SMARTSTANDARD 28 Inch Hairpin Table Legs, 3 Steel Rods 1/2 Inch Pipe Diameter, 800lbs Load Capacity, Mid-Century Style for Coffee Table, Side Table, Night Stand (Black, 4PCS)

Very nice quality. Strong and able to support quite a bit of weight. Using on a berber carpet and is quite stable. Very attractive choice.

I bought some Bush Business Series Peninsula desks a few years ago to make my own "L-shaped" setup with 6 foot desks. If you know how well built those desks are and how heavy they are, as well as sturdy, then you know the layout of them and how heavy the desktop is. They weigh 110lbs fully assembled. In the pics you'll see how the base is on these desks from the factory and understand why I was a little concerned. But, what I did was literally mount each leg with the corner of the part that gets screwed into the desk with the outer portion of the original leg stands. My monitors (five of them) on the center mount (Mount-It Triple Monitor Stand w/ gas/spring retention arms) weighs around 75-85 pounds. The weight of the desktop without it's base is still around 50-60 pounds. Add on peripherals that sit on the desk as well maybe another 10 pounds and that's when I was like, "I hope the desktop doesn't cave in, in the center. Well it's been since October 2024 (today is the 10th of Jan 2025) and I've had zero issues. No worries about the desk flipping backwards with the weight. Weight distribution seems to be on point. Legs were all the right size, but these legs are 1 inch shorter than the original, so I'm one inch shorter than before. Keep that in mind if you're installing these as a replacement of upgrade to a desk that's 30 inches off the floor (measured to the actual desk underside). I may convert the other desk too. The reduced weight which was noticeable when moving the desk back into position made it well worth it alone. The now leg room I have stopped an issue with bad veins in sports damaged knees that was causing severe swelling in my feet and lower legs. So these could help with that particular health issue because you can stretch those legs out for regular, unabated, movement.

Love the metal look. Added these legs to a handmade kitchen table and they are the perfect touch of industrial for our taste. They are table height and so stable. No wobble or leans. The three bar hairpin looks elegant and yet industrial at the same time such a timeless last for years product. The thickness of the bars is nice and yet not bulky. So easy to use comes with the needed hardware we did upgrade to longer screws as it's an everyday use table, but no doubts the provided screws would have worked fine for those who choose to use them. Great table legs I'd recommend and purchase again.

These are heavy-duty legs, impeccably manufactured. You can see in my close-up that the product photos do not exaggerate, those welds really are that clean. Even the black finish is perfect. The screws are good quality, and long enough to mount the legs onto your project solidly. I did have to use some shorter screws to attach the mounting plate’s “inner” holes, because I was screwing into a fairly thin board. The legs are spaced a little close to allow good access with most power drills, so a power screwdriver would come in handy, if you have one. The one minor gripe I would have, is the feet don’t snap on securely, which is only a problem if you move your table. Bottom line, a solid five stars.

Perfect for what I needed. I wanted to up grade the legs on an old farm style table. Well made and sturdy, easy to install (4 screws each leg). Very sturdy. Be sure to measure and double check and measure the height + the thickness of the table top to the height of the chairs you want to use.

Bought these to turn a hevea (rubberwood) butcher block into a desk/sewing table. I was originally going to order legs from another merchant--the products themselves were identical in price, but the other merchant wanted over $40 for shipping, versus getting these well rated table legs from Amazon with free shipping. These arrived super quickly, and were well packaged to ensure the legs didn't rub or scratch one another in transit. The product box itself (not the outer Amazon box) had a hole torn in it, but nothing was damaged or missing. The legs are pretty much exactly what they say they are. Solid, sturdy, and robust. Paint was mostly okay--one had a small ding in the paint (exposing the metal underneath) in a spot no one is going to see it, and another had a couple of very small rough bumps in the paint (put that one on the side of the table that's against a wall so no one will see/notice it). All in all though, they're a pretty good deal. The only real complaint I have is the screws. They're just garbage. First one I went to put in (after pre-drilling holes with a 1/8" bit) had the head snap off before it was even screwed in far enough to snug up to the mounting bracket of the leg. Fortunately, each leg has 5 holes, so I tossed the cheap screws that came with the legs, got some good quality ones (Hillman PowerPro 1-1/4" screws, which were what I should have started with, but they didn't match the color of the legs) out of my workshop, and things went nice and smooth after that. Are they worth the purchase? I'd say so. Just don't use the cheap screws that come with them.

Turned my parents long and low tv stand/entertainment center into a nice buffet cabinet to have in the dining area. High quality, very strong and sturdy

The legs came in perfect condition and came with all the installation screws (Phillips head +) and feet. We got a nice finish in black and our counter top looks great. Very easy to install with a drill. Worth the price and the 42" height we got fits perfectly with our stools. It feels solid and stable. They are universal and will work on any table or counter you have. I may get more for other projects.

Very nicely detailed... using them again soon

I used these for a 10’ piece of live edge walnut to use as a sofa table. Luckily I read the reviews as I was looking at other cheaper legs and people stated that the cheaper ones were very weak. I am thrilled with these, heavy, super strong and even the screws were good quality. Would definitely buy this brand again.

Legs were used for a small table. A lot more sturdier than was actually required. Great value for the money, all hardware to install the legs was included and installation was easy. The legs look great not cheap.

I had a tiled coffee table top that was missing legs. After storing it in a closet for 12 years I decided to update my living space by using these hairpin legs. I couldn't be happier! They really are heavy duty and very well constructed. The tile table is quiet heavy. It took me about 30 minutes to install with a ratchette screwdriver. Easy breezy! Highly recommend this product.

nice , bought to make a live edge table. looks great.