Mitutoyo 530-312CAL Vernier High-Accuracy Caliper with Calibration, Inch/Metric, Stainless Steel, 0-6" (0-150mm) Range, 0.02mm and 0.001" Graduations, -0.0015" (0.03mm) Accuracy, 40mm Jaw Depth

Before buying this I bought a £17 digital calliper from Sealey which was so inaccurate (it drifted by as much as 40mm) and so poorly made that I sent it straight back for a refund and looked for an analogue calliper instead. Mitutoyo are a brand I know as I've encountered their large-scale industrial measurement instruments at work so I trusted them to make good quality kit. Having said that, I also trusted the Sealey brand too. This Mitutoyo calliper is almost 3 times the price of the Sealey digital one and it doesn't have the added cost of the digital readout so I'd expect it to be a lot better, but the truth is the two products are a world apart. This is a simple, well-made, robust, precision tool that allows you to accurately measure to within 0.02mm. None of this could be said for the digital calliper that I tried first. You could say this is simply a case of 'you get what you pay for'. But it's also the fact that it's easy to be lured by things like the ease and simplicity of a digital readout, but it's a false benefit. The simplicity and ease of use of this analogue calliper easily matches a digital one and it's far more accurate and not prone to error (at least only to human error). Thoroughly recommended, though if you're not old enough to remember slide rules, you'll need to read the instructions (which are very simple by the way).

The BEST quality, the BEST price, the BEST seller. Threple B = High STANDARDS. Thank you so much

Extremely well made and easy to use. Not a heavy duty item and perhaps less robust than the digital type - but it does not need batteries and you can see that it is reading correctly.

It might seem expensive at first, but if you care enough to need calipers in the first place, you might as well have precise and accurate ones. People don't realize that a cheap unreliable pair of calipers is just about as good as a tape measure... And yes, much of it is the brand name, but the difference is that Mitutoyo, Moore & Write, and Starret all have something to loose by producing inaccurate imprecise instruments..., Everything. Cheaper brands can afford to have people just not buy their instruments because it won't stop people from buying their other tools like screwdrivers; companies like Mitutoyo don't have anything else, if people don't buy their instruments, they don't make money full stop. Overall, sold pair of vernier calipers, perfect if you don't wanna think about batteries and stuff.

This caliper is at the top of its game, buy quality buy once. Easy to read and well made. If you're buying a caliper that you think you will use a couple of times a week, don't mess about and just go for it!

Very nice instrument of good precision and high quality for a modern day of cutting costs. Definitely not a counterfeit, although I agree with some points of TurtleFoot's review. This model doesn't have fine adjustment screw. Well, it's not as good as a German tool from 1930s, but still quite nice instrument in my opinion.

I chose a Mitutoyo product based on their reputation and on other reviews and I am not disappointed. Looks and feels like a quality tool, a pleasure to use. I have the eyesight typical of a sixty something, but have no problem reading the Vernier (with glasses!). My only criticism is the plastic storage wallet supplied: It really isn't going to protect it, I am looking for an alternative. I bought it primarily for use at home in my amateur radio / electronics workshop. It appears to be a genuine Mitutoyo product, if it isn't, its a very good fake!

Works very well, no batteries to go flat, accurate, very well made.

Il calibro Mitutoyo è sempre una garanzia di qualità. Arrivato puntuale e non danneggiato dal trasporto è il prodotto atteso.

Buscaba este calibre por la preferencia casi unánime de los profesionales hacia esta marca. Está muy bien diseñado. Viene con un perfecto ajuste y acabado. Está lubricado lo justo (con un aceite ligero). Es de acero inoxidable pulido. Para quien no esté habituado, incluye instrucciones para comprender el sistema nonius. Las escalas son muy legibles. Una de ellas está en pulgadas, si bien está claramente orientado al sistema métrico. Los profesionales comentan que los números resisten bien la agresión de los diversos productos químicos habituales en metalurgia. Es un placer trabajar con este calibre. Vale un dinero bien gastado. La diferencia con los baratos es más que notable. Sólo se podría mejorar entregándolo en una caja de madera, en lugar de la funda de plástico en la que viene. Comparado con mis otros calibres, los deja a todos en ridículo, con la excepción de un Draper de dial, que casi mantiene el tipo. Veremos con los años.

Best and Genuine product.

nice build quality will last a lifetime if taken care

This caliper is quite well-built. At $80 it isn't cheap, but I have to admit that given its quality construction, accuracy, and overall appearance, the price is acceptable to me. Of course, one could argue that the only thing this tool needs to do is to provide an accurate measurement (which it does), but the truth is that there is also value in the smooth metal surfaces and impeccable movement and construction of this instrument. So yes, you possibly do pay more for things that aren't necessarily connected with the precision measurement ability of this caliper, but at the same time, I am OK with that as long as I perceive an adequate value in return. Meanwhile, because of the fact that this caliper is so nice, you kind of feel that it is not the best choice for a machine shop or garage or similar work environment where it is in fact needed and used, because of all the grease, oil, solvents, and similar material that exist in these environments which will definitely adversely impact all those pretty metal polishes! But for use in an engineering design office, architectural firm, laboratory, or other similar settings which are less subject to sticky and harmful materials, I believe it will be quite suitable. Some reviewers had complained about the deficiencies and inaccuracies they had observed in the product. All that I can say is that it is quite possible that the quality of this item across the board may be subject to deviation from its best norm, and unfortunately that does happen. Of course, if it happens too frequently (for a product that is supposed to be of high quality), that is a problem. But based on the caliper I received, everything seemed to be in good shape. And finally, a word to the manufacturer: is it really so impossible to provide a reasonably decent case to go with this caliper? It is true, it is already fairly expensive, but I don't think anyone is going to object if you charge an additional $5 for a case to protect this caliper. I actually had to go out and search all over to get a half decent case to protect this expensive tool.