Official Creality PETG 3D Printer Filament 1.75mm 1KG (2.2lbs), High Precision, Strong Toughness, Odorless, Better Flow, Moistureproof 3D Printing CR PETG Filament, Black

⭐⭐⭐⭐⭐ Best PETG I’ve Ever Used – Creality Has Nailed It! I’ve printed with probably a dozen different brands of PETG over the years (eSun, Overture, Inland, Hatchbox, etc.), and the Official Creality PETG in black is hands-down my new go-to filament. It’s genuinely flawless right out of the box. Why it earns 5 stars: Zero moisture issues – Came perfectly dry in the resealable bag with a fresh desiccant pack. I printed straight away in my humid garage and had no stringing, popping, or bubbles. Insanely consistent diameter – I measured multiple spots with a micrometer: 1.74–1.75 mm all the way through the spool. That translates to perfect first layers and no clogged nozzles. Flow & layer adhesion are outstanding – Prints like PLA in terms of ease, but with real PETG strength and flexibility. I’m getting stronger, tougher parts than with any other PETG I’ve tried. True black color – Deep, glossy, rich black with no translucent or grayish tint. Looks premium once printed. Virtually odorless – My wife usually complains about PETG smell; she didn’t even notice I was printing. Runs perfectly on my Ender-3 V2, CR-10, and Bambu X1C – Stock settings from Creality’s website worked on the first try (245 °C nozzle, 80 °C bed, 40 mm/s). I’ve already gone through two full kilos doing functional parts (drone frames, tool holders, outdoor brackets) and everything has come out tough, impact-resistant, and beautiful. No warping, no delamination, even on big 10-hour prints. If you’re tired of babysitting cheap PETG that strings, cracks, or arrives wet, just buy this. It costs a couple bucks more than the budget brands, but it saves so much time and failed prints that it’s actually cheaper in the long run. Creality, please never discontinue this stuff! Already ordered four more spools. Highly, highly recommend.

This PETG filament worked great on my Bambu X1C after tweaking the profile a bit. I had some minor stringing at first but this was solved by slowing down the print speed a bit and ensuring that the fillament was dry. I did not experience any clogging, stringing, or other issues after making the tweaks. The spool was well packed and the vacuum seal was intact. It loaded and ran easily in my AMS unit. The quality of the filament and the color are great so far.

This PETG filament really impressed me with its excellent quality. It prints smoothly with strong adhesion and no clogs. The parts come out sturdy, clean, and with a professional finish. It maintains stable temperatures and produces very little stringing. Perfect for functional projects. Highly recommended.

Absolutely Amazing 3D Printing Filament! Works Amazing In My Creality Ender 3 V3 SE. Prints Smooth And Almost Flawlessly. With A Little Glue, It Sticks Amazingly To The Bed.

Great quality, prints very well, very rarely has an issue. There are definitely issues, however, with the winding of the filament. As others have mentioned, there are occasionally points in the spool where the filament is almost tied into a knot, which will ruin prints if you don't catch it in time. My go-to brand for filament.

Great filament that runs perfectly in my P1S with generic settings. You could probably dial it in further but works good the ‘lazy’ way too.

It's PETG. It's shiny. You can see lots of lines even on perfect prints. I don't know if I should ever give 5 stars to PETG, but I will on this. It printed well for me. I had no issues with moisture or tangles or anything like that. It would be nice if the spool was reusable. That's probably the only real complaint. The color is really very nice. Deep army green. I printed it with the generic PETG profile on my Elegoo CC printer and every item I printed came out as nice as could be expected.

I was apprehensive about this filament as it is not listed as high speed. Even Creality's own site suggests that it is a standard PETG printing at normal speeds. However, the price was decent and I assumed that I could still find a use for it even if it needed to be printed slowly. After a couple successful prints at generic standard PETG speeds, I decided to try it at a full high speed, high flow profile. It had no issues and completed the print successfully at high speed on the first try with no calibration. Bed adhesion is in line with other brands, and possibly better than some I've tried, to the point that I've sometimes needed to cool the bed to remove the print for fear of damaging the plate. On to the negatives. This stuff is shiny. I don't mean a little glossy, I mean oil spill, is that wet paint shiny. If that's what you're going for, great. If not, good luck dulling it down. This is not dependent on heat or speed, even sitting on the roll it looks like wet ink. A single test coat of matte finish that is typically more than enough to knock the shine off other brands seemed to do nothing. Strength may also be an issue. One of the reasons you print PETG over PLA is strength. I'm not sure you're getting that here. Some of my prints were downright brittle, with pieces that appeared to be fine snapping off with minimal pressure. Of course, I assumed it could be due to me running it too hot or too fast, or from wet filament so I dried it (again) and experimented with various speeds and temperatures with no noticable difference in print quality or strength. However, even this was not consistent. Parts that were thick enough did not seem to have an issue but parts with thin walls or small details either turn out fine, or wishing they were as strong as PLA. I'm not sure I would buy this again. On the one hand, it performs above the rated specifications. On the other, I have a hard time trusting the strength. Whether that's due to quality control or just normal for this brand, I couldn't say, but I also don't feel the need to find out with so many other options available.

Creality ist ja eine sehr bekannte Druckermarke, und so wollte ich auch das transparente Filament von denen kaufen. Es ist gut und anfängertauglich druckbar, mein Kobra S1 verarbeitet PETG generell gut, und mit diesem Filament geht es genauso einfach. Für Modellbausachen geeignet, man kann damit z.B. Glasscheiben, Lampengläser und andere transparente Sachen drucken. Manches davon muss man danach immer feiner schleifen und letztendlich auch noch polieren, damit es wirklich gläsern wirkt. Ob das alle Filamente hinbekommen, weiß ich nicht, aber mit diesem hier geht es recht gut.

Bra filament för priset, sitter fast hårt på plattan.

Bon Filament pour 3d

Facile d’utilisation, j’aimerais cependant trouver d’autres couleurs pour multiplier les projets en cours.

Exactly the color needed for printing my lifesize Star Wars Battle Droid!! Quality of the filament is excellent would happily buy again if it becomes available again!