npt 1/2 Homebrew Ball Valve kit Stainless Steel weldless Bulkhead for Home Brewing Kettle

I needed this at work to make a water barrel out of an old 200l oil barrel for the jet wash. I drilled a hole in the side of it and used all the sealing washers provided and it works perfect. Brilliant value for money and the build quality is really good

I got this for homebrew. I usually make large batches of Mead a few times a year and using a label or pot to move the brew was a pain. So I decided to add this to my largest cooking pot. If it was good I was also thinking of replacing the old ball valve tap I had on the oak barrel. This is a good bit of kit. It's modular and gives you lots of choice to change later down the line. The weldless bulkhead is great for attaching to pots or odd shaped barrels. Just make sure you have access to the inside to tighten it properly.they include spare silicone seals which is a huge plus and makes life easier. It is stainless steel and easy to clean, it should also resist any rust for a long time. The tap uses a ball valve so no need to worry about rubber degrading. They're also food safe and VERY reliable. So no drips or leaks. The barbed end is a plus as you can attach a hose easily for draining off and because it is modular you could also change to a different fitting. Good quality and value. Highly recommended. Thank you for reading my review. I hope you found it useful

Good quality all in stainless

Worked great. I didn’t love the rubber washers for installing on an igloo cooler because they’re not thick enough and leaked. I put other larger washers on the the leak stopped. The valve itself is great quality and has performed well for several batches of beer. I think this will last for years.

Installed on my deep fryer, takes the temp well, easy install.

Excellent kit with all necessary parts for my Gott cooler. Leaked at first but this was solved by using the supplied Teflon tape on inside as well as outside threads. I used the supplied silicone washers on both inside and outside against the cooler surface.

We bought this for our water pipe. Works great