EUREKA ERGONOMIC Computer Tower Stand, Height Adjustable PC Stand for Under Desk, Mobile Rolling CPU Holer with 360° Locking Caster Wheels, Desktop Tower Cart on Floor, Desk Accessories, Steel, Black

This unit is worth the price. Sturdy, simple and smooth rolling. Be sure to check your measurements before purchasing is the only caveat. My PC used to be on my desk but teetering near the edge and I really never liked that setup, for safety of the Pc of course. Also, was never a fan of floor placement for a PC. This unit is a happy medium. The Pc sits on this stand right in the back under my desk sideways. I have the side of the case with the rear of the ssds in the case facing me because i frequently fiddle with adding and removing drives. If you find the pc is too snug, like I did, I simply and gently bent the platform near the screw holes outward some, this made sliding the pc onto the stand easier and removing the sliding case door easier too. I checked my pc once every two weeks for the first month to verify no dust is accumulating too quickly. I’m happy to report, with a dog and cat running around, the dust situation in the PC does not seem to have changed much from being on my desk. Verdict, if you’d like some more desktop space or just want your PC to be easily moveable and less chance of filling with dust, than this is your answer!

Got this last week. Reasonable quality. The powder coating is even. The u-shaped frame-pipes seem to have nuts welded inside the holes, as opposed to just punching the metal and Trying to thread whatever gets pushed in. (Been there before, dislike that.) Assembles with 8 screws. Plus 4 casters. Seems solid, with the screws tightened. (Philips #2 not included.) I did not need the directions, except to see which of the two choices of holes the longer bolts went in. (Which becomes obvious, anyway...) Third hole from the top - was there 5 or 6? I forget...) brings it to just under my desk (Standard 30" tall?), with 2-3 inches left above, just enough to reach the USB ports up there. It leaves a little space below. I plan to put a board across the bottom bars to hold up a BG500 (my small no-longer-manufactured UPS from APC) under the computer. Did not measure the height below, as I did not buy the board yet. It's 3-4 inches or so? The BG500 will definitely fit laying down, and will then roll in/out with the 'puter. (A BACK-UPS 300 may not, as it's taller and the inserted plugs would then also point upward. Put this one on the floor below it, if you have one, no shelf.) Seems sturdy enough. Gets it above the floor dust. Fits my 'Game' tower. (I bought "Power".) Rolls easy enough to get access. (Wiring tip: Leave 'service loops' - aka enough extra slack - in your cables, so there is enough wire to pull the 'puter out for access , if you often need to, without needing to unplug things.) If I was going to nit-pick, I might say the shelf could be an inch or two longer, but the feet of my machine ~are~ firmly on the deck. It's $40 for 2 sets of 2 powder-coated tubes, 4 wheels and a powder-coated shelf - but worth it comparatively, I feel. I would buy it again. As a note, I also have a $20+ plastic 'X'-stand that I bought for work, was $20. It works, but no height, no way to add a small shelf. I like this much more than that one, in the end. Three months later, still holding the computer sturdy under my desk surface, well above the carpet and cat-hair. Moves in and out easily enough. Solidly satisfied.

I needed to make room on my desk for studio lighting and a microphone arm, but I didn't want to put my expensive PC on the floor because it's carpeted, so I decided to get a cart for it. There's a similar metal cart on this site for $54, but I couldn't justify that kind of money for what it is. However, I still wanted something sturdy and mobile, so I took my chances with this cart. It's perfect! Easy to put together and incredibly sturdy. I'm not worried about my PC crashing to the floor, and the fact that I can elevate it means not only is it well away from the carpet, I also don't have to invest in a bunch of longer cables for everything. The guard rails on either side make sure that your PC isn't gonna tip over should you or a pet accidentally bump into it, and you can move the whole thing around for easy vacuuming. Also, the shelf is long enough that if your PC already fits on this cart, you shouldn't have to worry about the tower tipping forward or backward, which is a problem I've seen mentioned in the reviews for cheaper carts and stands. If you're between the other metal cart and this one and don't need the second shelf, go with this one and save yourself the $18. Also wanted to mention that the logo is only on one side, and this cart is otherwise symmetrical, so it's easy enough to have it face away from you if that's something you're worried about.

The four feet on the PC case are all touching the shelf, but hanging off the ends slightly. Just an inch or 2 more and it would be a perfect fit. It would be nice if the company made a larger option since it barely works with a mid tower footed gaming case and I don't see this working for a full tower. It seems to be well-made and sturdy. Rolls easily across carpet. The extra height and ability to roll it around makes accessing the back of the PC so much easier.

Dieser Rollwagen wurde schnell verschickt und kam in gutem Zustand an. Er ließ sich schnell und problemlos zusammenbauen, man benötigte keine Werkzeuge. Seitdem steht er unter meinem Schreibtisch, beherbergt meinen Stand-PC und verschafft mir Fußfreiheit. Er altert mit Anstand. Ein guter Kauf!

自分は一応デスクトップPCのサイズも計ったつもりでしたが、少々奥行きが足りませんでした。 耐久性は良いと思います。 使い始めて日は浅いので、評価を満点とは言い切れませんので☆４としました。

Montage facile. Produit de qualité. Fait très bien le job.

Nicely made. Went together effortlessly in five minutes. Does exactly what I wanted it to. I would buy a second shelf for it if one were sold. Recommended.

Resistente, buenso acabados y sobre todo perfecta la opción de poder regular la altura de la base.