M5 Neoprene Well Nut M5 with 20mm Marine Grade A4 Stainless Steel Pozi Screw (Pack 6) (E)

I ordered these for an entirely different non boating use, attaching a license plate holder to a 2018 Subaru Forester front bumper using the factory holes (which are sized for Japanese or European standards) because the holder's included mounting adapters were terrible. These well nuts just *barely* fit through the holes with a bunch of twisting, and the screws were a little too big for the holes on the holder. Fortunately the holder is plastic and I had a Phillips head screwdriver on hand to ream them out a bit. No more missing front plate! If you're doing the same, you might look for M6 size for easier installation. The well nuts themselves seem to be very good quality, they held up well to me holding them and repeatedly twisting back and forth to squeeze them through too-snug holes. The screws sure look like stainless steel to me and set smoothly into place and snugged down well to hold the license plate holder.

These worked exactly as expected! I have a slightly lifted 4x4 pickup and ever since one of my high school students received a ticket for not having mudflaps I fear that I'm on borrowed time, as I do not have mudflaps on my own pickup. My truck has oversized wheels and tires and I have fender flares that cover the top, but they don't protect anyone behind me from small stones, snow, and water spray. I know that I should have considered all this four years ago when I installed the wheels and tires. OK, back to the mudflaps and these well nuts. My flares are anchored directly to my truck with four to five screws each, but when I move the mudflaps outward to cover the full width of the tire there isn't any metal to fasten to. My solution, questionable as it may be, is to add one more screw mounting the flare to the truck and getting one, or two screws through the flap, flare and into the steel fender. Then I use two, or three of these well nuts to anchor the flap to the flare. I'm not sure how it'll hold up to Utah snow yet in forward, or reverse, but once I tightened up the four mudflap I stood up slapped the bedside of my truck and loudly proclaimed "well that ain't going anywhere". So far these well nuts have exceeded my expectations and were delivered quickly to my small western rural town. #GBR

Good quality, good for kayak handles

With new inserts installed, bars are much less mushy and now quite stiff. This is an upgrade.

Just what I needed to attach the bracket for my front licence plate using the 2larger Canadian plate holes in my Subaru crosstrek.

This is a must have for kayaks. I have beeb able to add so many hooks upgrade my seat ans keep the inner hull dry.

I needed to mount a small plastic box to an interior plastic panel of my Subaru. With these fit the bill perfectly. All I had to do was drill two 10mm holes in the panel, insert the plugs and then mount the box. Easy-peasy and a secure mounting.

Good anchors. Used them in a boat and have held up for a few years now. Would buy again

Posso solamente dire dire che elementi indispensabili per rimontare le carene della motocicletta quando si rovinano o perdono gli originali......!!Soddisfatto del prodotto e tempistica consegna

I haven't used them yet but they look good quality. Thank you falcon workshop supplies for posting the parts out to me so quickly. I will be using falcon supplies again in the future 👍

Écrous M5 conforme à ma demande. Très bon produit . livraison rapide.

Son unos tornillos con buen mecanizado y unas roscas que van muy suaves. Los he comprado para quitar los tornillos de montura de GoPro, que son largos y molestan en el 'mecano/grua' que toca hacer para el montaje en el frontal de un casco de moto. PROS: Bien mecanizados, roscas suaves Sustituyen a los de las monturas de GoPro a la perfección CONS: Para lo que son son caros Resumen: Un poco caros, pero cumplen tan bien que los volvería/volveré a comprar

Todo perfecto...