PHS - French Cleat Hanger Kit - 6 inch Heavy Duty Z Clips (3 Pairs) - Supports 50 lbs - Mirror Hanging Hardware, Picture Mounting Brackets, Wall Mount System for Frames & Cabinets

First time I have used picture frame hanging tools like this and I am pleased. I prefer this to the wire hanging, as you don't have to constantly adjust or hammer in tons of nails in the wall. What I like: 1. Well packaged in a nice box with instructions. Everything pictured in the description is included 2. Nice solid metal cleats with some thickness to it. 3. Very easy to attach to the back of my wood frame. I marked the center of the frame and then the center of the cleat, lined them both up and then attached the cleat to the frame. I only made a tiny hole with my drill in my frame and could easily screw the screws in with a screwdriver to avoid splitting my frame. No need to drive the screws in with a drill. 4. Very easy to level on the wall. I made cut outs of all of my picture frames and hung them on the wall. I marked the center of each frame on the wall and marked the center of the cleat on the cleat. I lined both and then marked the drill marks. Using my level, I made sure the cleat was level as I screwed it to the wall. And very easily hung my picture. It is level! What I don't like Nothing really - I like everything about this system. I do however, I wish it came with a small bubble level. I am using the one on my 12 inch ruler, but a smaller one on the frame would be easier to use. However, it is easy to slide the cleat up or down to level it before screwing it down. And you can unscrew it to readjust if you screw it on slanted, which I accidently did. Using my 12 inch ruler with level on the wall is preferable as it is easier to keep both level.

French cleats are my preferred method for hanging pictures--easy to get your frames level and stay that way, and offers a little wiggle room when centering horizontally on a wall. These cheats are lightweight, easy to install, and good value for the money.

I needed an additional picture hanger for a large picture. the frame was designed to be used with a french cleat; so, I only needed one side (not the pair). This item was easy to install on the wall and seems sturdy enough. I cannot comment on the advertised weight supported, since my picture/frame weigh very little.

Works great, fairly simple to attach, hasn't fallen off yet

This is one of those moments when you smack your forehead and say "Why didn't I think of that before?" I hang a lot of art in my home and I personally have never liked the - pound in a nail and hang a wire on it - solution. Every time I walk by the object, I stop and nudge it slightly to get it level again. Not with these. They are a little more work than just pounding a nail in the wall, but when done, your art will hang very secure and very straight for ever. With these, you even gain the ability to move your art side to side somewhat in case you didn't get it dead center where you wanted it. It still stays lever and secure. You'll need a level to get them properly positioned on your wall and art piece and a little extra time. But if you are tired of walking by and noticing that your art piece is tilted then you should give these a try.

Works perfectly!!!!!

Worked great! I would use this product again!

I have a couple of mirrors with no frames, these provided excellent mounting ability. I cleaned the back of mirrors with 70% alcohol before attaching with loctite brand rtv. The other half I used drywall screws on the wall. I love that when I want to repaint my walls this mirror just lifts off the other half of the bracket, no need for trimming around mirror.

Easily recommend.

These were easy to install and are very strong. I've put them in a plaster wall that had been repaired many times. I've hung something that is very heavy and it was easy to do.

These are great for hanging pictures. Once installed properly the picture is easy to hang and always level. Wish they sold longer ones for larger pictures instead of having to use two and try and level them.