IMPRESA 4-Pack Vacuum Sealer Foam Gasket - Restores Suction & Sealing - Vacuum Sealer Gaskets for T910-00075 - Compatible with FoodSaver V2200-V3800 Series - Black Rubber

Worked perfect on my food saver after the original foam seals wore out. Price was very reasonable and they showed up fast.

I have a v3485 foodsaver, and it decided to stop sealing after vacuuming . On researching this I realized it was probably the gasket (the vacuum progress light wasn’t lighting up either). The problem is this unit does not have removable gaskets (having green tabs to open the unit seems to be the indicator for this - if they are grey, the gaskets should be removable.). However, it wasn’t working so I thought it worth trying to remove and replace at least the top gasket. So I started to remove the top gasket. Sure enough it’s glued into place but I got most of it out using a sharp knife. Then I used WD40 and a lot of cotton swabs to dissolve the remaining foam and adhesive. It might have been easier to have used a plastic safe glue solvent, but I had the WD40 so… Installed the new gasket. Did not glue it in - I may yet do that but it’s seems to be staying in on its own, and most importantly, it’s now working fine. Vacuum progress light on and everything. I don’t think I will be able to replace the bottom gasket (it’s flush with the surface) but if it stops working again I’ll try prying that out also. It’s a better alternative than simply throwing the entire unit away. Note to people buying any kind of vacuum sealer - make sure the gaskets are removable, these are the parts that fail most frequently. So I didn’t need 4 but I’m sure I will have occasion to use the rest of them over time.

I pulled my vacuum sealer out of storage and it would not pull a vacuum. My sealer was in great shape and looked brand-new, however it just would not pull the vacuum needed to do the job. I went on a search and found these replacement gaskets. Well - All I can say is BRAVO!! They worked perfectly and my vacuum sealer is now working like brand new again.

Direct replacement for worn seals. Fits well.

Fit perfectly. Made my sealer work again. Money saved.

I thought my seal a meal was done for. Then I saw a video that explained what I needed to do to resurrect my unit! The unit was not bad, the seals were! If your unit is not suctioning out the all the air, this might be your problem with an very affordable fix! These seals fit perfect and my unit worked as good as new! I was impressed. I salvaged and returned to my son his unit for the same reason. I reordered a second box because I did not want to be without again!

I had a few Foodsavers over the years. My V2860 model is my favorite. It was still working but it stopped auto-sealing last year. I had to manually hit the seal button which allowed the bag to get back in some air. I had already started looking for this same model online but all I found was pre-owned and looked in worse shape than mine. I read that replacing the gaskets can fix the problem. I figured I had nothing to lose so I ordered them. At first, they did not work, I put a new gasket in the lower part and I thought the upper took a gasket too. The machine would not close right and did not seal. Feeling a bit defeated I thought I would remove the upper gasket I installed and tried again. The FoodSaver made a seal that actually was too hot to touch ( this has not happened since it was brand new). I then placed food into the bag and held my breath. Hit that vacuum button and then I heard the angels sing. Not only did it vacuum but it was a super tight vac and then it sealed on its own after maybe 30 seconds!!!!! You know that real tight seal when you buy a package of bacon? I got the same seal on a steak! It works as if it were brand new, and I am thrilled. If you are having a problem with your Food Saver before you give up and toss it, try changing out the gasket. To be honest, I am still not sure if my model takes only one gasket or two, but it's working fantastic with the one so I am happy.

Ordered these because they said it would work in my FoodSaver. They look good, good material, fit good in the slot. However when going to use the FoodSaver to see if it fixed the vacuum issue. Could not get the bag to go all the way in to trigger the unit to vacuum and seal. After multiple attempts, took the new seal back out and could see that they were too thick. Went to Walmart and bought the actual FoodSaver brand seals. Put both side by side and could see the ones ordered from amazon was just a hair too thick. Put the new FoodSaver seal in the unit and had no issues putting the bags in and activated the vacuum process. The product looks good but it doesn’t work like it’s supposed too. They were so cheap cost wise it’s not worth the trouble to return. Just a lesson learned.

I'll admit, I had my doubts. New gaskets make my FoodSaver work like new again. I honestly thought of replacing my machine but now there's no need. Was an easy take out the old and put in the new.

Produit conforme à l'original. Envoi rapide et soigné

Was ready to ditch my old vac sealer unit (about 8 years old). Just wasn’t pulling a sufficient vacuum. Unit was shutting down, indicating insufficient vacuum. Changing moist/dry setting didn’t help. Then I tried flipping the old gaskets over and saw some improvement. Hence the “ah hah” moment…..time for new gaskets. Been working like a charm ever since. I won’t be waiting as long to use the second set that comes in this package. Highly recommend.

Joints nécessaires au remplacement des anciens pour que la machine fonctionne au mieux - Top.

I was actually thinking of buying a new sealer then I came across these and what a difference the sealer is at least 10 years old and works like it’s brand new with the news seals