REQUIRED READING FOR PURCHASE:1-We recommend replacing the extractor blade every 5-6 months to obtain the best performance2-The sealing gasket may loosen during transportation. Please stick it close to the blade for best performance before use3-Check the bottom gear. If the gear is loose, tighten it counterclockwise4-Don't run the mixer for more than 4 minutes at a time. Because high-speed rotation will generate a lot of heat, which will not only accelerate the wear of parts but also cause the mixture to scorch due to long-term heating5-Don't add components beyond the "maximum" line to avoid overflow6-Please ensure that the blade is in the correct position and locked. If the mixer starts to leak, please replace it with a new washer7-Please check your mixer regularly. If there is leakage or noise, you need to replace the blade8-We don't claim these are original Nutri ninja. It is only used to prove the compatibility of accessories9-Again, nonstandard use will accelerate the smoothness and deterioration of accessories10-We strive to provide customers with a good purchase experience as much as possible. If you have any questions, please contact usCOMPATIBILITY:The 6 Fins Pro Extractor Blade replacement Assembly for Ninjia blender is compatible with Nutri Ninja Auto IQ Series BL450-70(900W),BL451-70,BL454-70,BL455-70(1000W),BL480-70,BL480W-70,BL481-70,BL482-70,BL483-70,BL484-70 Pls check if the bottom blade of your Ninja blender has 6 fins. Only 6 fins blender blade can be fit for this blade Only fit for 18oz, 24oz, 32 oz cup. NOT fit for 16oz cupNOT COMPATIBLE WITH:NOT compatible with 7 fins Nutri Ninja BL450-30,BL451-30,BL454-30,BL455-30 1000W,BL480-30,BL480W-30,BL481-30,BL482-30,BL483-30,BL484-30Not compatible with 3.35in-6 fins Ninja BL770,BL771,BL772,BL780,BL660,BL740 Review: Efficient - Does a very good job at making sauces and soups Review: Fell apart after just over 2 months - The underside wheel has completely shattered after only a couple of months of occasional use. Very unhappy
S**A
Efficient
Does a very good job at making sauces and soups
A**R
Fell apart after just over 2 months
The underside wheel has completely shattered after only a couple of months of occasional use. Very unhappy
V**E
Very good
Very good
D**N
Great replacement
As good as the original. Great quality
K**R
Works but isn’t a perfect fit
Works but you have to push down quite hard for it to work, I would also advise against putting it in a dishwasher as I’m on my second one
D**S
Kitchen wonder
I like the fact that I didn't have to purchase a brand new Ninja and that the part I wanted was easy to purchase. It works like the previous one. I am so glad it works well. Recommend you purchase one if you are looking for this part for your Ninja
H**N
Started oozing rusty liquid after a couple of weeks
Wouldn't recommend
M**S
Doesn't last long
Brought this replacement blade after the original broke after years of use and this one barely lasted 8 weeks so now on the hunt for another replacement.
D**L
No se si me vino defectuoso, pero el original me duró 5 años y este se rompió de la parte que va hacia abajo (lo que se atora con el motor) al tercer uso. Esperaba más calidad
M**A
I used the product on my ninja blender, it did not blend. Other than that, it leaks. So so so so bad, highly don’t recommend. We’re forced to throw it away and waste our money.
A**R
Terrible quality. I was cheap and bought this replacement after the original went dull. This item is incredibly loud, it's quite shocking. The construction is poorly crafted as water gets trapped in the ball bearings. As a result, a rusty watery goo develops after ever use. The fault is not my own as this item was NEVER submerged in water and was carefully hand washed. The issue is it is not properly sealed. Waste of money and downright dangerous to use.
E**O
Gostaria de ter trocado.
A**Z
BUENA REFACCION PARA LA MEZCLADORA NINJA DE 1000W, AL PRINCIPIO COMPRE UNA Y RESULTO DE SER DE 7 ALETAS Y EMBONE ABIERTO
Trustpilot
5 days ago
1 month ago
