Loctite Tite Foam Big Gaps Spray Foam Sealant, 12 fl oz Can, 1 Pack - Polyurethane Expanding Insulation

This foam works great and it expands in a real significant way, so you don't need to use too much. It's all fairly self explanatory and it works down to 20 degrees, which I thought was shocking. I believe caulk only works down to 40, so it's handy it functions in sub freezing environments. A word of warning. It's exceptionally sticky and it can expand...unpredictably. If you're using it any place that may be overhead, use caution until it's done curing.

Great stuff. Used with copper mesh to prevent pack rats, easy to apply. No harsh fume smell. Great value.

Works well and gives plenty of coverage. It expands more than you expect, so it’s better to fill a bit less than you think because it keeps growing before it sets. Mine has already cured and I’ll be using an oscillating tool to cut it clean. The only drawback is that you have to keep the can upside down, which can be awkward depending on what you’re trying to fill. Overall, a reliable option for sealing bigger gaps.

I picked up this 2 pack of Loctite Tite Foam Big Gaps, and it worked pretty much like it said. The poly foam stuff blows up nice and fills in the big cracks and spaces around pipes, windows, and even in the framing. After it dries, it feels really hard and solid, makes a good seal, and keeps air out. Using it was pretty easy – the nozzle gives decent control and the foam grows enough that you don't gotta spray too much. Clean up was ok, but you def need gloves or it sticks on your hands badly. When it's dry you can cut it or even paint it if you want, which helps it look better. Only thing, it grows ALOT, more than I thot, so don't fill it all the way up or it overflows. All in all, it's good foam at a fair price. The 2 pack is handy if u got bigger jobs or just wanna keep an extra can. I’d definitely recommend it for anyone doing fixes around the house. The colore was yellow and bascially had no smell

It's my go to for quick plugging of holes. Great stuff.

i thought this would work well for one of my projects, it in fact did not. but that was my problem. this foam i was actually quite impressed with. the cell density is high and boy does it expand in volume. i tested a little piece directly in the arizona sun to test their UV claims and after a few months its still good and pliable.

No matter how much times I get this, it goes bad mid-spray.

My used RV had the bathroom floor rotated out by water damage . I used several different foams to fill underneath the subfloor . This product filled up the space below the subfloor and “ fixed, supported “ the floor and made a great repair .

It’s a very good product for filling gaps. The foam settles down as some type of thermocol after drying. It can be used for split AC pipes holes in place of white cement. Also for gaps in windows and doors for keeping the insects out. But use the product carefully, as it expands after few minutes. You might end up wasting some of it while trying to fill the entire gap/hole with the foam. It’s better to put small quantity of foam in the gap/hole and let it expand. Then use it again if required. Be very very careful while using it. Use gloves. And Avoid it sticking to anywhere on the body, specially hairs on the head, facial hairs, hands and legs. It’s very difficult to remove after, might have to cut hairs too. And it's good if you use the entire Can in one go. Saving it for later is little difficult, as the nozzle and its discharge pipe gets clogged.

Foam is denser than Lepage or great stuff. Fixed a creaking vinyl bath tub installation.

Cuidado, es un producto que puede no funcionar y luego para buscar el reembolso/sustitución es un una pesadilla tratar con el proveedor y con Amazon

I have a window that has a small gap. Mosquitoes would come in from there. Got this produce to fill that gap. Never have I used anything code to something like this. So I was a complete noob. If you are one, this might help you what to expect. The product does what it says. You point and spray, after some time the foam hardens. I would suggest to plan ahead. This thing comes like a shaving foam but STICKS. The first time I used it I had no Idea what i was doing and just showed pointing the gap. It EXPANDS. In matter of minutes it was a mess. So spray ONLY of the nozzle fits the gap! Another thing I did was, spray the thing on waste paper or something and let it harden. This it could cut and mould into whatever shape I wanted and filled it in smaller gaps. Other things to keep in mind. This thing is STICKY. DONT LET IT TOUCH YOUR SKIN OR SURFACES YOU DONT WANT IT ON. (From experience). Its not like you can't get it off but it is just too much work. The spray is not continuous. You need to get used to it.

The product PU is good but the dispensor has problem. I fixed the gun with the delivery tube on the dispensor. It is annoying to find that PU comes out of the delivery tube but also from the junction between the gun and the dispensor can. That messes up everything. For some reason it builds pressure in the delivery tube. Inspite of the plastic cap screw provided with the dispensor to close the delivery tube, PU oozes a little and appears to get hardened inside the delivery tube. The item is NON RETURNABLE and messy. It appears the quality of the gun and its sealing with the can have poor quality seal.