20-Inch LED Light Bar - 100W CREE LED, 7200 Lumen, Spot Focus Beam, Rugged Off-Road Lighting for Jeeps, Trucks, UTV

Light bar works great, super simple setup just connect to the battery and run the switch through the firewall. very nice thick braided cable, very good quality watertight plug. Personally I added more silicone sealant to make sure the light bar doesn't get moisture in it, none so far. Don't leave the LEDs on with the cover 😅 it will deform the plastic (in images). mounted it with the stock hardware, good options for mounting. Even with how low it sits and aimed level it lights up the road just as much maybe more than my xenon brights. got it mainly to see critters on the sides of the road to avoid.

Nice well made light, this light come with everything need to to install and wire in it has a plastic cover that probably will fly off it don't fit that secure, but my main problem was that I have a switch panel that has the relays and switches built-in so I had to cut the wiring harness for my install, it would be nice if RC would take that into consideration and have it made both ways since most people that buy off road lights have a switch panel, just my 2 cents

Perfect size for Victory 4x4 hidden winch bumper installed on a 2005 Toyota 4runner. Kit came with multiple mounting brackets and nice tinted cover for external mounts. Have not completed wiring and so do not know the brightness. Includes wiring harness.

Installed this on my 2005 Ram 2500 yesterday. I also used the Rough Country front bumper bracket kit. The light bar fits nicely into the empty slot of the front bumper between the tow hooks. While the light bar itself is fairly simple to install on the brackets with the provided hardware, Dodge DID NOT make it easy to remove the tow hooks...Which is necessary in order to place the brackets. This was by far the most challenging and frustrating part of the process. After a couple hours of testing my patience, I was able to get it done without removing the front bumper or any other components. If you have this truck and are looking to do this install, I'd recommend using an impact wrench (and other various sockets, adapters, wrenches, etc.). I don't think I could've done it without one. If there would've been adequate space to get to the nuts and bolts, this would've been a 30 minute - 1 hr job in total. Anyway, after the light was finally in place, the wiring was pretty simple. Just attach the positive and negative wires to your battery. I removed the blank-off cover at the firewall and notched it with a hand saw to allow the switch wires to pass through the fire wall. This little blank-off cover is held in place with two 15mm hex nuts inside the cabin, underneath the steering column. It's actually the pass-thru location for the clutch if you have a 6 speed. There was plenty of cable left over, so I zip tied the excess cable and harness near the battery and fuse box. Now that everything is done, the light is very bright. I like the clean look it adds to my truck. Again, the install would've been much shorter and simple if it weren't for the space issues on my '05 Ram. Nice product.

Mounting was straightforward. I drilled two (2) holes in the bumper and used the mounting hardware that came with the light bar. One issue was that the 20-inch light bar came with the wrong Allen head screws so they did not mount flush which caused an issue with the other mounting hardware. Fortunately I had also purchased a 30-inch RC light bar and I just used the Allen screws from that since I mounted that to my truck using a different set of brackets. Otherwise I would have given this 5 stars. Cabling was a bit more challenging for two reasons: (1) there was plenty (too much, based on where I mounted this on my truck) of wire harness to connect the light bar to the battery, but just barely enough of the wire harness to reach inside the cab through the firewall; (2) I chose after market illuminated rocker switches instead of the basic switch that came with the light bar, so that complicated the wiring (my issue - not an issue with the product). Rough Country support was very helpful in helping me sort through the wiring of the switches. Just installed this (and a 20-inch RC Black Series LED light bar) this weekend and very pleased with the end result. Bought this because it (1) fit behind the grill (2) I like the 3-year RC warranty and (3) the price was very reasonable compared to several other choices. Truck is a 2014 F150 Lariat with 3.5L ecoboost engine.

Nice unit for the price. Fit and finish is nice. Is it as bright as baja designs or rigid.. no. But it's plenty bright and at the price I can't complain.

This is a very nice light bar for the price point. Solid construction and finish looks up to the task of holding up to the weather in the Northeast. Multiple mounting options are included in the package as well as the power harness. Simple easy to understand instructions.My only concern is what appears to be a delicate plastic push button on/off switch. We will see how it holds up. Also switch has a constant red dot that is illuminated even when truck is off if you wire the bar up as instructed.

I would give this product a one star. Maybe it’s not the led bars fault but I bought this used open box off Amazon and finally got around install and guess what it doesn’t work. I have double triple checked everything and nothing.