EGO POWER+ 56V Standard Charger - CH2100

As a proud owner of EGO Power+ tools, I recently added the EGO Power+ CH5500 56-Volt Lithium-ion Rapid Charger to my arsenal, and it has proven to be a game-changer in every sense. This charging beast has redefined my expectations for efficiency and convenience. The standout feature of the CH5500 is its lightning-fast charging capability. Whether I'm powering up the 2.5Ah or the robust 7.5Ah EGO batteries, this charger never fails to impress. The term "rapid" is an understatement – it feels like my batteries are rejuvenated in the blink of an eye. This is a game-changer for those busy days when time is of the essence, ensuring that my EGO tools are always ready to tackle the toughest tasks. The build quality is exceptional. The CH5500 exudes durability with its robust construction, making it a reliable companion in any workshop or job site. The LED indicator lights are a thoughtful touch, providing a clear visual cue of the charging progress. This feature, combined with its compact design, makes it easy to monitor and store, taking up minimal space when not in use. Compatibility is another strong suit of the CH5500. It seamlessly accommodates all EGO Power+ batteries, offering versatility for users with multiple tools in their collection. The convenience of a single charger for various tools is a testament to EGO's commitment to user-friendly design. Safety is a top priority, and the CH5500 does not disappoint. The charger incorporates advanced protection mechanisms to safeguard against overcharging and overheating, giving me peace of mind when leaving batteries unattended. While it's an investment, the EGO Power+ CH5500 56-Volt Lithium-ion Rapid Charger is worth every penny for those who value efficiency, reliability, and the longevity of their power tools. If you're serious about getting the most out of your EGO Power+ equipment, this charger is an absolute must-have. It's a shining example of EGO's dedication to providing top-tier solutions for the modern, discerning tool user.

Worked fine, purchased as backup battery.

We had a rapid charger for our EGO lawnmower (great product and quiet - neighbors went and bought one last year too after seeing and hearing ours,) but needed another one to help charge a new EGO snowblower. Too bad they don't make a dual rapid charger for charging 2 at a time. We could only find the dual regular time charger, so ordered another of it too.

These ~$30 Ego Ch2100 slow Chargers have only 1 fan but the $100 warranted version has 2, where the 2nd upper fan pulls air through the battery (cooling it) then out of the charger via a shroud. With only a single fan here, the 90º circuit heat rises into the battery - heating it, shortening its life and negating the advantages of slow charging. A spare fan jack for this (FAN-JACK1) is on the top left corner of the board in the photo. The one OEM fan is decent for its low cost but moves warm air up through the battery. This add-on fan does not void the (nonexistent [3rd party vendor] warranty), but will save hundreds on replacement batteries over the years by slow, cool charging. Almost all batteries degrade due to warmth, both in use and while charging, as well as being stored fully charged for long periods or in hot outbuildings, or being used full to empty. Ideally, lithium batteries would be used only between (roughly) 25%-75% charge and stored at 35-40% in ~60ºF. Violating these precepts can reduce charge cycles from several thousand down to a few hundred. I used the Noctua 40mmx20mm NF-A4 x 20 FLX for this add-on. The pin on the outside of the circuit board is + and the inside pin is -. Therefore the Black and red on the Noctua connector need to be switched. If you know how to do this and have the right tool, do so. If not, cut the cable, trim the sheath and use the thoughtfully included splicers. The yellow wire is irrelevant. In the photo of the top cover you will see a center slot with 4 tabs into which the fan fits perfectly. I used double stick tape on the sides and a dab of epoxy at each corner. See the LED wire at the bottom of the cover? This procedure is MUCH easier if you just slip that wire out of its slot. Remove the board, slip the new fan in oriented to blow inward and reorient 180º the OEM fan to blow outward. Cool air now will enter the battery and the OEM fan - now exhausting, will cool the circuitry better. Attach the connectors, route the cable. Done. Getting the bottom cover on is a little tricky. I found that by just turning it back and forth repeatedly it will eventually just fall into place. The cover's 4 screws have T10 security heads.

This product works as advertised. Good to know I can take this when I travel to use as a backup in our poor electrical infrastructure world.

Original review (7/14/25): This CH3200 charger is higher wattage than the CH2100, which I didn't notice until I received the unit. The LEDs are in a better position in terms of being able to check the charging status. They also are more aesthetically pleasing/modern. It's more low profile than the CH2100, as well. I bought this CH3200 at a list price of $40, but it seems it's selling for $49.99 at the time of writing the review. The CH2100 is currently prices at $55. There's no reaosn to buy that charger. I will eventually open up my CH2100 and see if I can figure out why it broke, and repair it.. and eventually may hand it over to my dad if I can't figure it out. I had purchasd a DSANKE battery because EGO's battery prices are ridiculous, but that battery seemed to have killed my CH2100. The Ruzixt I purchased next works fine on this new charger, as does my OEM EGO battery. It does seem like the CH3200 is a bit louder, but I don't mind. Also, I just noticed this while charging batteries in my office, and usually I have the charger out in the garage. It could be a perception issue due to the location of the charger, but I tend to believe I'm accurate in my estimation that the CH3200 is a bit louder (fan noise) than the CH2100. Will update this review as needed.

I ordered one, but when it arrived, it had a US plug on it. On checking the label, it said 110v 60Hz. No indication of this on the web site. Probably great if that is what you want

Great fast charger for ego lawn mower battery

excelente cargador buena calidad

Great quality Product

Livraison un peu tardive mais fonctionne très bien