4.3 Inch Color TFT LCD Color Car Rear View Display Screen Monitor Auto Parking Rearview Reverse Backup Monitor
Description
- This monitor will show you the blind spots where your eyes and mirror cannot reach even during dark environment,really advoid a lot of trouble when reverse,driving more safe! Eliminate Blind Spots -- This monitor will show you the blind spots where your eyes and mirror cannot reach even during dark environment,really advoid a lot of trouble when reverse,driving more safe 4.3 inch--Contrast:350:1--NTSC/PAL TV system--480 x 272 Pixes--12V/24V Power System 2 Way AV input, Yellow connector:AV1 input,White connector: AV2 input,Support AV2 reversing priority,automatically display rear view image when you reversing,more convenient than manual switch 12V-24V Wide voltage, Work well with your existing OEM or aftermarket front side rear view camera with standard RCA input,used for 12V/24V vehicles like Car,SUV,Truck or Van
Overview: As a professional supplier of top-notch consumer electronic products,RAAYOO aims to only provide better products at lower prices. We go to great lengths to research and improve our products all the time. With this top-of-the-line and easy-to-install TFT lcd monitor, For convenience, after being installed, this monitor system will start up automatically whenever you reversing. This monitor is a key part of a rear view system that will definitely enhance your driving safety in all driving conditions.Specification: - Size: 4.3 inch - Housing: ABS Plastic - 480 x 272 Pixes - Color: Black - Working voltage: DC 12V-24V - Environment humidity: 10%-90% - Working Temperature:-20℃-+60℃Installation: 1. Choose a suitable monitor location in your vehicle that will not block your view for safe driving. 2. Clean the mounting area you chosen with alcohol to remove the dirty or residue 3. Peel off the protective film from the adhesive tap bracket and then stick the pad to the desired location. (NB: Once put in place, the mounting pad cannot be easily removed. Therefore, before mounting, please be sure of your desired location.) 2. Adjust the bracket of monitor to its best position. 3. Connect the red power wire of your monitor to the positive terminal of 12V DC power and the black one to negative terminal. 4.Connect the white connector(AV2 support reversing priority) of monitor to the video cable of your camera.Package content: 1 x RAAYOO 4.3 inch Monitor 1 x Power Cord(1.5m/4.5ft) 1 x RAAYOO User Manual
Reviews
S**Y
Great images, horrible mounting stem.
Product arrived in 2 days, packaged well. The box included instructions that are not very helpful (lucky for me I've installed a camera to one of these before). Installation was easy enough, cords were long enough to tap into my existing lines, if you need to run new positive and negative lines, you will need your own wire. Video feed looks GREAT that is why they still got 2 star, but the thing can't even hold it's own weight. Gravity pulling on the screen will make it droop forward, the stem isn't made well enough to hold itself upright. If I didn't have it all wired up and installed already I would have sent it back. It's ridiculous that it can't hold the screen upright. I will be taking it off the stem and flush mounting it on my dash so it doesn't keep falling forward. Picture attached. Sticky base actually sticks on very well, wish the pivot point didn't fail.
C**6
Would recommend it highly.
Easy enough to install that I put them on both our Honda CR-Vs, and now my daughter and I have complete confidence backing up knowing we are constantly aware of what's behind us. The wireless one has intermittent blinking in the screen but not enough to be a bother -- unless you're that anal and inclined to find fault about a lot of things, but that's quite understandable.
D**W
Works great once I gave it a signal
Ugh, dead on arrival. I unscrewed the back of the lcd and probed around. 12Volts is making it to the board, but the backlight doesn’t turn on and no image is displayed.Edit: It was my camera that was dead. The LCD doesn't turn on without a signal.
C**A
Gives a good reverse view and fits into windows mount bracket (not ...
Replaced broken monitor. Gives a good reverse view and fits into windows mount bracket (not using the sticky mount enclosed).You can use the 2 video inputs for 2 different inputs but the backup camera will take priority.
S**R
Adjustable stem broke off
While the screen seemed to work fine, the plastic piece that holds the camera onto the little plastic stand broke right in the middle, so now its useless to me, and its too late to return it. :-(
M**L
Dead on arrival
This item did not work out of the box. I applied power to it from a regulated bench power supply, fed its an input signal from several devices and *nothing*... Junk.
C**T
not dead
needs a video input for the screen to light up works well with a fpv receiver.
W**R
Five Stars
Installed easily. Crystal clear view. Perfect.
Common Questions
Trustpilot
1 month ago
3 weeks ago
