it and apply or reuse again. You need to clean surface before application You need Hair Dryer and Lighter and a Hobby Knife. Without them you will create mess and waste a lot. Tools required: Detail Hobby ( Craft Knife ) Knife , Ruler , Cutting Board, Cigarette lighter and Hair dryer. I did wrap different stuff and still have a lot in stock left. There are reviews that say that its less adhesive. I actually think they do not know how to apply vinyl. Pre heating with hair dryer is important, moreover locking edges with cigarette lighter really helps. AVOID USING ELFIE OR ADHESIVES. they may damage your item. I am attaching my wraps for ideas. The product as supportive in every application and i didnt find adhesive to be poor. I got in 199, its a good deal!

I had orderd it, for my laptop. Product quality is not bad, not easy to install air bubbles will be there if you are not professional. But worst part was, it cannot be applied on corner, if you try to apply, it wont get stick properly at corner.

Quality is bad

Just got this and it's good, the adhesive seems sturdy and texture feels good. Packaging was proper and delivery was also good. Wrapped my 2 phones and 1 charger and not even 0.5 ft is used out of given 4 ft. , I think I am going to wrap many thing in this wrap lol. I will wrap my laptop tomorrow! Also, this is a good substitute for skins, you can make around 25-30 mobile skins (or even more) with one 4ft wrap, which is very good but you need to install it properly. First make a cutout then cut it very precisely, then apply it very clearly and carefully! This can look a little different for the skins which are specifically made for the phone, because they are cutted very precisely by machines and there'll always be a difference, we all know that. But come on! one DBrand skin would cost you 600-700 rs, but here you can make 30+ skins! Also, I think this will be a good option to use on car but I don't won't apply it because who knows which RTO law I break and get a challan xD. If you want to buy this, then go for it. It's a good choice I think. This is my day 1 review Will be back here if anything goes against my expectations otherwise just think that skin is good. Adios EDIT: used it to cover my laptop and in the end I ended up with a lot of bubbles, which were difficult to get rid of. So I took an all-pin and punctured all those bubbles and not it looks perfect!. Adhesive is good but not string enough for edges so I prefer to use a hair dryer on the edges for increased longitivity.

Packaging wasn’t good. Neither it came in a box nor in a cardboard roll, hence you end up getting creased paper. Quality isn’t great for pro works. Tears and breaks with little amount of applied pull. Quality is sufficiently good enough for playful wrappings. Things I liked 1. Adhesive is good. 2. Easy to cut with a hobby knife. Good product for hobbyists who want to try wraps on different surfaces.

I feel this is the best alternative to buying expensive skins for specific devices. I've skinned many of my gadgets with this. Some of them include My Power bank, Charger, Charging cable, Hard disk, and even my Laptop. I've provided all the images also. This skin not only adds style to your products but also protects them from scratches. I won't say that it is easy to cut and apply, but even if you take a little time it's really worth while. The product quality is also really good. At this pricing I think it's a must buy for people who want to differentiate themselves from the crowd.