HVACSTAR Fuel Pump for Kubota BX2360 BX23 BX23D BX24 BX24D BX22 BX25 BX2660 BX2660D

This pump is great! No replacing connection ends as mentioned in other reviews of other units. Only thing is one hole has to be made just a tad bigger to use the larger bolt that kubota applied to mount pump. No big deal. My tractor is a 2012 BX25. My OEM pump failed after 473 hours of home use. Cost at dealer is $120.00 out the door. Tractor is running strong again. If you replace the two filters and you have no pressure at the injector pump bleed off screw your problem is the fuel pump. Get this pump and save yourself about $100.00.

Installed several months ago and is working fine. I think I had to replace the connector and use but connectors for my particular install, but that's not a problem for my application. Was easy for me to complete given task due to mounting location. This cost much less than the factory replacement was going to cost. I would buy again without hesitation.

Product is a very nice alternative to an OEM diesel fuel pump from Kubota. The electrical connector fit perfectly but you will have to widen one of the thru holes on the attached bracket. The BX tractor OEM fuel pump is held in with a 10mm and a 13mm bolt. The 13mm side will have to be slightly opened up on this pump to allow clearance for the bolt. Other than that, it works great so far.

I loved how easy it was to install for a kubota bx2660. The connector was designed to match. The right side of tractor on fuel pump you will have to enlarge hole to accept a 10mm bolt. I drilled both in seconds with a step down bit. I installed in less than five minutes and cycle the pump 3 times about 30 seconds instead of priming purge bolt. Tractor runs like it was designed so very happy. Plus very easy to read in and out sides.

Part looks and works like OEM little louder but definitely works arrived ahead of schedule delivery time packaged well price better than OEM Only draw back trying to replace in same spot as old one is a bit of challenge they NEED to mark the flow direction clearly put in backwards first time and had to oversize one hole to put bolt through thats Kubota fault not suppliers fault would recommend and probably buy from seller again only reason four only stars is the flow direction NEEDS to be marked

Installed this on my Kubota BX2660 compact tractor. Delivery was quick and it was exactly what was needed. Works as it should! I took the advice of a previous reviewer and pre-drilled the inside hole to accept the 10mm bolt the OEM pump uses. Also, using the R-2 position on your hydraulic bucket lifts the tractor up enough to provide oodles of space to get underneath to the pump and the bottom fuel filter with being a contortionist.

This pump is crap. It died after 8 months due to condensation getting in around the wires. It had been giving me fits for months before with intermittent issues which were only resolved after replacing it. I decided to do an autopsy on it and you can see proof of the results in the pics. This was on a tractor that was kept indoors and never really used in the rain.

This pump is hit or miss on quality. The first one I purchased lasted over 100 hours before failing but the second one only lasted around five hours. I’ll buy two at a time moving forward as all the others I’ve purchased (I’m on my fourth pump) seem to be about the same quality but cost more. If I end up with consistently failing pumps I’ll update my review.

Used on bx23 kubota tractor. Works great

Parfait.