VEVOR 2000W Electric Brushless DC Motor Kit - 48V 4300rpm Motor with Upgraded Speed Controller and Throttle Grip Kit for Go Karts E-Bike Motorcycle Scooter DIY

Shipped very good. Great kit for beginners. Very fast and functional, and great value for you money

I had a battle with myself on the review. And wish I could give it 5 stars. OK. The motor is absolutely wonderful! 1800 watts Powered by any 48 volt lithium battery, The motor over achieves! Top speed on speed 3 Is 33 miles an hour carrying 130lbs. Connections were well put together and easy enough To attach To make motor run. I installed this on a razor MX500 Where a bunch of modifications had to be made. I had to recess 2 bolts On the motor to make it fit. And I had to take the old sprocket off of the old 500 watt motor and fit it on to the 1800 watt motor To fit the chain. Which was easy enough. The cons: The switches! 3 speed switch Is cheaply built. I suggest buying an aftermarket 3 speed switch to fit as this 1 only 2 settings work Consistently But can be finagled to make all 3 work. 3 speed switch is also too small! It was terrifying trying to mount it Without the wires coming off of the switch. Throttle that came with the kit is cheap! Very hesitant When turned Takes forever to engage the motor. This is why I rated it 4 stars instead of 5 And I hope nobody takes offense. Just an honest review from a guy who never did anything like this before when it comes to electric Kits. And for a cheap MX500 build this is definitely the way to go! Just get a new hand throttle And a new 3 speed switch.

Its Great! Super powerful and lots of fun on my little go cart. great for the kids to ride, defiantly recommend the speed control switch. Great value for the cost. The welds look a little weak, but we'll see how long it holds on.

Comes with t8F sprockets, 2 of them for the drive shaft on the motor. I am using this to power my mobility scooter. It has great control, doesn't get hot, and works great. BUT...It is a slow start. Top speed with the 11 tooth drive, and a 28 tooth driven sprockets driving 10 in wheels is still 28mph. But, no torque. I'm gonna have to gear it way down , so it will have more power for hills. All in all, a good value. I don't see this powering a bicycle. A go cart, for sure. And going almost 30mph on a mobility scooter is kinda nuts, too. My old motor only got me 15 mph, but It would do wheelies for a block. No way this is 2000 watts, but the price reflects that. My old motor was 800 dollars, but it lasted 10 years. UPDATE: I got a 54 tooth sprocket for the drive wheels. Still does 25 mph on speed three, 7mph, on speed one, and 15mph on speed two. I can now go right across grass, and do wheelies!

Frankly, I am having one very big problem, already, and I have not even been able to install this thing, yet: The sprocket is too small for what I am doing, and I cannot even get the nut/washer/sprocket off to add a more appropriate size already on-hand. I have tried time and again to do this, and instead, it seems that it was put together so tightly (via a machine) that, instead of being able to do what I need for the sprocket, the nut & bolt are suddenly completely stripped (the nut will turn constantly, but it WILL NOT come off. which means that THIS thing is NOT built to be repaired or altered. And this is just for a basic and necessary modification. Overall, from what I am noting, right now, This was a complete waste of money.

Amazing I had put this motor on my mx350 with some modifications and I had went between 30-40mph the controller is light weight and compact to put in. Small spaces and thus is probably the best kit I've bought for my bike it came with all the bolts I needed and the wench was VERY USEFUL for the bolts the throttle had a very nice soft feeling the only thing that I would recommend getting is a better throttle because the one that's included has a slow response rate so I had got a different throttle made me go 0-30 in 8secs Amazing product for the price and great for starters

It’s a good motor but don’t get it for a razor mx350 unless you have a way to raise the motor because it hits a part of the frame.

I recently purchased the VEVOR 1800W kit for an electric vehicle project, and overall, it’s a solid starter kit with a few caveats. Right out of the box, the motor arrived banged up with noticeable scratches and a slightly bent output shaft. While the damage didn’t affect drivability, it was disappointing to see for a brand-new product. That said, the kit’s performance was impressive. The controller, equipped with a SMOOTH START feature, delivered a very slow but responsive ride, which exceeded my expectations for a stock setup. I was planning to upgrade to a VESC-based controller anyway, so the controller having smooth start didn’t deter me. The kit’s wiring was a highlight—super straightforward and clearly labeled, making installation a breeze even for a beginner. Despite the motor’s rough condition, the kit’s affordability and solid performance make it a great entry-level option. I’d still buy it again for a budget-friendly starting point, especially if you’re planning to upgrade components later. It’s not perfect, but it gets the job done well. 4 stars for the banged up motor

Si estás buscando un motor con fuerza y velocidad y bajo de precio, esto es lo que buscas, lo tengo montado en una bicicleta en la velocidad 1 35kmh velocidad 2 50kmh velocidad 3 72kmh y muchísima fuerza, y eso que lo llevo con una batería de 48v 20ah que da 960watts hora, no quiero ni saberlo con una batería más potente

Muito bom produto tal como tudo da vevor. Motor escovado. Chegou rápido e agora é ir montar. Muito silencioso e equilibrado

Motor has no torque what’s so ever the controller has a built in slow speed feature, when you hit the throttle it gradually picks up speed. NOT FUN!

I couldn't get this item replaced. The backplate, where the wires come through, was buckled outwards and cracked in a few places, rendering this motor useless. This obviously was a factory inspection issue. More than likely caused during the production assembly process. Trying to contact this vendor has been a lost cause and frustrating. I have been trying for months now. I see some people from the US who have a large audience on social media seem to get free products and are able to get replacements overnight, but no luck here in Canada. Amazon was absolutely useless because of their 3rd world support. All I need now is a new backplate.

Wurde als ersatz für ein nitro motors quad verbaut... passt ohne anpassungen perfekt... über die haltbarkeit kann ich noch nichts sagen...