3D Print Tool Kit - 38 Essential 3D Print Accessories for Finishing, Cleaning, & Printing - Removal Tool Included - 3D Print Tool Set

This 3D print tool kit contains almost everything you need to start 3d printing or even if you have been printing for a while. The Items themselves feel very good quality. The wire cutters and needle nose pliers can be very useful for removing supports from prints or even printer maintenance. Other things included such as the file, deburring tool, tweezers, and the knife kit are very useful for cleaning up your prints. The kit also contains other printer maintenance tools, such as metal brushes and needles for cleaning your nozzle. The digital calipers, while not the most accurate, only going to the tenths place in mm (.0) and the hundredths place in inches (.00), work reasonably well for the price and until you can get an upgrade. I find that the print removal spatula is very flimsy, and I don't use it very often. Besides that, the rest of the kit for me has been a great addition to my 3d printing experience, and it even comes with a zipper pouch to keep all the tools in, which is a nice touch. Would Recommend.

This is a great kit to make your 3D printing life much easier. All the tools are decent quality, so much better than anything that might come with your 3D printer. Buying this tool kit is a great way to get all the handy stuff you need or didn't know you needed without having to try to source everything yourself. The only thing that could improve is the calipers. They are plastic and like to turn on by them selves. If they were just a bit tighter, they would be perfectly use able for roughing in your 3D printing design. At this price, I am surprised they could afford to put a set in there at all. For the money, the kit is completely worth it, buy one, buy one for a friend, buy one for your local maker space, buy one for a Christmas present.

Third Update: Customer service contacted me and was able to send me a new a kit free of charge. If anything I can easily say they stand by there product and are willing to listen, make improvements and make things right . This time the box contained all the items listed on amazon and now that I was able to test everything I can easily say that the kit is worth the cost. Second Update: Customer service finally contacted me see how it goes will update soon. I thought I would try this kit since I needed a deburing tool and a nice set of exacto knife blades but I am regretting my purchase. Let me list the cons first. Cons: 1. Missing items I did not receive any pliers or wire cutters. 2. slight lack of quality control. My deburring tool does not clip in right its possible I am using it wrong but it moves so freely that I have to I have to create good bit of pressure by placing my thumb on it so it doesn't move while I am trying to use it. The calipers are very cheaply made I mean very cheap I would not buy this kit for the calipers mine are super loose and slide on its own (which auto turns them on which in turn drains the battery). From what I can tell its impossible to tighten. They are made of plastic and not well molded at all. The inside of the head was not flat and I had to clean some of the plastic off on my own. It honestly it look like a bad 3d print which is kind of funny when you think about it. 3. You can probably spend a little more and pick out your own items that are better quality. Pros: 1. Price assuming you get everything its a cheap kit respectively. 2. The exacto knife is not bad from a few uses its decent quality. 3. Wire brushes are good quality too but they are not super expensive on there own you can get 8 for 6 bucks if all you need is the wire brushes. 4. Cutting mat is nice. Its nice to have seems like a decent quality pad. 5. scraper/removal tool seems like its a nice quality product. I reached out to there support hopefully I can get the other items and update my review.

Not sure why Amazon is recommending I rate how warm, sheer, and thick this kit is, but it’s great. The calipers are actually decent, but they’re the same ones you can buy for like a few dollars on eBay. You can’t expect that much out of your cheap calipers from a kit that costs less than 50% of a single set of Mitutoyo calipers, but all in all they’re more than adequate for most tasks you’d use them for. This scraper/spatula is the best one I’ve used, it has a very this edge which is perfect for getting under your prints and peeling them off. Needless to say, CHEP knows what he’s doing and I’d definitely recommend this a great all in one 3D printer beginner kit. Go check out his YouTube channel as well if you haven’t already.

I got my Filament Friday 3D Printer Toolkit yesterday and couldn't wait to open it up. Its is sturdily packaged in a nice cardboard box and the tools were easily accessed when opened. The Zippered tool bag was very nice and will hold all the tools except maybe the Digital Calipers due to their length. All the tools look to be good quality but the only one I used so far is the spatula for removing a print from my printer. There is a card that has descriptions and illustrations of the tools. Unfortunately the illustration for the wire cutters doesn't match well with the cutters in the kit (The cutter in the kit is a nicer version of the one that came with my Ender 3) and the illustration for the Cleanup Knife doesn't show it as a blade set. Those complaints are minor because as a whole, the assortment is a good buy. I'm actually going to use the cutting board that comes in the kit as a pad to rest my glass print surface when removing parts. I recommend this setup for those just getting started.

Cumple

All the toold you need to start 3d printing in 1kit. As you get most used to it you will probably want to upgrade a couple of these items but its still worth it.

Un morceau n’est pas fonctionnel

Good price if you don’t have the set but most of the contents in box I already have with my machine