Dash Cam Mount for Rove R2-4K,R2-4K Pro, R2-4K Dual, Falcon F170,Z-Edge,Old Shark,YI,Kdlinks X1,VANTRUE and Most Dash Camera and Car Camera

I'm very happy with this so far! My Rove camera kept falling from the windshield using their suction cup; it just couldn't take the Texas heat in the summer. I wasn't sure if I would like having this sit further from the windshield, but the picture is just fine. I'm using this in a Jeep Wranger JL and it mounts fine to the mirror. The only thing I would change is I wish they would include shorter mounting screws. I plan on getting a smaller set and using locking nuts instead of the wingnuts. It's very sturdy and a good price.

Worked great for my Galphi M2 dash cam. It had the perfect adapter where it allows me to mount the camera off my rear view mirror.

When it arrived, I was confused because it came with so many attachments with the main piece; however, I had to utilize the attachment from the camera I purchased this item for (APEMAN dashcam). Aside from that, it is likely you could find your camera attachment here, or, if you purchase a different set-up, you have extras with this unit. The attachment is easy to install and works wonders. It comes with a silicone strip to protect the rear view mirror 'stem' where you install the equipment too. The camera I originally purchased had that window suction cup, but it came off after a couple of hours (hence, this purchase). Overnight, the camera is in place and during driving, provided good stability. The APEMAN camera sits just below the rear view mirror, and doesn't hinder me from adjusting that mirror. I think that you would be satisfied with this purchase.

I purchased this for use with my Vantrue N2 Pro dash cam. Directly behind my car's rear view mirror is a fairly large case housing connected to the windshield which houses various sensors. Unfortunately the plastic case is large enough that it creates a blind spot in the camera's view when the dash cam is mounted directly on my windshield. If I wanted to keep the dash cam on my windshield, I would've had to place it very low which would have looked tacky and would have been a constant distraction in my line of sight while driving. This rear view mirror mount is G-R-E-A-T and you get a lot for the price. It comes with many different mounting connectors to accommodate dash cams of various types. The set that I received has a connector that fits my N2 Pro tightly without coming into contact with the charging pins on the dash cam itself. However, there are a couple areas that I feel could use improvement: 1. The connector that works with the Vantrue N2 Pro connects tightly to the dash cam, which is great for making sure that the dash cam stays secure while mounted. But it does make for a bit of a hassle when you need to disconnect the dash cam from the mount. 2. The mirror mount has two adjustable ball joints (which is great), however there is only one screw that lets you adjust the tightness of movement for both ball joints. It would be nice if each ball joint had it's own form of adjustment so that you could lock one in place but still be able to set the second joint at a different level of resistance. Overall, I'm VERY happy with this mount as it helped to keep my windshield uncluttered.

I have a dash cam in each of our four cars; all but one came with a suction cup mount and if you're looking at this item and reading these reviews, you know they suck...er, stop sucking. This kit has a variety of adapters that should work with most cams. There's even an adapter for a GoPro mount or other small camera. I'm using this on two different models of cams. One just needed the correct included adapter, but the other required part of the cam's existing windshield mount, along with the included U bracket adapter. Although it can get awkward trying to work with the mirror's arm, installation is fairly easy and the instructions are written well. The ball joints allow you to position the cam more or less where you want/need it. Just make sure you fully tighten everything after it's in place. I haven't gone off-road or driven on extremely bad roads, but so far they haven't shifted and don't seem to move any more than the original mounts did. The kit comes with the assorted pieces and instructions in a sealed plastic bag. I ordered three kits and although I didn't need it, one package was missing the small U bracket. So that's one star off for quality control - someone else might have needed it. Also, make sure this will work in your car. That is to say, that your car's rearview mirror actually has an arm to attach it to. I ordered in haste without looking and my Hyundai Sonata's mirror doesn't have the standard arm mount. I was able to rig it up and it's holding okay so far, but wouldn't recommend this unless you're positive your car has some kind of arm this can fit around. Otherwise it's a nice solution and would definitely recommend it to replace those destined-to-fail suction mounts. ***Update*** After using these for almost a year, I have to come back and take away a star. The joints tend to loosen after a short while and you need to periodically re-tighten them. Which honestly hasn't been that big of a deal...until today when one of the plastic screw grips broke off. It's still functional as I can tighten the nut it was holding, but now I need to use pliers, etc. It still works well enough, and still better than suction cups, but I'm also expecting the same thing to happen in my other two vehicles.

Nice car mount to save you from driving crazy when your camera falls because of the heat, it came pre-mounted, so it was very easy to install.

Ordered this product to mount my dash camera from the mirror of my 2010 Silverado. It was auper easy to install and tightened the bracket down finger tight (no tools). The camera seemed to bounce/shake a little from the mirror. I didn’t have this problem with the original mount of the dash camera. After a few days the clamp part around the mirror stem broke making this product absolutely useless and a waste of money and time. This product is a great idea, but make from cheap parts. I definitely would not recommend this product.

Thanks to the provided rubber strips, it fits my BMW e60 in tilted condition. Now, my dash cam is secured and not falling down after sun heat on the windshield. Recommended & thanks!!

These products very useful to what i need for. Seller is good to and speed delivery!

Pretty awesome, I don't know why I never thought of getting one of these before. I've had a dash for over a year now and the suction cup recently gave up. Cleaned it with rubbing alcohol and it started to stick to the glass properly again, however I stumbled across this one day and knew that this would be a much better option than using a suction cup or adhesive. Reasons not not to use the suction cup: They lose suction after awhile. Reason not to use glue strips: they leave nasty adhesive on your windshield which may be hard to remove. This mount kit provides a good amount of adjustability and accessibility to your dashcam. there are multiple connections to connect to all different types of dashcams. The only issue i had was the fact that you really have to get up and close to your mirror to connect everything, so if you have a tightly spaced car you might have a little trouble, the job could be done a lot quicker with two people.

Bad

Never have to bother about suction or tape anymore