Dynastus 22 oz. Professional Composite HVLP Air Spray Gun Detail Paint Sprayer, 2.0mm Nozzle, with Air Regulator Kits

I was a little off put by the plastic-ness of this gun but after using it I’m very happy with the results I’m getting. Better than any gun I could find locally. Easy to dial in. Sprayed metal flakes nice and even. Clear coats come out great too. Worth buying again and I just might

I have used this sprayer so much, easy to adjust the pressure, spray size and volume. The pressure gouge comes in handy to make sure you aren't pushing to much air through. Clean up is a breeze, as is disassembly.

i like it!!! great finish and small fast to clean up . great for small projects or touch up

I used this to apply some DuraCoat (a two-part metal surface coating treatment) on some relatively small items (max 4"x 20" - in other words, I wasn't trying to spray a vehicle or refrigerator or something very large). This spray gun performed extremely well for my needs, running on a relatively small portable air compressor. The spray gun runs at low enough pressure that the compressor power up very infrequently, which meant that air flow was very even - a big help getting even coverage. It also cleaned up very easily. I'd rate this an excellent performer for small jobs, and an outstanding value.

I've gotten as far as blowing solvent through it (initial cleaning), so this isn't exactly the most thorough review, but I do have so feedback so far.. Spray.. seems to throw an even pattern. Regulator.. I expected precision control over air pressure. Instead found that the regulator is very imprecise. To go from the 30lb to 40lb range you probably want to be in.. that corresponds to maybe 30 degrees.. that's the distance an hour-arm on a clock moves in one hour. Interestingly, it seems like pressure outside of that range moves with more precision (.. it requres more travel on the knob to move x lbs.). it seems like the range i care about is the most sensitive. And.. the big one.. Quality/Reliability. When I went to tighten the included regulator.. I didn't make any attempt to hold the nipple on the spray gun in place (my bad..) but it led me to a discovery.. The handle appears to be a glass-composite (fiberglass reinforced ABS?). the air connection on the gun is threaded into the reinforced plastic handle.. there isn't a metal insert in it.. the air line threads directly into the plastic/resin handle. When I tightened the regulator into the nipple (which is connected into the handle), the connector in the handle slipped. When I inspected, it looked like the metal high-pressure air connector had been cross-threaded into the handle and the manufacture realized this and put some sort of glue in to pass this defective model off. The gun is cheap though, so I just cleaned out the threads, put some 5-min epoxy on them.. and rethreaded the nipple into the handle. I'm hoping it'll hold. It's a cheap sprayer though so if it doesn't.. oh well. I need a sprayer now and it's working and it was cheap. Overall.. Quality.. not as good as it first appears. Performance.. so far, seems to work surprisingly well. This isn't a high-quality sprayer. But,.. I think it works well (after some setup work) considering the cost. EDIT: Since original review, I sprayed a guitar body with Dupli-Color auto primer. It laid down the thin primer smooth and evenly with no dripping issues. Sprayer does a good job at aerosolizing the paint. The repair to the compressed air nipple (epoxy on handle threads) held up fine. The glow-in-dark pink I intended to spray as the top-coat turned out to be far grittier than I expected so I didn't try to spray it. I haven't run paint through it yet but I expect it will handle it well given the performance with the primer.

I bought 3 of these. I sprayed flake, base, and clear throught them today 062121 to test. 1. If using mini pps cups, you need # 21 adapter. 2. The fan adjustment knob screw will need red locktite. 3. Something I havent seen in other guns... the needle adjustment spring has a plunger, so the spring cant grab the knob and slowly rotate it as you work the trigger(nice!) 4. Nice and light weight. 5. Sprays HyperSilver nice, even with the 1.0 needle, due too the fine pressure and volume adjustment. 6. I did not use the included regulators, I spray most wheels at 35psi, and run a inline drier. Something, I will mention... I got a hot spot on my hand, and found the sprayer body, has a casting line. A quick scuff with some 180grit took off the raised edge and felt much better. I paint for a living. These spray just as nice as the Sata minijet. (Super surprised!) We will see how they last in full commercial use.

I must say this spray gun performs like it cost twice as much money. That said, it was not without a couple of issues. I put the air gauge on attached an air line to it, the fit wasn’t the best so l wrapped a bit of thread tape on the fitting and tightened it down. It still has a slight air leak from the air gauge stem itself but not enough to worry about. I made a couple of adjustments with air flow, spray pattern and the trigger pull and I have ran sanding sealer and enough conversion varnish to spray 2 large slab wood tables and a large wood slab table base so far and the gun sprays very well. I use spray guns all the time for finishing furniture and this gun sprays like a champ at 20lbs of pressure at the full open spray - perfect.

I purchased the sprayer to aid in painting skulls for European mounts. The sprayer is easy to use and paints well. You can not use a thinner with the base primer or metal paint, so I had to take the filter out. Paint and primer would not pass through the filter easily. No problems once the filter was removed. Easy to clean up.

Buen producto funciona, el Cuerpo es de plástico