oxygen sensor socket 7/8 o2 sensor socket 3/8 Inch Drive 22 mm Offset Oxygen Sensor tool 02 Sensor Removal remover

You definitely need this if you are a DYI person. Quality craftsmanship and it works as advertised

Worked as designed!!!!

This oxygen sensor socket is a great price and is plenty heavy duty for removing oxygen sensors. The 3/8 drive fits well, along with the 7/8 hex. However, the outside body of the socket was too big to fit the metal cup that surrounds the OEM sensor on my 2007 Honda civic. It took me roughly 20 minutes to grind the outside of the socket to fit down into the cup, then it fit perfectly.

Grips well, may take a second hand to keep it on the sensor. Very durable, as my O2 sensor was pretty rusted and we cranked it with a breaker bar to make it budge - this thing held up perfectly

I got this to remove o2 sensors on a 2006 hhr. that particular year the upline sensor comes off the manifold instead of on the cat pipe. It would not fit in the recessed area where the old sensor still resides until i can get the other design socket. I was going to get the similarly priced long socket from HFT but after reading several reviews complaining of it being too weak and coming off the nut on the sensor i went with this beefier design not knowing it wasn't going to be able to fit. So I left the old one in place and put the new sensor on the new cat where it already had a hole on the pipe so not a deal breaker. And it does work just fine when you have room to get it on a O2 sensor. NOTE- second pic showing socket on you might think if it was flipped 180 degrees it would fit, but tried all positions and it's the thickness of the socket that can't get past the very narrow space seen on the lower part of the pics.

Perfect size

Perfect for the job and solid material.

Works well just hard to get it in the correct spot as well as the Ratchet at the same time. But TBH I couldn't of done it without it. Fit perfect but has to be completely set r or it slips . Look, Looks Fantastic, Durability still using!

Worked well to remove O2 sensor for 2005 Corolla.

A must have tool for anyone needing to change their oxygen sensors. Made the job much easier

Very good quality works well

Good product, good price, fast shipping. Don't expect this to pull out old rusty O2 sensors on its own. No socket will. I used some penetrating oil to start, followed by applying heat to the exhaust pipe where the O2 sensor screws into it (using MAP gas), to break the threads free from rust. Once the O2 sensor was moving, I worked it back and forth while reapplying penetrating oil, eventually removing both O2 sensors. The process takes a while, but this tool is key because you can remove the O2 sensors without having to cut their wires. The products works great, and is exactly as advertised.

Va très bien et permet d’accéder à des endroits impossibles sans cet outil