ebpsneer Real Red Oak 1-1/2 inch ×26ft Wood Veneer Edge Banding Roll,Pre-glued Iron On Wood Veneer Edging-Backed with Hot Melt Adhesive-Flexible Wood Veneer Edgebanding for Furniture Restoration

Spliced a short intervals. Worked for my project as I was doing short shelves and could work around the splices. Splice is about every three feet. Plenty of glue and stuck quickly. did sand, stain and polyurethane one splice to see how visible it would be after finishing. The splice was noticeable, but if you are using it in a spot that won't be seen much, the banding was usable.

The banding came neatly rolled and applied perfectly. It was my first time doing edge banding and it went flawlessly. I used a heat iron set to 250 degrees and the hot glue on the banding applied quickly and stayed in place. Very nice product. Will buy again.

This is not high quality edge banding. About 1/4 of each seams was not stitch together well. There were noticeable gaps where there was a stitch. With my project, that was not as big of an issue, but for some of you it would be! Some of the stitches was quite a different type of grain. That too was annoying. I would say that was about 1/8 of the time. The adhesive is quite good though. I would probably buy it again if I was doing the same project, but if it was in a very exposed area, I would find another brand.

Why did you pick this product vs others?: No reason for choice but it works very well.

Easy to install and looks great. It matches the red oak I used almost perfectly and the quality of the glue gives me confidence that it won’t peel off.

Had to replace damaged trim on oak desk. Fit perfectly. Had to stain darker to match existing oak color. Good price and quality. Only bad thing is that I only needed 24 inches of trim. The roll has several feet of material.

Very fast shipping! Great edge banding and good stain absorption. Perfect for my project!

Worked great