A-Premium Exhaust Manifold Kit Fit for Jeep Compass Patriot 2007-2017 & Dodge Journey 2009-2020, Avenger 2008-2014, Caliber 2007-2012 & Chrysler 200 2011-2014, Sebring, W/Gasket, Bolt, Nut, Washers

works great and is metter built and seams reinforced to help with cracking

My original manifold had 4 hairline cracks. This leaked a bit of exhaust and threw off the oxygen sensor readings causing error codes. The new manifold fit perfectly and resolved the error codes.

Fit like a glove

Worked great for my 2016 Jeep Patriot 2.0

Fits as described but don’t put it on right away, certainly needs a little prep work.Get what you pay for, definitely better than what was on the car, but definitely needs ground down before you put it on. All the bolt holes lined up, however you may have to modify the heat Shield to get all the bolts in. Make sure you clean it before you put it on too. It will smoke and it does stink for a short time, didn’t really think about it as I had installed it twice already.

I’m trying to get a couple more years out of my 2014 Jeep compass. It’s had a pretty bad exhaust manifold leak for a while, I decided to go cheaper on this part, can’t justify OEM price on a vehicle with 190k miles.The only issue I ran into on this, was bolting the nut on one of the studs, even a thin wall socket couldn’t get it done, I took my Dremel and had to grind it down just a little bit in order to have clearance.For the price, that’s not a big deal to me at all, and it works fine.

Worked

This went on very easily. The cast doesn’t look pretty but appears to be more substantial than the OEM part. One thing I had to do was grind down the corners of the manifold where the nuts for the studs go. The flange nuts would not screw on after installing the manifold because the hole for the stud and edge of the exhaust tube were too close. Grinding a flat with an angle grinder solved that. I didn’t bother flattening the flange face (although it did look shoddy, poorly lapped) since the provided gasket was thick and pliable instead of thin piece of steel. Hopefully that makes a good enough seal.