Penguin Pottery - Specialty Series - Unicorn. Mid Fire Glaze for Clay, Pottery Glaze, Cone 5 and Cone 6 - Ceramic Glaze for Pottery (1 Pint | 16 oz | 473 ml)

Love this glaze with its depth that shows a hint of gold within the structure of the glaze. Turns brown in contact with clear zinc free glaze (HF-9). Quite runny so provide a dam grove at the bottom of the piece to catch and control the run.

Love this glaze! Easy to paint on consistency and once fired it’s a beautiful glaze. I’ll be trying more of their products.

Complex, deep blue, whitish bits, goes on thick. After stirring the big clump out, it still came out a bit thick, but honestly this is one of the most beautiful glazes. It's like looking into the deep blue ocean with depth and wave complexity. The camera doesn't do it justice and its much deeper and blue in person. Stunning color

I'm not one to leave reviews. If I get a product that works, I rate it accordingly. unfortunately, thats not the case here.what I received was a watery pint jar that I thought I had to mix. I've made my own mixes before and I stirred and stirred. at some point, it should mix into a thick-like (cream) consistency. This didn't happen. I followed the limited instructions on the jar, and fired it in the kiln and the coloring came out brown. like 80's paneling brown. No sparkle or pooling. so I mixed it again and even added gum (Arabic) to it and it didn't thicken up. then I realized what I thought was the bottom of the jar...was SOLID MATERIALS OF THE MIX. Again, I've made my own mixes off of Glazey; I have had them on my work shelf for over 6 months and I CAN STILL MIX THEM to make a glaze with a whisk. I mixed this glaze with a whisk, but it didn't work. I grabbed my drill mixer and it sort of worked but remained watery. I mixed it for over an hour and finally got the materials somewhat mixed. I brushed it on and shoved it in the kiln. still came out 80's wood panel brown. I'm sorry but the lack of quality has turned me off from any more purchases from this company. Please, fellow potters, do not try this mix. it'll waste your time and money and worst of all, your work. I'm thankful I tried this on a test piece because it was the worst.

Pros:1. I like the color and goes well with the blue ultramarine celedon fom same vendor.2. Easy to apply with brush, but need to make sure the glaze is very well shaken before applied.3. This glaze RUNS! So it can create nice effects, but DO NOT apply more than 3 coats or you could stick your piece on the kiln.Cons.1. I think the container could be better. There was no cover between the cover and the jar, so consequently the glaze on the cover after shaking was messy and when you put the lid back on the jar it spills and makes a mess.2. If not mixed well, you could have an over-run. The ting is, you need at least 2 coats, so plan very carefully where the glaze will go.3. It is pricey …

I absolutely love the way this color turned out after stirring for quite a while. I ended up using it to glaze a few things and thrilled how the color that came out. I only did two coats because it was so thick. I figured it was comparable to three coats. The color is Ultramarine. I also bought the color Enchantment, which was only 2/3 of the way full and very thick might be sending back.

Excelente producto

Pretty but not at all like the images. Look:The mug one the left is this glaze