INSL-X CC550109A-01 Cabinet Coat Enamel, Satin Sheen Paint, White, 128 Fl Oz (Pack of 1)

Needs usually 3 coats, but after you are finally done it is super durable and will not peel or crack. Have used it over poly coated wooden doors, trim, etc. Washable and durable finish if you put on enough coats. Smelly and expensive, but effective.

This has good coverage it did take me about three-four coats on my very old kitchen cabinets but the finish is great. It’s not too thick and application was easy. A whole gallon did my whole kitchen and the vanity in the upstairs bathroom great value for the money.

What can I say... its paint. Good consistency, dries even and quickly. Performs as it should with a smooth finish.

I used this cabinet reconstruction on oak cabinets and here’s what I found: 1-While it recommends 1 to 2 coats of paint, I ended up using 4 coats for the cabinets using a 5” nap roller and a paint brush for the harder to reach corners to not have any see through oak color. 2-The instructions recommend light coats. I tried both light coats and heavy coats and there was no noticeable difference in quality. 3-Sandind was also recommended. While I did sand before applying the paint for the paint to have a rough surface to adhere to, I did not sand after painting each of the 4 coats. There was no difference, in my opinion, in aesthetics. 4-The other instructions such as drying time did apply as recommended. Overall, this cabinet paint met my expectations and looks incredible. It costs so much less through Amazon rather than the big box stores.

I have purchased this product several times and I’m always impressed. I have used it on existing cabinets and with proper sanding this gives you an absolutely brand new looking finish. cures very hard and does an amazing job self leveling. Just remember that if you slide your finger along the project and can feel a bump or ridge then it will show in the finished product. So you need to sand all that smooth. The coverage is great and I have not needed to prime bare wood. I’ve used it over MDF with great results for some custom shelves that I made. I now try to keep a can on hand at all times for little projects around the house.