Onetap Magnetic Ring

I tried a couple of the other cheap magsafe stickers before I got this one. The cheap ones are, well, cheap. The Spigen is pretty great. I didn't use the alignment tool, but was able to get it attached to my Pixel 9 fold with ease. The standout feature is definitely the adhesive. Once attached, it is going nowhere. I actually tried to take it off and add it to the case of my pixel 10 fold and was unable to get it off...so I bought another, as the pixel snap magnet thru the case was a bit weak. The magnet is strong and works as designed. Long story short, this one is worth the extra couple of bucks.

Just the ticket for adding Magsafe capability to your Android phone. I used this on my Pixel 8 Pro and it works great. The package has minimal directions so you need to be careful when installing it because placement of the ring is critical. However, the included plastic backer that the ring is attached to has vertical and horizontal lines inscribed on it. Line up the backer so the same number of lines show above/below and on each side and the ring will be located correctly. Do this without peeling away the plastic covering the adhesive surface first so you have a good idea where you're going to place it. The adhesive is a quick grab so you don't have a lot of wiggle room if you get it wrong. Once placed on the phone case, rub the ring well with pressure. The adhesive is pressure activated and if you don't press very firmly it won't reach maximum strength and may give out when removing the phone from a magnetic dock. Let the adhesive cure for 24 hours before using a Magsafe charger or accessory. (Similar to 3M UHB tape.) My phone case has a lightly textured surface and I've had no issues. The ring shows no signs of detaching or peeling off and is super strong.

The magnets work great. Not the strongest I've used, (Rokform) but really it's the perfect amount. I have an S23 and you can get it to stay on some metal objects. It snaps into position very well and actually holds on accessories and mounts. I love the look and feel of it. I did have problems with the installation. It's not very clear where to put the ring. I assume the very center, but on my S23 that's not even possible because of the camera lenses. I used a metric tape measure and just got it as close as possible to one of my cases that came with a MagSafe ring built in. It's probably because I used a textured case, and it recommends you don't use a textured case, but I had a hard time getting it to come off the installation plate. It could also be that the camera protruding keeps it from laying flush with the case. Once I got it on, it was holding very well with no issues. It would be nice if they told you the numbers to line it up on for each phone. Although using a USB insert with an alignment works better, it keeps the product from being up-to-date. I think Spigen's alignment tool is a happy medium. It wirelessly fast charges on my Anker charger. I haven't had it long enough to see if it gets hot, but it has on all my MagSafe cases, so I don't think that's a good way to gauge the alignment. Update: I've bought this multiple times for multiple cases. The first ones I bought the magnets were not as strong as the ones I bought later on. It's not a huge difference, but I can put the ones with the newer magnetic rings on my fridge and it doesn't slide down at all. Only the first two I bought slide down.

After much frustration with the crappy "magsafe" cases for my Galaxy S21 Ultra, I found this product. I bought the Spigen Rugged Armor case and installed the ring on it. It looks like a slightly textured surface on the case but feels smooth and the ring seems to stick really well. After the initial application I applied pressure to each bit of the ring for 15 seconds to ensure the best connection. So far, it's holding well, and is strong enough for me to stick the phone to the fridge, if I'm using it for a recipe when cooking or something. One other case I bought didn't even have magnets, it was just a metal ring that wasn't securely attached. Another case was magnetic but not very strong, and it introduced some problems with my wide angle camera lens (boca). So to find this and have it work so well is really awesome. I just hope the adhesive lasts-it is 3m so it should be good. Value for money...I honestly think the MSRP is pretty ridiculous but at the sale price of $15 I feel it's a great value.

First, I love Spigen products. I've been using their cases exclusively for years. This ring works very well -- strong magnetic connection. The slight protrusion from the back of the case isn't noticeable when other accessories are attached, and it can be helpful for gripping a larger phone (Pixel 9 Pro XL), providing a little extra bump out. The instructions are clear, and the installation process is easy. Two issues I have: - the straight extension piece from the circle doesn't hold very well, the glue is not holding. The circle, no problem - the positioning in the instructions seems to not put it in the optimal place for charging. Battery packs heat up substantially when centering the ring, per the instructions, and do not charge quickly. The Spigen Cryomax 3 seems to not have this issue, though. But I ended up replacing the case entirely with a Spigen case with the ring built-in, and that case positions the ring about .25" lower, and I don't have the heat issues that I did with this ring.

Gemakkelijk aan te brengen, sterke magneet.

Spigenin kılıfları severek kullanıyorum. Markaya güvendiğim için bütün ürünlerini gözüm kapalı alırım. Henüz Ürünü kullanmadım ama paket içinden çıkan yerleştirme aparatı cok iyi düşünülmüş. İndirim de satin aldım. Güncelleme: Ürünü kullanmaya dün başladım ve neden daha önce kullanmadığımı sorguladım. Mıknatıs çok güçlü. Buzdolabına tutturup iş yapıyorum :)

Very strong adhesion and works perfectly with magsafe accessories. The alignment tool is also very nice.

Installs easy, the magnet is strong. It's also stylish and adds a touch of style to my case, Spigen Sony Xperia edition. Spigen is a no brainer. Just works and lasts.

The Spigen Metal Ring Plate (MagFit) Compatible with MagSafe in Black is a product designed to enhance the functionality of your MagSafe-compatible device. To assess its value for money and best features, let's break down its key aspects: Compatibility: The Spigen Metal Ring Plate is explicitly designed to work with MagSafe, ensuring a perfect fit for your Apple devices. This compatibility ensures that it will work seamlessly with your iPhone or other MagSafe-compatible devices. Quality and Build: The product is made from metal, which not only adds a premium feel but also ensures durability. The black color adds a sleek look that complements your device's aesthetics. Easy Installation: One of its primary features is the ease of installation. You can attach it to your device or its case with little effort. The adhesive ensures a secure attachment without leaving any residue upon removal. Magnetic Strength: The metal ring plate enhances the magnetic connection between your device and MagSafe accessories. It ensures a strong and stable connection, preventing accidental detachment, which can be a common issue with some other non-MagSafe accessories. Functionality: It serves as a handy addition for various purposes. You can use it with MagSafe-compatible wireless chargers, wallets, and other accessories. This adds value to your device by expanding its functionality. Value for Money: The value for money largely depends on your usage and needs. If you frequently use MagSafe accessories or need a stable and reliable connection, this product offers a cost-effective solution to enhance your device's capabilities. Durability: The metal construction of the ring plate ensures longevity. It is resistant to wear and tear, making it a good investment for the long term. Design: The sleek black design complements the aesthetics of your device without being obtrusive. Customer Reviews: To get a better idea of its value, it's helpful to check customer reviews and ratings. This can provide insights into how the product has performed for others.