Magpul Rubber Recoil Pad for Synthetic Rifle Stocks, Enhanced Rubber Butt Pad, 0.70"

This enhanced buttpad is fantastic, it fixed the slightly short LOP on my favorite stock position. This pad does stop my stock from fully collapsing and locking but will travel about half the distance so overall you gain 3/4 of an inch or so and since the stock wont lock fully closed you loose that click on the stock as well, so overall it adds maybe 2" to your gun, but it is well worth it. (if your buffer tube has a flat rear end your stock will collapse fully with this pad, only the slant back civvie buffers interfere with this pad) The original pad was hard and slippery providing no traction, and very very little recoil reduction if any, with the original pad i could never really find a comfortable shoulder purchase, not a problem i had with the A2 stock. The replacement is "skeletonized" and does provide alot of traction just because of the little bit of give the pad has, I can really lock the gun into place, and do it very quickly, with the original MOE pad i could never seat the rifle comfortably therefore I could never get into shooting position quickly. The Enhanced Butt Pad fixed all of these issues it took literally 1 minute to install and for only $15 it is a must have if you own a MOE stock. worth every penny and fixes my only complaint with the MOE line of stocks, M.O.E STOCK WIGGLE FIX: 10 cents if that, and 2 minutes of time. like i just said the enhanced buttpad fixed my only complaint with the MOE stock, well the wiggle was my first complaint. I fixed that quickly and easily and the stock has no wiggle, well none that matters maybe .5 mil of side to side play, if done right. What you need to do is take the MOE stock figure out with the new buttpad on where your favorite stock position is. mark the buffer tube with a sharpie so you know where your stock ends and your buffer begins at your most used position. this is your tape line. Take gorrila brand duct tape. GORILLA BRAND ONLY its the best tape mil spec might be ok, but gorilla is the best for thickness durability and stickyness. Clean the buffer as best you can just a good wipe down, to get as much oil off, then take a strip of the gorilla tape, about 2-3" long 1/2-3/4 width that it comes off the roll, and then lay it on top of your buffer tube down the length of the tube, ensuring your tape doesnt touch the sharpie line (the end of your stock) then simply slide your stock over the duct tape and the thick gorilla tape will fill the gap between your stock and buffer. you may have to play around with the size of the tape strip, I made mine as tight as possible, sacrificing some adjustment speed.... maybe a full second? for a tight locking stock. you can do whatever you want, and if you keep the tape behind the line of the stock it will last a long time. After you do this if your results are anything like mine your MOE stock will be just as tight and rattle free as its more expensive ( double $$$) locking brother, the CTR stock

This is a wonderful upgrade to the stock pad that comes with the magpul ctr stock and I really wish it just came with it. I'm glad I didn't listen to the negative reviews as I love this pad and ordered 3 more. While I can agree that it could be softer and more cushioned it's exactly what it's supposed to be in my opinion. Overall worth buying

It is sad that magpul doesn’t install this by default. Easy installation, precise fit and comfort during use. PCC has very manageable recoil, I’m sure that with this pad it will be even softer.

Great product at a fair price

NOT for MOE SL-K. seems good, thought I had confirmed correct. fits some range of MOE stocks, does not fit "MOE SL-K". appears Magpul does make one for SL-K ('MAG349') (same exact product description, different p/n)

Very nice, easy to install can't go wrong,

Not really sure if this is needed, but I went ahead with the purchase and am very happy with the product. I bought this "enhanced buttpad" for my magpul CTR stock, and fitment is outstanding as expected. The buttpad comes with two extra screws with their own locktite on it, but I just re-used the screws that were used with the CTR stock buttpad. The screws are absolutely the same.... so i didn't find a need to use "newer" one per say. This buttpad adds a little more support against recoil, but as many know, there isn't much of a recoil with a 223 anyways. However, for the price and added support, and even for its great comestic appearance on the magpul stocks, its a good investment. Just becareful taking off the stock buttpad off whatever magpul stock you are modifying. There are to plastic clips that also hold the buttpads in place regardless of the two screws used. When you take a look at the new enhanced buttpad, you will see the two plastic clips also, which will help you understand how to remove the original one as well.

First off, these rubber butt pads will NOT fit the Magpul MOE stocks, despite the claim in the description (minus 2 stars for that). However, they DO fit the Magpul Fixed Carbine Stock and work really well. They're easy to install on the fixed carbine stock, using existing hardware and a couple of side tabs. And, they add a significant amount of (hard) rubberized padding and nearly another inch to the length of pull by effectively extending the rear of the stock. I like the grippy texture on the back of the pad, as well. Comfortable to shoulder and hold. Now, if only the seller would edit the description and remove reference to the other stock styles that simply will not work. Maybe then I'd give it 5 stars.

Item is what it is, arrived a week prior to expected delivery date, it is a harder rubber but still has more give then original0.30” pads, slapped right onto my ctr with no problems at all, any reviews saying it didn’t fit without modifications has a simple explanation, their buttstock is commercial spec and this pad is only available for mil-spec!

I didn't buy this for recoil reduction, as it will be on an AR chambered in .223 / 5.56. I bought it to extend my PRS stock, and it does that perfectly, although not by much. In my case, I didn't need much. Satisfied with the purchase.

Mega schneller Versand+Zustellung, Produkt wie erwartet - gern wieder!

Sono soddisfatto , l'articolo si fissa con molta facilità , consiglio di mettere sulle alette laterali, un po di olio per farle scivolare meglio nelle sedi,( ho visto che qualche acquirente precedente a avuto problemi), dotato di due viti ma sono uguali come lunghezza a quelle che avevo già. Io personalmente , l'avevo acquistato perché il mio originale mi creava sulla spalla delle micro lesioni ai capillari, soprattutto nel allenamento in bianco , anche con questo non ho risolto più di tanto, anche se ammortizza di più, ho aggiunto una striscia adesiva in gomma nera morbida ( ma questo era un mio problema personale) l'articolo ammortizza di più del originale.

Passt perfekt!!! Dämpft super