ECOTRIC Stubby Front Bumper Compatible With 2007-2024 Jeep Wrangler JK JL Gladiator JT W/Fog Light Housing & D-rings Steel Powder Coated Black

ECOTRIC Front Bumper is indeed an invaluable asset, in fact, it can easily fit a custom setup like mine which is a C-10 wheeler! First it was made for Wranglers and Gladiators but after some minor modifications, it goes on my truck really well. The front bumper is very robust and stiff and can take a lot of abuse on rough terrain and most importantly, very good for the front end protection. The off-road bumper offers a rugged and aggressive look, which perfectly matches my off road setup. Moreover, the built-in winch plate and D-ring mounts are fantastic features that allow for easy recovery scenarios. In addition, it adds beauty but is also very practical as it’s highly resistant to rust and scratches – the powder-coated finish. In terms of fitment and modification, I’d say it was a struggle worth going through. This bumper completes the shape and function of my truck as it ready for the trails and also looks stunning. I would recommend this product to all the customizers out there; for adventurous drivers, this is an amazing product!

This item came in the best packaging ever! Great deal for the money. (I wont know about installation till next week, but great value) OK, so we finally installed it, and it was a bit of a struggle, but I did not have to grind, cut, or anything other than try and manipulate the studs a bit so that all 6 studs would fit. (key is to make a template for the mounting bracket, and then bend the studs so they fit. (I used ratchet with socket on the nut added to the end of the stud. (we are talking micro manipulation, not truly bending the stud, only the mounting service. ) This will work for winching out of the ditch, or in the woods pulling logs, but I would spend the 500 plus if you were thinking of actually wheeling and using a winch to help you out. This is very thin steel, and will not hold if you were stuck in the rubicon, and needed to winch yourself up a big obstacle. This will work for what little I expect to have to winch, but again if you plan on using it often, purchase something that is going to become part of your frame. This unit will not support pulling that much weight with much resistance, but should hold if pulling you out of a ditch somewhere. I still give it a 5 out of 5 for the price. Lights work great.

Good cosmetic quality. Paint, fit, and finish look good. Straightforward installation. Decent amount of finish has held up to normal street & offroad use (appears scratch resistant). While it looks good, the thickness of the metal might not be best for attaching a winch.

You know that saying "You get what you pay for..." Arrived super well packaged, I mean I have purchase countless bumpers from the internet and this may be the best packaged one I have ever gotten. That is where the praise ends. Horrible welds. Blown out holes that were not fixed. The coating poured out of the packaging and all over my floor and chips off when you look at the bumper. The one really concerning item to me is that there is a gap between the front layer of the bumper and the mounting surface of the back side of the bumper, meaning you can easily over tighten the mounting hardware and deform the bumper and any impact would likely destroy the bumper. Would make a great bas for someone wanting to modify the heck out of a bumper.

I'm happy with this bumper, considering the price. It went on pretty easily. We had to hammer one bolt slightly to get it lined up.

First the good: 1. Its Cheap but seems to be durable 2. It looks good and for the money, coming with a Bull bar is pretty good! 3. The fog lights and cree work lights on the front are nice and have plenty of light. Now the bad: 1. You will need to use your existing wiring harness to connect these lights to your Jeep. You will need to snip off the Jeep connectors (only two, Leave the main one that connects to the Jeep itself. It is a larger Gray one on my Jeep) re-strip the wires and connect them to the wires on the new bumper. 2. I have a 2020 Jeep Gladiator and the bolts from this bumper did not match up. They were at least 1/4 inch off. It took me 2 hours of drilling the Steel factory holes on my jeep to get this to fit. After having metal shards all over me and being exhausted, the bolts finally lined up. Also when you drill them out, you will need to make sure they are level. So mark the holes first and then drill to the mark, otherwise the bumper will be uneven. 3. The factory splash guard will not fit the new bumper and considering all of the wires are just exposed, I had to spend another 3 hours figuring out how to put my factory splash guard on using zip ties and the two factory screws. It will hold for a bit, but they REALLY need something to cover the wires on the bottom of the bumper. 4. The Bull Bar is held on with 4 flimsy bolts. I used them for now but I certainly plan on replacing them in the near future. The new Bumper only comes with 6 bolts. The factory bumper has 8. Not sure who made this decision?? Overall you get what you pay for! I can't complain considering this was the cheapest bumper of its kind. In fact if they fixed the bolt alignment issue, provided a bottom to the bumper to cover the wires and tougher bolts for the Bull Bar, I would be singing their praises right now.

just as described

Absolutely beautiful bumper, fits great and was an easy installation took about an hour for everything. Super happy with this product and it was delivered two days early.

注文してから3ヶ月ですが届きません。 連絡しても返事はありません。 まぁまぁいい値段なので、返金して欲しいです。

Good for the price. There were marks through the finish from moving in the carton. Also where the fairhead for the winch attaches was bent a bit. Can straighten it. Need some better packing.There was rust dust on the hoop and in the plastic bag it was in. Coming from the holes for coating. Hopefully doesn't cause an issue. Haven't installed yet so not sure about fit.

I guess you get what you pay for. It looks good new however be warned, winter roads have rusted the whole front. This is under the textured paint. I assume cheap quality steel that was not prepped properly.

Decent metal bumper, good but not perfect. I wont repeat other reviews but did a few extra steps to minimize issues: - Before install, Sprayed front and back bumper with Hercules bedliner. To protect against rust. - Slightly enlarged frame mounting holes to make install easier. - Added 3rd party connectors to fog lights socket. - reinstalled bottom factory protector/skid plate to keep aero dynamics and protect against stones. Had to trim edges to match new bumper, and used factory bottom mount clips with zip ties at top to affix to new bumper. Holds strong so far. - added silicone plate backing to protector bumper from any license plate flapping. Looks okay and will monitor over time.

Great looking bumper. Well package and shipped very fast. Looking forward to installing next week. Good value for the money. The welds are not perfect but still looks great.