2.0M LED TV Backlight USB Bias Lighting with 16 Colors and 4 Dynamic Mode for 40 to 60 Inch HDTV,PC Monitor,Led Light Strip.(4pcs x 0.5m Led Strips)

Still going strong years on. Great quality. Easy to use. Comes with a remote control but nice setting it on rotating colours. Does not reflect what is on the TV just random colours.

Easily applied to back of TV , brightens up the back of the TV , different colours modes to chose from and was an amazing price .

These lights are easy to install, they stuck onto my 55" tele really well & they are nice and bright. The only fault is that 1 of the 4 strips does not work in the same way as the other 3 and when I set them to Green, that 1 strip glows Red. Apart from that, all other colours work well. These lights are good value for money and it's very handy having the remote rather than downloading an app to my phone.

Arrived in 24 hours with prime. Packaged well and small enough to fit through a letterbox if you're out. For others information initially the four LED strips are joined together in one roll but they seperate easily. I started by plugging in the USB cable to the TV which has an AC/DC cable at the other end then attached the main LED strip which is where the AC/DC pin attaches into then placed the final three LED strips around the TV. For informative purposes my TV is 49" and the LED strips were adequate size wise. I cannot confirm for other sizes perhaps other reviews can help with that. Strips are nice and thin on a white backing strip. Adhesion so far seems fine. However from past experience the heating up of the rear of the TV can cause the adhesive to become less effective but for now, day one no issues. LED's are nice and bright absolutely no complaints there. The glow coming from them reflected on the wall behind is very soothing and not overwhelming. The remote is nice one of the nicer ones I have and I have quite a collection gathering now. It's very responsive and works well. None of the available functions aren't working or responding. It should be noted that brightness control only works when you have picked one static colour and it works well. Brightness cannot be increased or decreased when on smooth, fade, strobe or flash unfortunately. This is a far better set than the previous set I bought which developed not one but two faults eights months into use and are now fit for the bin as neither the seller or Amazon are willing to enforce the one year guarantee offered with them and this is why I purchased this set. I wish I'd purchased these in the first place everything about them is much better. I appreciate it's just day one but I'm happy and hopeful. I certainly give my seal of approval and I'm a very fussy consumer.

I looked at several of these on Amazon. This one was much cheaper than some but thought I would have a punt and get this. Arrived next day on Prime and installed the same day. It comes with a dinky remote with lots of coloured buttons, all of which are easily read and understood. You can change the colours with the remote quite easily. You have to position part of it just slightly hanging out from under the TV to get a good signal for the remote. Colours are remembered when you switch the TV back on. I bought the 2 metre one for a 47 inch TV and it's a perfect fit, top and sides. You would need a longer one if you want to do the bottom too. I thought my wife woud think it was tacky but she says it does seem to make a difference. On my TV which is a bout 10 years old it has a visible bezzle so the only downside is that it makes the bezel stand out more. I love this kit, it seems good quality, comes with connectors for going round corners and lots of sticky pads to stick it all onto the TV. All in all, I've given it 5 stars which is rare for me. I can't find any fault with it. A great purchase. Fitted to the TV in literally 5 minutes. I first thought that it didn't switch off when you switch the TV off so I used the remote to switch it off but later realised that it obviously uses up the residual power in it for about 30 seconds after turning the TV off, and then switches off.

I love this product. It works perfectly, power being supplied from the USB on the rear of the TV. Comes on with the TV and goes off with it if you leave it on via the remote. Colours are great but depending on your wall colour will depend which you choose. I tend to pick one and leave it alone. Take some time to get it fitted equally over the back and sides. If you don't, the light will produce patches and not look great. Two things with regards to the remote sensor. Firstly, placing it so it's not under tension with the power cable is required. Just get it so it naturally sits flat on the rear of the TV. If not, the adhesive let's go after a few hours on this part, the rest remains fine though. If you set it so it sits flat, it stays stuck. Secondly, you don't have to have the sensor showing below the TV. I tested this before I fitted it. I thought it would look naff with that showing but I need not have worried, it works fine with the remote. The colour is not adaptive. You set a colour and it says that colour. It does not change with the TV picture like some standard features of some TVs. I know it may be obvious but just to confirm that.

Firstly, the product itself works well. The strips stick well to the TV, the colours and brightness are adequate (beware though that as with many LEDs of this type, the "white" is more a shade of blue). Handy remote control. I've given this three stars because the strips are not as long as the images lead you to believe. We used these on a 46" TV, and according to the diagrams should have been able to comfortably cover the perimeter. In reality, we had to situate the side strips some distance away from the edge of the TV in order to connect all of them together. The connecting cables or the strips should be longer. The connecting cables are flat, which makes them difficult to curve and make the connection between the strips. This means they "pop out" and cast a shadow when the lights are on. Not a disaster, but not very well considered.

My main telly is a 55" Sony 4K UHD HDR etc. etc. I recently bought a 42" Philips model which has "Ambilight" for the conservatory and I really like it. After checking out various options I chose this 2m LED TV Backlight USB Bias Lighting with 16 Colors and 4 Dynamic Mode for 40 to 60 Inch HDTV to fit on my Sony TV. The kit arrived quickly in a surprisingly small box. The kit comprises four LED strips, which were connected together in the box and so have to be separated, the remote sensor is attached to the end of one strip, three connecting ribbon cables, four spacing brackets, USB cable and easy to follow instructions with a useful troubleshooting section. After cleaning the surface at the rear of the TV and deciding where to fit the spacing brackets for the LED strips I went ahead and fitted the strips themselves, making sure all the direction arrows were pointing in the same direction. I did have to lift one strip at the top of the TV to reposition it slightly and the adhesive backing is showing no signs of coming unstuck. I then connected the small remote sensor to a spare USB port on the TV and switched on. The remote control works perfectly even though the remote sensor is out of sight on the rear of the TV. One thing I did find though was that one of the strips was showing a different colour to the other three. I checked the troubleshooting guide and realised I had reversed the polarity of one of the strips. This was easily rectified by disconnecting the strip, turning the plug on the ribbon cable over, reconnecting it and Bingo! All working. My TV is on a stand and sits about 18" from the wall, which is white in colour. The LEDs, even on their lowest setting still cast a pleasant hue. I prefer the 'smooth' dynamic setting which cycles through all available colours. This kit does not have the facility to follow the colours of the picture or the beat of music like the Philips Ambilight does. Such aftermarket kits are available which use a camera mounted on the TV, to monitor the colours on the screen and adjusts the LED's accordingly. I didn't want or need that level of funcionality. I love the simplicity of this kit and the pleasing results it gives. For less than a tenner, I think this is a no brainer upgrade.