Bike Fork Mount Block for Car Rack Cross Bar Truck Bed Storage 9x100mm 15x110mm 15x100mm 12x100mm 15x150mm

I mounted these on separate 18 inch 1x4s and it is working really well for storing in a bike tent and garage.

Great fork mount. I screwed them into a dinette in my RV to transport my bikes on trips inside the trailer. They work great and price was competitive especially versus famous brand names that cost 5 times these.

My new bike has a 110mm x 15mm (Boost) thru axle. Before bolting this down to the bike mount in my van I tested this just to be sure it fit both the axle (fork mount inside length and diameter does fit my axle well) and that the outside fork mount length correctly fit the fork width, and that the outside diameter of the round part of the fork mount fit into the recesses at the bottom of my fork legs properly so that I could easily set my fork down onto this fork mount and then re-install the axle. Everything fit perfectly. It is very easy to use. I have no opinion on the supplied mounting hardware because I was installing this in place of an existing 9mm quick release type fork mount and I reused the old machine bolts and nuts that were exactly sized to work with my situation. The mounting holes were exactly the same size as those on my old QR fork mounts. The package did come with a selection of both screws and nuts and bolts. I have other fork mounts for my bikes that use 9mm quick releases, and this one is just very slightly taller. I consider that a plus because I have mounted bikes on my other fork mounts that the disk brakes just barely cleared the mounting surface under the fork mount. This one has slightly more vertical clearance from the bottom of the mount to the axle centerline.

The part is well built, but it is a little short for one of my Fox forks. I had to shim up 1/2" to avoid scraping the rebound cap.

This is an aluminum front axle fork mount for bikes. There are three holes on one side of the base, and two additional holes on the other side of the base that are threaded for metric screws. I'm going to use this as a fork mount when transporting my bike inside my truck. I will also use straps for extra security.