Thin Fit MagFit Designed for iPhone 16 Pro Case [Hard Shell] [Military-Grade Protection] Compatible with MagSafe - Black

Spigen thank you for this case. My iPhone is well protected in this thin designed case. Slaps right on easily and off for cleaning. Nicely made and soft. MagSafe works as expected. Simple looking and durable. I recommend it. Worth the money.

I picked up an IPhone Air and was immediately on the hunt for a case. I debated going “naked” but the IPhone Air is a little slippery and I didn’t want to chance it. My prerequisites were: 1. Slim fit 2. Decent protection but didn’t need protection from falling from a 2 story building. 3. Good grip 4. Somewhat resistant to fingerprints and easy to clean. I first ordered a Jetech case and it was a good case. Thin like I was looking for, with decent protection, but, a fingerprint magnet and hard to clean easily. The “plateau” protector for the back was also not uniform across the back so the phone would rock when using it on a flat surface. MagSafe was excellent. Next I ordered a Reborn Device case from TikTok. This case was more expensive and had the look of aramid fiber. It wasn’t actual aramid fiber but has a covering that resembles it. Nice thin case and if you’re not using a screen protector, it will protect your screen when put face down on a table. Case also has a nice feel to it. Drop protection probably isn’t that great as it’s very thin but will protect against scratches. Also this one is a fingerprint magnet and very hard to get fingerprints clean. MagSafe was excellent on this one also. I then got on Amazon and started looking for another case. I’m one of those people that will spend $100+ on cases until I find the right one for me. That search led me to this one. It seemed to have everything I was looking for. It was thin, doesn’t attract fingerprints easily (easier to clean when it does), good grip on the sides and back, uniform camera plateau so it sits flat on a table when you’re using it and doesn’t rock and if you’re using a screen protector, the lip that protects the screen is big enough to do the job but not so big that it gets in the way. All the buttons are tactile and easy to push. The camera button may be a little too easy to access but I just set the button to double click to activate and haven’t had any problems with it turning on accidentally since. the MagSafe feature is great on this phone also. If you need a good, thin, inexpensive case, this is it. There may be others that are better but they’re most likely more expensive. This is a simple, basic, inexpensive case that just gets it done!

I originally purchased an official Apple case for my iPhone 17 Pro Max, but I ended up returning it after trying the Spigen Thin Fit MagFit — and I’m so glad I did. This case costs nearly half the price and is far superior in quality. The slim, lightweight design fits the phone perfectly without adding bulk, and the MagSafe connection is strong and reliable. It also feels more durable and grippy in hand compared to Apple’s version, giving me extra peace of mind that my phone is protected. Overall, this is an excellent case that delivers premium quality and functionality at a much better value. Highly recommend it over the overpriced Apple options!

Excellent case, fit well! Black is black, the grip is superb, full protection, not expensive, and texture is something) Well done Spigen!

First Spigen for me, though my wife has been fond of them. I've had Otterbox Symmetrys on my last 13 pro and 15 pro. This feels about as protective as my 15 pro symmetry. Surprisingly, while it seems thinner, it weighed the same as the 15 pro symmetry. I like the texture as it's very smooth in pockets, especially, but I don't find it slippery in my hand or on countertop. I can easily hold it near vertical with 4 fingertips on the back (not touching the camera ring), which is a good gauge of grip. I've dropped it 2x outside now and the case does show some dings on the camera ring, that are a bit rough, but the soft-ish material smooths out with use quickly. That also applies to some of those seams around the back panel that, as others have pointed out, can be misaligned and leave a ridge; they will soften with use, though I'm sure sandpaper may work, too. As for the sensitivity of the camera button that others have taken issue with (mostly airs, though), that's really an Apple problem. Nevertheless, the best solution I've found is to make it a double-click to launch. Haven't had any issues in a month. Only a few real drawbacks. It's only slightly loose in the middle of the front sides, which is more about longer term durability. The soft material around the front and camera bump are soft, which feels good and absorbs shock, and get dinged pretty easily. Lastly, I wish the camera ring was open to the bump out, but it could be necessary for stiffness of the back, thus protection. At less than half the price of a symmetry, it's great deal and super similar. I did try one other from smartish that mostly liked, but it had much smaller radius on the edges, making it all seem bigger and harder to pick up off of flat.

All around excellent! Sometimes cases can be too rubbery and slip getting out of your pocket, sometimes too slippery. Spigen did it right with this case. It is thin and minimalist like I want, but has enough of a lip to protect the screen. Absolutely great job, Spigen!

I'm just not sure about this one - probably returning it. Had the Spigen slim fit case on my iPhone 12 and it was a phenomenal case. Slim, light, easy to hold, and showed virtually no wear the entire time I had it. (Got one for my mom too - that shows how much I liked it!). So, didn't think twice about getting another one for my new 16e. The new one is the same high quality and looks great - buttons covers are crisp, but the lip over the screen is about 50% lower than my old case - it is only barely raised above the screen. I know this is meant to be a minimal case, as my older one was - but I don't feel this offers the basic protection I need.

I'm yet to actually put to the phone as I 'm waiting to order the phone A well made, stylish and sturdy case Looks like it will provide good protection on all corners The case is nice and clean looking, pretty slim overall.

Perfect fit and finish Great quality

Absolutely loved this case! The fit is perfect and it looks great on my phone. Black on black looks great!

Permanent wear/damage is visible on the case after only 2 weeks of lightly using it. Disappointed.

Having used various screen protectors over the years, the Spigen Glas.tR EZ Fit for iPhone 16 Pro Max stands out for its ease of installation and durability. Spigen’s EZ Fit tray takes the guesswork out of alignment, making application quick and foolproof. Even with no prior experience, it’s almost impossible to mess up, and there were no annoying bubbles or misalignment issues. The tempered glass itself is crystal clear, maintaining the original screen quality without affecting touch sensitivity. It feels smooth under the fingers, just like the bare screen, and works perfectly with Face ID and gestures. The oleophobic coating does a great job of repelling fingerprints, reducing smudges and keeping the screen looking clean throughout the day. In terms of protection, the glass feels sturdy and well-made, offering solid impact resistance against minor drops and everyday wear. It gives that extra peace of mind, especially on a premium device like the iPhone 16 Pro Max. After a few weeks of use, it’s holding up well with no scratches or cracks. The two-pack option is great value, providing a spare in case of accidental damage or for future use. While there are cheaper alternatives available, the quality, ease of application, and clarity make this a worthwhile investment for anyone looking to keep their iPhone screen in top condition. Overall, Spigen Glas.tR EZ Fit is a fantastic choice for hassle-free installation and dependable protection. It offers a premium feel without compromising screen clarity or responsiveness, making it one of the best screen protectors I’ve used.