Flever Dollhouse Miniature DIY House Kit Creative Room with Loft Apartment Scene for Romantic Artwork Gift (Dream Angel)

I make a lot of DIY miniature kits, and Flever is one of my favorite brands. A friend of mine was going through a hard time in RL (super nasty mess), so I made this kit for her as her pink escape place - she loves pink. She adored it. It was fun to build with a lot of adorable details (check out the bunny ear slippers with the pom pom noses). The only thing I did not care for was I could not see you got into the bathroom! All of the components were of very high quality with clear assembly instructions. Flever houses are not introductory level usually, but this one was not that difficult. Sometimes I use double sided tape to stick pieces together rather than glue. In the case of this model, I can see it led to some final gaps in the close-ups. The gaps are not due to any fault of Flever's in their part cutting, I just typically lightly sand the edges of parts and touch up the part with a matching acrylic or ink marker. If I don't get it absolutely flat, I get gaps, so my fault - not Flever's. Speaking of double sided tape, I have found it to be the best thing to put the plexiglass pieces together. It eliminates the chance of glue smear on the glass which is almost impossible to remove. You can get 25m roles of 1.5mm double sided tape on up. I also use it on the back of my paper patters that go on fabric. This ensures the pattern does not slip around and I am able to neatly cut out my part (I recommend one of the fingertip Xacto knives -loops around your index finger, once you use one you will never go back). My glues of choice tend to be: Aleene's Tacky/Turbo Tacky for paper, Gorilla Super Glue for tiny metal to metal parts (the underside of the white hex living room table for example), Beacon and B-700 for everything else.

I was looking into cute bedroom miniature sets and noticed that most of the listings had low reviews claiming that the instructions were unclear and the crafting process too meticulate but I'm just gonna say that all you need to build this set is time, patience, and some prior experience with building miniature props and sets. I have only done 1 complicated miniature food stand (with a lot of tiny bits and pieces) in the past so I did know what I was walking into when buying TRANQUIL LOFT, which is on a much higher scale. I was scared of reviews reporting missing and broken parts in their kits but luckily mine came with everything included. I did get Tranquil Loft though so I cannot speak for the quality of other sets. I think I did receive a faulty music box winder part so I am unable to actually make the music box wind but you know the music box is completely optional I never touch them. The booklet instructions are totally clear and in plain English along with a visual guide. If there is a prop or step you really do not understand just search up the name of your model on Youtube, there are plenty of videos showing the assembly process however I couldn't find any videos that showed the final electric wiring process. I can see how it's inconvenient for people who realize that they will need to get their own additional materials and tools to make this kit. I had to buy Silicone glue with a narrow applicator but I happened to already have other tools on hand like craft glue, wire cutters, thread snips, craft knife. One thing I do have a problem with is that the wiring instructions require you to trim the power wire but with the copper inside exposed and I'm not sure how they expected people to do that with regular scissors?? I fortunately had access to a wire stripper that easily takes out the casing so I can't imagine doing the very important LED power line assembling without it. Double tape was very helpful for sticking paper and wood together. Also used iron on tape and fray check for the fabric pieces. Use an iron for all those 0.5 cm folds. I had a heat gun and heat tube shrink for the exposed connected wires which was just a personal preference, I'm sure the provided electrical tape is fine. A personal tip I have is to save all the tiniest props for last so you don't accidentally lose or damage them in the chaotic assembly process. You are also not obligated to make every single tiny prop included in this kit. There are some I am definitely skipping since I have my own Re-ment and other kinds of 1:12 pieces. Be creative with this miniature set and do whatever makes you comfortable. Sometimes your furniture or walls will not exactly align a perfect 90 degree angle so be careful about that especially when you are using hard to remove glue like silicone glue.

Love miniatures just started my collection in the last few months. My daughter and I are both collecting them to assemble together and construct a town/village in my basement also including LEGOs . It will be a lifelong project for us. Shipping was faster than I thought and pictured on the box so you know what miniature your getting. Has everything inside to construct and should be a blast to assemble. All the little parts are so tiny and cute. Will update when done. Update: all pieces were accounted for and this was a blast, it was my first miniature kit. I’m currently on my 3rd kit now. So addictive, very time consuming, but that’s what I like about them. Plus all the cute little pieces, it’s absolutely amazing and adorable. All pieces are separated in plastic bags which are labeled so you know where to get what pieces. The manual is not in English but you do get a pdf to download, which is a great help, especially if it’s your first build. I don’t glue everything down, for items like the t.v. , bowl of apples on coffee table etc, I use museum wax, so if I want to change things around or just want to add my own personal touch to some of them. This kit did come with the dust cover, I just haven’t put it on yet. Also music box included too. This kit was assembled in 12 days , some days I worked an hour some days I put in 6 or more hours. The pillows on the couch and bed I added my own stitching to in blue and yellow. Just thought I would add my own touches. The possibilities are endless here , so have fun! Home of squirrel brown! Soooooo much fun, l took as long as possible to finish it because I didn’t want to be finished! I love squirrels and have had a squirrel a couple of years ago. So this one is very dear to me. I added a lot of my own touches too. Everything was accounted for and in new condition. The only problem is the battery pack doesn’t work, I’m really disappointed in that aspect. When you pay for something you want all of it to be there and to function as it should. I’m not gonna deduct from my rating due to this , though it would be nice if the company could send me one that actually works. Still very enjoying to look at despite the lights not working!

I absolutely love it! It’s so beautiful. Very detailed and needs dedicated work, but totally worth it.

Claro que me gustó, está hermoso,fue uno más a mi colección

A very fun and challenging build. Lots of details you have to cut out and make yourself. Definitely a kit for more experienced builders. Recommend using heat shrink to connect all of these wires that light up this really cool diorama. Finished product looks amazing and realistic. I would definitely buy another kit from this company. See enclosed photos.

Suchhhhhhh a Beautiful House

Je suis en train de fabriquer ma 5 ième…super produit, bien fait …j’adore!👍🏻👍🏻👍🏻