18-8 Stainless Steel J Hook Battery Hold Down Bolts,8-Inch

Worked great on my 2005 Honda Pilot to replace the rusted J-hooks. Easy to install and appears to be durable. Hopefully this stainless steel lasts longer.

Very nice replacement hold downs. I ordered the 8 inch for my 2001 Honda Odyssey and it fit good.

Stainless steel so won't rust or corrode. They come different lengths so pick what fits best. The hook end goes past 90 degrees so it locks in place better. You get 2 so have a spare. This size worked perfectly on a 2011 Toyota Rav4. Used a threaded knob that was on original rod. Priced that makes buying over making one a no brainer. Fast shipping. Next day.

These work fine, just a lot cheaper than the original ones, but do the job

Nicely

9" was perfect to tie down my RV AGM 6V batteries because they were a little taller than my wet cell 6V batteries.

After replacing my car battery with an shorter-height aftermarket (Odyssey) battery, I found the OEM J-bolts were technically a little overlength. This wouldn't be a problem, except that the OEM J-bolts are only threaded a short length down from the top, so I couldn't run the nuts down far enough to firmly clamp down the battery strap. These aftermarket J-bolts address the problem quite well. They are a bit longer than the OEM bolts, so I cut them down by an inch and cleaned up the cut ends to prevent hood interference.While they do respond to a magnet, they are definitely stainless. I took the leftover scraps from cutting them short and dropped them in a bottle of saltwater to see how they held up. They've been in there for over a week now without even flash rust developing on the cut surface (which I never repassivated). They're probably ferritic stainless steel--a somewhat harder form of stainless steel commonly used in automotive applications. Ferritic stainless steel responds to a magnet but still has excellent corrosion resistance.

I bought the 9" J hook for my Golf Cart lithium battery upgrade. This seller had three different sizes. I ordered the 9" and it was just a little too long. I used a jig saw to cut off almost an inch and then used a grinder to clean up the cut. It worked perfectly. The j hooks come with washers, lock washers, nuts and a plastic cap to go over the end and protect the threads. The thread protector is a nice touch which made the install look professional. I didn't want to have to use a wrench so I replaced the nuts with wing nuts. Very happy with the price the quality and the accessories that come with the rods. It's a complete package.