FixTheBog® Professional THRU WALL Outside Garden Tap Kit complete meets Water Regulations GT1 DIY Outdoor Tap Kit includes a 350mm Through Wall Flange isloation valve for winter drain down

Received this kit and thankfully was not in the slightest overwhelmed, i am an average DIY enthusiast at best and this took little over an our to complete. As some have already mentioned the hardest part is drilling through the outer wall. Once completed its a simple case of adding the splitter to your system and placing the copper pipe through the wall and connecting, that is basically the complicated bit under the sink done. i found dealing with the outer wall a little trickier i had to have a few attempts before the tap would line up vertically, but as i said average at best. Slight con is the hose connecting to the water line could be longer and instructions would be nice but plenty of you tube videos out there and the purchase of a longer hose is relatively inexpensive if required. lastly please check to see if copper flange is long enough to go through the whole outer wall and a little more length just for some added peace of mind. Overall a good bit of kit and a great result.

Well mad a job that can be a pain really simple. All the parts good quality and easy to use. Instructions are good if you need them but the kit does make it simple. Make sure you get the right size SDS drill bit to get trough your wall then it’s as simple as one two three. Took 45 mins from start to finish and just a little extra tighten on the pipe fitting. They do different length copper pipe so just make sure you buy the right length kit to prevent yourself having wasted your time installing.

Overall its a decent bit of kit and works out cheaper than buying it all individually. Unfortunately the copper flange was too short for the wall in my new build and finished flush with the plaster, so had to purchase an additional pushfit connecter and borrow a short length of copper to make long enough. also had to purchase a 1.5m flexi hose due to issues where to locate the tap, but would probably have reached if my tap was directly behind the sink. Would also be good if they provided something to sleeve the copper through the wall as i bought some 20mm conduit to sleeve it.

Great kit with everything you need. The kit was easy to fit and relaxed an old tap that was just a hose going through the wall with a self cutting adapter. This kit is far superior and looks a lot neater on the exterior wall. I am very proficient with diy so this was a breeze to install and anybody should be able to fit this. Only upgrade I would perhaps recommend would be to swap the compression fit T-piece for a push fit as will be a lot easier for some to install.

Everything went together as per instructions, all components were good quality and everything I needed (apart from tools) was included in the box. I would recommend! 👍

Easy to fit with average DIY skills. I worked out you need this type rather than punch through so I can use the power washer due to water flow rates. I used a 16mm drill to get through and but would recommend 17mm. I started from the outside for a neater finish to what you see and just worked out where to start to get the entry on the inside I wanted. I put the tap on, and just unscrewed it and moved the whole thing a ⅓ when I wanted it to be upright and tight enough.

I specifically ordered this particular kit as it not only showed in the photograph but also specified in the listing that it contained a 'Push Fit' Flexi connector. I knew I would be installing this in a very confined under-sink area and envisaged how tricky it would be to tighten a compression connection so this kit seemed ideal. What was sent, however, was unfortunately a flexi connector with a compression joint end and I had to spend some time removing a shelf and contorting myself to fit 2 spanners around the joint and tighten it. The tap is now installed and works perfectly but the job would have been so much quicker and easier had the advertised part been supplied.

Great bit of kit that saved me money. Much cheaper than getting a professional plumber to supply and fit. Took me about half an hour and I've never done anything like this before but the instructions were easy to follow and the items are good quality!....

installation rapide, conforme a mon attente , livraison rapide parfait

Matériel reçu sans aucune explication. Pas un seul plan de montage, un petit schéma, NON RIEN. N'étant pas plombier, j'ai renoncé à l'installer.