NAOEVO 7 Inch LED Light Bar, 240W 24,000LM LED Pods/Off Road/Fog/Driving Lights with Spot Flood Combo for Truck Boat UTV ATV, 2-Pack (White)

Cord length is awesome. The quality of functionality the use the weight. The look everything is awesome. They work good in the winter time You can see better and the use is awesome I have your other ones on there that I bought from you but there were white. They were good quality too but I'm changing them out to the yellow cuz of winter. I will use those in the winter time p

Very good quality lights they definitely light up the road in front of you I need to get another set poor installation this set fell off Make sure you don't run up on a curve I'm going to mount them differently the next time I get a set it works outstanding top quality very good flood light bar assembly

I installed these on a Kubota RTV and they are just what I wanted for light at night. Bright wide beam. They were a little tricky to adjust after installation due to the recessed mount and the location of the hex head screws, but I was still able to get it done. They look good and appear to be high quality LEDs.

Bright AF! On the front of my truck. We'll worth the money, would buy again, housing is all metal, they do get abused and used all the time still functioning 6 months down the road. Would recommend, good auxiliary lighting, came with all hardware, installed in minutes as I was replacing older lights that no longer worked.

These are great fog lights, very bright. I haven’t installed them yet but I did mock up the wiring with a 3 prong switch which you can get from Amazon. I plugged it into a regular house outlet (the white wire) but if you follow my wires, imagine the connection to the outlet as the place you will connect to a battery in your vehicle and the wiring is simple.

One of the frustrating and misleading ways to advertise LED lights is to list the equivalent incandescent light wattage instead of what they actually consume. I mounted 4 of these LED lights on my 32HP diesel tractor and 2 similar LED lights on my 32HP diesel mower. Although it would be nice to put a 700W light bar on the tractor's front end loader the alternator can only supply 40 amps. My Ferris 5000Z mower's alternator is rated at 30A. I purchased these lights based on reviews and they are very bright. Incandescent bulbs produce 12-24 lumens per watt of light output and LEDs 30-90 lumens per watt. At the best extreme LEDs can be as much as 90 / 12 = 7.5 times more efficient at delivering light output on a per watt basis. The seller's claim of "effectively" producing the equivalent of 240W per light is still a bit of a stretch. 240W / 7.5 efficiency ratio = 32W. Since the actual current draw is 21W they are inflating the equivalency claim by 50% and more like 100% if the average incandescent output is 18 lumens per watt. They are what they are. Still pretty amazing for the price but when used on smaller machines the actual current draw is important. For reference these are the measurements per LED light: 1.81A at 12.00V = 21.72W 1.53A at 13.80V = 21.11W 0.98A at 20.00V = 19.6W With a 40A alternator you could use 10 of these lights and still have 25A for the rest of the machine. That lights up a field pretty well at night. I will waterproof these as they do tend to develop moisture under the lenses and this will quickly destroy the reflective coating behind the LEDs. An experienced roofer who builds and repairs metal outbuildings recommended using Geocel 2300 sealant for sealing metal to metal and metal to plastic seams. I have been using it ever since. It stays rubbery in very cold conditions and conforms to any movements by reliquifying in the hot summer sun. I love the stuff and swear by it for anything that may be out in bad weather like lights on a tractor.

Has saved my life a time or two in the deep woods at night!

Super bright, but they interfere with radio