QTEATAK 2Pcs PCIe NVMe M.2 2280 SSD Heatsinks Cooler & Mounting Screws Screwdriver Kit…

Perfect for laptops!

If you're building PCs with used parts, these are a neccessity. They look good, fit well and are built well and don't strip as long as your not tightening them like a gorilla. Works with Machinist, MSI, Gigabyte and Asus boards. Keeps temperatures down. I didn't use the included rubber bands because they are going to rot and break so I dug into my O-ring kit and used O-rings which will take longer to break down. Nice low profile so if your SSD is under your GPU it will still fit behind it and not hit the GPU.

Works as intended, I do wish the rubber bands are black to match the heatsink.

Perfect for my computer needs

I was short on screws for mounting an M.2 SSD, and ended up with this kit instead of just screws - because a little extra heat sink on recent large SDDs is never a bad idea. The blue heat transfer sticky pad is not that sticky, but it does not need to be due to the bands; and might save you if you apply it wrong. It's not a disaster to take it off and reapply. This kit does not dissipate heat from the back side of the SSD, but that is likely not needed in many cases unless you have an unusual build or possibly a hot console. I used both sets, would order this again.

I have a fairly high-end system. Right above my blistering hot RTX3090 is an equally hot Samsung 970 EVO. If you know anything about the 970 series of drive you know they already get a little toasty. When transferring large files it will hit 75-80c. While technically that is within spec the drive will throttle down heavily. Some users don't understand that with NVME drives there is such a thing as too cold. The storage chips will work better with a little heat in them. One of these cheap little coolers is perfect for the 970 evo dropping it's new top temps to 50-55c. Perfect! Quick and dirty conclusion: Don't waste your money with huge heat blocks, get this.

Has a low-profile heatsink of aluminum, sized for a 2280 M.2 SSD. Plenty of spacers and screws and a great little phillips screwdriver (magnetized) to install those little SSD screws. Has silicone thermal pads to conduct heat to the heatsink. Even has little rubber bands to hold the heatsink to the SSD (even though they all broke when trying to wrap around the assembly). Everything was x2, so I have spares for future SSD's. Good Value for the $

Arrived promptly; all the parts were included. But the spacer and the mounting screws were the wrong size for me, so including the screw sizes would be a help. Fwiw, I was trying to replace missing (and likely, propriety design, odd sized) screws for an SKK external, not a motherboard. Haven't used the parts yet, but I intend to save them for later. Nothing wrong with the kit, just not for my unit.