8K HDMI 2.1 Certified Fibre Optic Cable CL2 Rated 15M, Ultra High Speed HDMI Support 8K@60Hz 4K@120Hz 48Gbps eARC HDR HDCP2.3 Compatible with TV, Laptop, Projector, PS5, Xbox Series X, AVR

Fantastic value for money and works well. Passes the signal fine, bear in mind these are directional so likely will not work for HDMI ARC applications. Used to connect my AVR to my TV which is in another room. Fibre cables are delicate so treat with care, they're thin cables so easy to run. Good quality feel to the ends too. I ran two for redundancy purely due to the fact it would be hard to run any more dif I had an issue down the line.

Great lead… (RUIPRO - 8K Certified HDMI 2.1 Cable 6.6ft/2m Ultra HD High Speed 48Gbps 8K@60Hz 4K@120Hz Dynamic HDR eARC HDCP 2.2/2.) I left this review mainly for anyone in the same situation I was. I was trying to hook up a NVidia 5080 to a 2022 Samsung tv (and get 4k at 120htz). After buying the following two leads… £6 (10K 8K HDMI Cable 2M Certified, Snowkids HDMI 2.1 Cable Ultra HD High Speed 48Gbps, 8K@60Hz 4K@120Hz HDMI Lead eARC HDR10 HDCP 2.2/2.3) And then… £14 (Anker 8K@60Hz HDMI Cable, Ultra High Speed 4K@120Hz 48Gbps 6.6 ft Ultra HD HDMI to HDMI Cord, Support Dynamic HDR, eARC, Dolby Atmos) I could not get either one of the leads to work without constant signal dropouts. Both leads worked fine at 4k 60 htz but would not work above 60 htz at 4k. There were plenty of reviews saying the leads are great and work fine at 4k 120htz, but I can only now assume they work for consoles and other equipment, but not my situation / TV. I spent days scouring the internet and forums for solutions and attempting all sorts of stuff. Eg… reinstalling drivers, moving leads away from Wi-Fi interference, reseating graphics card, different hdmi ports, trying every different pc and tv setting available. Even reinstalled windows and resting the TV to factory settings. I was completely out of options and even started to think the graphics card was faulty or my Tv didn’t actually support what it was supposed to support. I was discounting the quite common “try a better cable advice”, as I had already purchased 2 different cables that seemed to have good enough reviews. I was also thinking how can two different certified cables be the problem. I was almost ready to buy a fibre optic cable at around £80, but though I would give this a try first. As soon as I plugged the cable in, there seemed to be a noticeable difference. Compared to the other cables, this cable seemed to be a tighter fit which was encouraging. Still, I was pessimistic after the issues I had with the other cables. However, this cable completely works for me. I haven’t had a single signal loss since using it for a whole day on 4k 120 htz. So glad I tried RUIPRO. It maybe my particular set up but I’m definitely sticking with going forward.

Brilliant, so good I ordered another for upstairs

This is the 4th 10m active optical HDMI cable I've been through trying to get my RTX 4000 series GPU to play ball with my LG C9. The other 3 cables I've tried included top brands such as Cable Matters and Blustream but they all suffered from what I assume are signal drops or handshake issues when using 4K 120Hz HDR and G-SYNC (the C9 is G-SYNC compatible). The TV frequently would go black for several seconds (regardless of using desktop, in-game or when streaming video), repeatedly triggering the 'instant game response' message. Frustrating to say the least! I was beginning to lose hope as I wasn't 100% sure if it was the TV, HDMI cable or GPU causing the issue, but I was fairly confident it was the cable given that moving the PC closer to the TV and using a shorter cable worked just fine. I know 10m is a lot, but active/optical cables are designed specifically for transmitting up to 48 Gbps over longer distances, and running 4k 120Hz 10 bit colour depth (the C9 panel doesn't support 12 bit) uses bandwidth of around 40 Gbps...well below the 'certified' 48Gbps these cables can supposedly handle. This cable from RUIPRO actually works! After 3 days of use it's not dropped once and is rock solid at 4K 120Hz G-SYNC HDR 4:4:4 10 bit depth. It's also very well constructed...thick enough to provide good protection and very flexible making routing the cable through trunking a breeze. I can see why this cable gets a lot of mentions on AV enthusiast forums. It's expensive...but it's the only cable I've tried that actually does what I need, so great job RUIPRO! If this cable goes the way of the others I've tried after a while, I'll come back and update this review.

プロジェクターを天吊り設置するにあたり、これまで使っていたHORIC HDMI 10mケーブルから こちらに乗り換えました。 最初、動作テストと言うことで、 何気なくコネクタを挿してTVで映像を確認しました。 無事映像出ますので、それではと！本格設置、がっ しかし！ ケーブル敷設後、映像出ずにがっかり まいったなと？？？となりました。 調べてみるとこちらのレビュにー コネクタには入力側用、出力側用が有るとの事、 実機もコネクタ部に記載が有りました。 気を取り直してケーブル引き換え、 再度Power オンすると映ってます。 綺麗にスクリーンに映ってます。 別電源も不要で12m 値段も5000円以下で購入、良い買い物が出来たと感じました。 それから使用する事数日、いつものようにアマゾンプライムで洋画を見ようと、 システムオンするも、映像が映りません。 当方使用システムは気持ち古く、 アンプはYAMAHA RX-V777 HDMI入力6 出力2、 プロジェクターはエプソン EH-TW410で構成、 数日は普通に映っていたのに、 またまた？？状態 出力ポート逝ったか？と思いつつもまずはFire TVからのHDMIケーブルを (こちらはHORIC 1m 今までノートラブル) ヤマハさんの入力ポートHDMI1からHDMI2に変更、ありゃ〜 映るではないですか！ 入力HDMI1はお亡くなり？ まぁいいかぁ〜 ナンクルナイサと 気にせず使用していました。 ところがどっこい 1週間以上経ったある日、どれどれ今夜は久々映画でもと いつも通りにシステムオンするもこれまた映りません！！ え〜 え〜 ええ〜 ？？？状態 ならば慣れたものですから、すかさず入力HDMI3に差し替えます。 ありゃ不思議映ります。(当然か) これで入力ポートHDMI2もお亡くなり決定?。 これはまずい！残存入力ポートはあと4つ このままでは被害甚大 アンプ更新計画ははまだまだ先、しっかり調べねばと、ほろ酔いながら夜中にゴソゴソ、 抜いたり挿したり、出力1⇆2切替えたり1+2同時出力したり、電源入れる順番を変えてみたりと、 いやぁ〜酔いも覚めました。 そこで分かった事は、プロジェクター側の電源をオフのままでヤマハさんの電源を先にオンにする、Fire TVは通電待機、リモコンにはまだ触らずと言った状態だと、アンプ表面ディスプレイの HDMI OUT1 もしくはOUT2の赤色文字が約1秒間隔で点滅するではないですか！ 映像はもちろん映りません！ 今度は同じくプロジェクター側電源オフのまま、Fire TVをリモコン操作で待機状態解除、 ヤマハさんをオンするとディスプレイの表示がさらに高速に不規則気味に点滅、 これはヤバイ！ もしや焼き切れるかと 一瞬焦る 最後はプロジェクター側の電源を先にオンにして、次にアンプ側の電源をオン、 最後にFire TV 側をオンにすると (Fire TVはアンプより電源オンを先でも後でも大丈夫そう) ひと呼吸おいて、キチンと映像出ます。(ひと呼吸の間は何やら認識するような動作なのでしょうか) アンプのディスプレイ点滅せず！ 正常状態です。 いやぁ〜これかと！ 真っ先にプロジェクターの電源をオンにすればいいんだぁ〜！？ 良かったのか、まぁ使用できればOK マイペンライ がっ ケーブル常時接続で入力ポートがやられるのかもしれない？ と言った不安から、 アンプ正面の入力ポートHDMI VIDEO AUXを使用して、Fire TV使用するときのみ HORIC 1mケーブルを差し込み、使用後はケーブルを抜くと言う方法で運用することにしました。 これならやられるまい！ まだまだぁ〜 沈みはせん と勝手に納得 さて3番目のこの入力ポートがやられるのはいつになるやら 乞うご期待、 しかしなんで入力ポートなんでしょう？ 今回購入ケーブルの出力ポートが逝ってしまうのなら 話もわかりますが、謎は深まりました。 HDMIへの供給電源の関係なのでしょうか？ 今回のケーブルそのものは買って良かったです。 プロジェクターをエプソンTW7100に 更新して映像美を堪能したいところですが、 いやぁ〜TW410も照明落として暗い環境なら十分綺麗と感じてます。 ではではまた...

Si estás buscando un cable hdmi 2.0 de 20 metros que transmita la señal 4k a 60hz sin cortes de ningún tipo, ni de vídeo ni de audio, este es el tuyo. No le des mil vueltas y te gastes un dineral probando uno y otro como me pasó a mí, incluido los hdmi 2.1. Algunos no interrumpen la señal al principio, pero al poco tiempo empiezan a fallar con breves pero muy molestas interrupciones de audio o pantallazo, y es un engorro si ya lo habías canalizado, además de la pérdida económica que supone, que suele superar normalmente los 100 euros. Con este, es posible que te gastes un poco más de dinero pero funcionará, y ojo porque hay muchos que son más caros y tampoco funcionan, no te guíes por el precio. Lo utilizo a diario desde un receptor de audio y vídeo a la televisión aprovechando el retorno de audio (Arc). Todo funciona, pero ojo porque es unidireccional y hay que conectarlo adecuadamente.

Finally I found cable that actually does what is supposed to. I bought multiple different cables to connect my gaming pc to my living room TV. And finally this was it. (I tried very budget, to mid range but always problems with signal, blackout or straight up doesn't work) This one is quite pricey but they have good warranty, and it actually works. Fairly thin, but reasonably durable (my puppy tried to chew on it, cougt him fast, but still could've been worse, cable works fine after the incident). I've been using it for months and still working well. It is expensive, I wish it was a bit cheaper 120+ euro for cable is crazy. But it does work very well I tested it for 4k 120hz HDR gaming from rtx 4090 to 4k Oled Sony Bravia TV. Would recommend and would buy again if necessary.

Can someone actually say Ruipro's customer service is actually 'too' good?! Read on... I did a lot of research, needing a 50 ft cable for my new home theater after moving into a new house with an existing theater. My previous theater used a 30 ft cable so the length was not a huge issue, but at 50 ft, I knew I'd be safer going with Fiber Optic. Ruipro kept popping up as one of the highest rated. Since I had to fish the cable through a conduit in the ceiling, I also figured a cable rated specifically for that purpose was also in order. Added to all that, I also wanted a cable that was certified, harder to find with Fiber Optic of this length. Ruipro checked all the boxes. So, I ordered it. It is indeed certified, confirmed through the app. The cable arrived in a sturdy box and was well packed within it. Careful instructions made sure to let us know this cable is not bidirectional. While I knew this, it seems some people do not and connect it the wrong way then have issues and blame the cable. One end is for Source (BD player, Firestick, etc.), another for Display such as TV or Projector). Good for Ruipro to spell this out clearly. I tested the cable and all was fine. I fished the cable through the ceiling and set it all up. It worked great. Good picture quality and refresh rate. Works well with my Nakamichi sound bar and Epson LS11000 projector. Blu-rays 1080 and 4K, great! I watched several movies with no issues. Now...a couple of weeks later we decided to stream a movie rather than watch one on Blu-ray. Halfway through the movie, the video blacked out for about 10 seconds while the sound was still going. It did this a few times. My heart sank. My previous home theater had a BenQ projector (my second one) which gave us enough of a hassle for me to change to Epson this time, so now having new issues and knowing it was not the projector I was like, "WHAT NOW?!" A litlle research pointed to the HDMI, which honestly is like a therapist blaming the parents but alas, I reached out to Ruipro not expecting much. I also placed an Amazon replacement order for the cable because unless I had a second cable to test against, I would not be able to tell if indeed it was the cable that was the problem. When something goes awry in a home theater, the process of elimination begins and usually starts with the HDMI cable. Lo and behold, while Amazon was already sending me a replacement, Ruipro contacted me and sent me one too! I tried to tell them not to, but could not stop it because Ruipro was THAT fast! Ruipro asked me to send the 'defective' one back for testing, which I would do. So, I got Amazon's replacement cable and tested it out. The streaming video still blacked out once in a while. Ugh. Well, at least now I knew it was not the cable. Then the Ruipro cable arrived. Now I had THREE cables sitting here. Guess what ended up being the issue? The Amazon Firestick! More research led me to test the Firestick (reboot, change HDMI ports, etc.) and then buy a new one. The new one worked with no issues and now streaming is perfectly fine. Apparently, this loss of video while audio still runs is a known Firestick issue, even though until now I never experienced it (I own two...well, three now). Good to know it is not always the parents...er...cable's fault. Thankfully, it was not the sound bar or projector, which would have been a nightmare, but it would have also made no sense since Blu-rays worked just fine. Why would streaming be the issue? Duh...it was the Firestick.... Back to Ruipro. I wrote back to Thomas at their customer service to explain it all and asked them how to return the one they sent me, which was unopened, so they could sell it. While I need to send back the Amazon replacement so as not to get charged for it, Ruipro told me to keep theirs! Wow. Bottom line: it is not always the HDMI cable. Also, and more importantly, Ruipro's customer service is fantastic. They go above and beyond, stand behind their product and care about the customer...these days, a miracle. So, they now have a lifetime customer in me, because I know should I ever have an HDMI cable issue, they'll stand behind it. Of course, don't expect you'll get a free cable from them just by yelling 'defective,' as my issue was a complicated one, and they WILL want your defective one to test it out (which ultimately helps us all), but the fact that they went above and beyond for me, that spoke volumes! And this tale ended well.

Muy Satisfecho !