Neewer 50in1 Action Camera Mount Kit, Red, Compatible with GoPro and Other Brands

As a noobie to action cameras, I was overwhelmed with the variety of mounts included in this kit.To start, if you've never had or used a NEEWER product. This will come to be something you regularly pick up. Why? There's a good quality in all of their products at a good price. Something to note, the pictures don't do the red justice. Look at them from any number of monitors or phones, the red looks a whole lot brighter similar to a sports car red or a Mario hat red. In person, I see something more of a maroon shade. With dark or brown shades. Frankly, I like what I've got better than the red I was expecting to receive.This case comes with an included manual, in various languages, that demonstrates what and how each piece is meant to be used. Lots of thumb screws that you'll use with a bunch of your mounting devices for your action camera.The selfie stick took a bit to figure out as I initially turned the handle and not the rod itself. This could possibly be better covered in the manual. At the time of testing, all that was stated was to twist, but I can no longer find where that information came from.Overall, if you need an economically priced action camera mount kit, look no further. The NEEWER is that kit. It will cover any activity you wish to capture.This is worth 5-stars.

This is the second large set of Gopro style action camera mounts. The material feels like sturdy ABS and the straps are of decent grade nylon. The chest harness had enough adjustment range for me to get a nice fit even though I wear a 2xlt shirt usually. The mini tripod is a lot sturdier than I expected as is the selfie stick. My only gripe is that they only include 4-square adhesion pads and 2-semi oval ones. The adhesive worked fine, especially if you heat the material with a heat gun until it gets a few tiny bubbles, then place it in its final location, it will require heat to remove but it's the best way to get a fierce grip. I really would have liked to have had either a few more mounts with adhesive already attached or at least a dozen extra adhesive pieces. It's a small issue since you can use aftermarket double-sided tape that's much thicker but was surprised to see so little included. The case is a nice firm sided case with zipper mesh interior and spots for all the attachments but it's a tight fit since they are very generous with the selection. Would be a great side gift for someone who just got into action cameras, or someone who goes through alot of mounts due to hard abusive use and needs a good value stand in.

DO YOU WANT TO BE EQUIPPED WITH MOUNTS? THIS WILL PRETTY MUCH TAKE CARE OF ALL YOUR NEEDS. This set comes in a nice case kind of multi shades of burgundy "texture" cloth covered case. it comes with so many attachment options. Some you may already have if you bought inexpensive actions cams that give you a good set of mounts when you buy them. Such as AKASO , XTU etc. But you wont have everything that is in this pack! The bottom portion of the case is foam compartments. The top part is a zippered mesh pocket with divided pocket spots. just one big compartment. The handle is around ½ inch wide nylon webbing. But is has a soft, grippy handle over it making it wider and distributing the weight from the strap.Now you will have Back up mounts along with new types of mounts. Now if you bought one of those EXPENSIVE ACTION cams like a Go Pro, DJI OR Insta 360 etc. The expensive one that cheap out and don’t give you "any" attachment/mounting options... This Is The Kit For You!It is a large carrying case, but of course it is hard to fit everything back in neatly. Like most things these days. You have to rely on that zipper to close it up and hold it closed. Gotta hope that medium weight "coil zipper" is strong enough to last. I bought this case primarily for the case and several of the mounts. (I thought it might be "smaller" and also hold a camera or 2. But neither of those things are the case.) I wanted the chest mount, the float. I wanted to check out the clip mount for. It has a strong spring and some good teeth on it. It should be able to hold a light action came to a nice backpack shoulder strap. Especially if it is soft or padded and the teeth can really "bite in". I have not tried it hiking yet but I did clip it on day pack shoulder strap and it appeared to bite in and hold on pretty tight. I wasn't sure if I wanted the head mount. It is made of nice wide all elastic cloth straps, and plastic buckles. It has a some stripes of "sticky silicone" on each side to help keep if from slipping around. But I think for me it is something that would drive me crazy being tight enough on my head to hold the camera? and get itchy? But if you like those kinds of mounts, it looks like this one should work good for you. The Chest Mount is made of All "elastic cloth" straps, just like the head mount only thinner. It is NOT just made of nylon webbing strap as it Looks like. It Fits me, a full sized adult male. I think it will work good. I look forward to needing to use it on a hike. I put the float in a full sink under plate to hold it down, for hours. It did not leak water into it. I know that is Nothing like scuba diving or snorkeling. But it is winter and that is all the more testing it is going to get. ;-)The Tripod in it is better quality and bit taller than I thought. It is all grippy rubber joints that make up the legs. The "mounting head/ball joint" is metal. All you have to do is lightly tighten the Tab and it is locked in place nicely. You don't have to twist it down very tight like you do with those cheaper plastic ball joint mounts. It looks like it can be Useful. It is NOT just foam joints with rubber feet like and plastic ball joint mounts like you see at "the dollar" store. (although those do have their uses...)The Selfie stick is a bit better than I thought it would be. It has a nice grippy rubber handle. You slide it out and turn it to the left to lock it and turn it to the right to unlock it. Not long but useful. I don't know I've never used one.The windshield mount LOOKS the same as one I ordered before. I had problems with it wiggling around. I don't know with these cheap plastic one you really have to tighten them down. and then maybe they will work for you. Probably a better chance working with light weight action cams instead of cell phones??Wrist mount looks sturdy. I don't know what you are supposed to use it for. If you held on to handle bars I think the handle bar would be bouncing around everything and you would always be changing the angle of the camera. Maybe I'll figure out a use for it later when I am not tired. ;-)It comes with a little nylon synch bag that you can carry around your most used mounts/brackets with you instead of bringing along the entire big carrying case.IT HAS "BOUY", like a waterproofed sealed up foam block. There is no way to attach it to anything. I Have No Idea What It Is For or how to use it??The "bicycle handle bar mount. Is "bigger" and much sturdier looking that I was expecting.I'm not sure exactly what the adhesive disc with the string attached is for? are you supposed to stick it on your helmet and tie the string to your camera as a back up in case your camera falls off?A few cut out spots in the cases foam were empty when it came. I'm hoping the just came loose and were floating around in the case. Hard to say. There is so much stuff in here the important stuff is there and more. it is not worth counting things to see if anything is missing. :-)) (the foam is soft and kind of sticks to things, and can be crushed. Not sure what its life expectancy is.All of the mounts that I have tried did grip and hold my camera securely. (AKASO)BUT DON'T LOSE THE MOUNTING HOUSE BRACKET or the WATER PROOF HOUSING for your specific camera. It does not come with those. You will need those camera specific parts to use these accessories with cameras don't have screw mounts or flanges on the bottom.Whatever the case. If you don't have many mounts. or if you are interested in the major things that don't come with "any" cameras like I am. YOU CAN GO AHEAD AND GET THIS AND RELAX KNOWING YOU HAVE MOUNTS FOR PRETTY MUCH ANY SCENARIO. And some back up parts if your camera already did come with Some mounts. It is pretty much the--- "what you need some mounts and attachments?... You've Got Em Now!" kit.

If you own an action camera regardless of the name brand this is a bag of tricks you'd want in your arsenal. From bady mounts to to tripods this bag of tricks got you covered from almost any scenario. Such as the floating mount for on the water shots. The suction power on the smooth surface mount is strongbas your action camera. This bag of tricks really does hold value for money.