TAURI 6 Pack Screen Protector for Apple Watch Series 9/8/7 45mm & Series 6/5/4 SE 44mm, Bubble-Free, HD Clear, Easy Installation, Ultra-thin Flexible TPU Protective Film for iWatch 45mm/44mm

You might be wondering why bother with a pack of six? I would argue that it can take a few goes to get right. Plus, certain things aren’t well documented. The mounting stickers are indeed overly strong, and if your watchstrap isn’t a loop, you don’t really need to remove the watchstrap. My tip here is to re-used the mounting stickers, as they become less sticky and more manageable as you reuse them. What I did learn from fitting is the usual, ensure the watch is super clean, super lint free, and that you place the protector correctly. What I didn’t realise is that, removing the layers in sequence can be a bit tricky, I ruined one by not realising I hadn’t separated the pieces correctly; when I removed the last layer (4) I accidentally removed and threw the whole thing away. Doh. Equally, avoid over folding when removing layers 2 and 3 otherwise it’ll take a while for any crease to become invisible. Finally, small bubbles. If when squeezing out the air you end up with a very small bubble, ignore it (after removing layer 4) – I kid you not, in about three days it will have vanished. And this brings me to my final point, it takes about three days to fully adhere. Don’t sleep wearing your watch for a few nights, otherwise it may try to come off. Happened to me, woke up with a HUGE bubble under the protector. If you skip a couple of nights wearing your watch it will bond and then be fine. This IS a good screen protector, but you need a little care putting it on, and you may need a couple of tries before you fully understand what you’re doing. My top-top tip is leave it with any accidental bubbles you can’t remove for a few days and let the protector settle in, it will be invisible and not lift after that time too. If instead you are tempted to lift and try to reseat the protector, you’ll probably warp it, and it’ll never be right again - chuck it in the bin, and use one of the spares you still have. I also discovered that there are two main protector types, a wet-type and a dry-type. This one is dry. There aren’t any different between brands; I’m pretty sure they come out of the same factory as they look identical, including the labelling on the protectors and the sequence to apply them. So, definitely buy a six pack, periodically you’ll need to change it. Learn from my mistakes. But equally, buy the cheapest one you can find, because they’re all the same (assuming you get the right size for your watch). If you do it right, one protector will last many months if not years ... but then again, that's the catch, you need to apply it right. That took me nearly the entire pack, but its been on for months now and is just fine. Scuffing a protector just means a new protector. Scuffing the Apple Watch and you have to live with the mark. I did this a couple of times with my old one, so now I've invested a small amount in my own idiocy. I think that's worth the money.

This is the second time I have bought this product and it is great. Easy to apply to your watch (watch the video it helps) and the protective cover is invisible and works perfectly. It needs to be changed every few months but it is well worth the money and time to apply to the watch. I have bought a different brand in error and this was useless, I won’t make that mistake again!

UPDATE February 2024: I managed to find a video for a similar product and saw how to correctly install the protector on my watch. It’s since lasted for 2 weeks so far without peeling and looks perfect. The seller contacted me and offered a refund, which I really appreciate, but won’t take now. All I’ll say is please put the correct link to the installation video! It’s actually a really good product but obviously doesn’t work properly if not correctly installed. Original review: I bought this product because I wanted an Apple watch screen protector that would protect against scratches and knocks; the Apple watch is not like a normal watch because you touch it so much through the day. I didn’t want anything bulky and the good thing about this product is that it does protect the watch from scratches without being bulky. It doesn’t affect the touch screen features of the watch, and is easy to remove. However, as other reviews have said, the instructions that you scan the QR code for are completely wrong. I had to work out how to apply the screen protector, and it does bubble if you get it wrong. Good job you get 6 covers! The covers seem to react to heat, too. The first one started to peel at one corner after about 3w of use in the English winter, so I presume body heat gets to it on the end (English winter = thermal base layers). However, like I said, you do have 6 covers. The product is okay, but I’ll probably look for another brand when shopping for watch screen protectors again.

Very impressed with this product. Firstly, DO WATCH THE INSTRUCTION VIDEO at least 2-3 times BEFORE starting the process - it really does help clarify some of the later stages when you have to remove the various protective backings. (it would have been nice to have a QR code link to this on the supplied card rather than having to type out a URL). I wasted my first attempt after only watching the video through once - do pay close attention to how the film comes off in Step 10 onwards , once you understand this the install is a breeze. Another reviewer here mentioned they had 6 of the sticky foam watch holders but my box only had one and it was not the same that shown in the video. Also, it was only slightly sticky on one side, the other side had no protective film as described in the video and was not sticky at all. This did not stop me installing the protector but I did have to take extra care when initially positioning the protector to prevent the watch from moving. Also, the supplied squidger was bent out of shape so I used a credit card as an alternative (more protective packaging would be a good thing as the box was bent out of shape quite badly on delivery.) Once installed it really is invisible, you have to run your finger over the edge of the watch to feel it is there. Touch sensitivity is perfect, for me there is no difference in operating my watch with this protector in place. I will see how it performs over the coming weeks but based on how the product is working so far I would recommend this. Well worth the price - and installation effort ;)

The items in this set are really good. The ring fix for the watch to be secured to a table is a good idea, as is the squeegee device to smooth out the air bubbles. The screen protector itself is also nice - not bulky and it isn’t really obvious that it’s there once it’s fixed onto the watch face. The only negative thing in my experience is that it’s quite fiddly to get on. Lifting tab one is fine. Tabs 2 and 3 are very fiddly and I had to restart with a new screen the first time I tried this. Overall, a good product; I just wish it was a little less fiddly.

TAURI 3 Pack Screen Protector for Xiaomi Redmi Note 8T Tempered Glass. Great kit that also includes, dust remover stickers, clean / dry wipes. These screen protectors work and fit the Redmi Note 8T fine, no issues. Covers the screen leaving a small margin around the edges due to the screens slight curve (most screen protectors do this to prevent bubbles) not sure why one review said it doesn't fit fully and their picture shows the screen protector finishing near the "Redmi" logo? (Could be a different model phone, not applied correctly, or even a lack of quality control on the product) however the ones I've received fit perfect. *Pictures added to show this (cover is slightly off center to the notch, this isnt a design or width issue, it was just how it was applied when I took the photo. My dad wouldn't know / be bothered but I was so I did realign it after) Remember the Redmi comes in different models, this is for a Redmi Note 8T. I bought this and applied it on my dad's phone, no problems whatsoever. There is no notification light on the Redmi Note 8T so you don't need to worry about aligning that up. Start from the camera notch and everything will line up correctly. Avoid buying any screen protector with the black borders, I found out myself that they are very hard to align and sometimes can actually narrow the display view. So to sum up, If you own a Redmi Note 8T and are looking for a screen protector(s) then these will do the job just fine.

I have tried a couple of other screen protectors which claim to be 'easy to install' and 'bubble free' previously without very good results. Based on this I gave up on screen protectors and opted for a case with a screen protector included instead. This provided good protect but added significant bulk and reduced the touch sensitivity of the screen. I decided to give a screen protector one more try and chose these based on the product reviews and I'm really glad I did. There is a good instructional video on how to install these. I found them easy to install and bubble free. There was a very small bubble when I first installed it but it disappear overnight. Once installed it is more or less invisible and doesn't seem to effect the touch sensitivity.

I bought a new Apple Watch (my first ever) and within a month I’d accidentally scraped my watch on a wood flooring which left behind a scuff mark. Really frustrating how easily a watch that expensive can scuff like that but it is what it is. Anyway I bought these in the hope that it may hide the scuff mark. The first issue was that the video link they give you to show you how to fit it doesn’t even work on their site. I found a video on their site for fitting a cover to a mobile and it’s a similar idea in principal so I managed to work it out. Anyway in terms of hiding the scuff mark it did the job perfectly. Unfortunately no matter how careful you are you get bubbles, marks and imperfections on your screen. Basically I’ve fixed one mark on my screen just to replace it with another one. There are 6 in the pack so you do at least get a few attempts and it is good at hiding scuff marks but the application itself is pretty poor just as poor as apple watch’s scratch resistant screens. Great idea in principle but frustrating application process and constant imperfections make this a one star I’m afraid.