Wixey Digital Angle Gauge | Digital Angle Finder for Table Saw & Miter Saw (Magnetic) – Precision Bevel & Compound Angle Measuring Tool for Woodworking with Backlight

Got this to check angle on saw blades. I thought it would be more magnetic than it is. Doesn’t hang on to blades so have to hold it (yeah blades could be weakly magnetized but whatever the reason). Easy to use and seems to be accurate. Zero it to one surface and measure the surface of interest. Very simple and a lot easier than using carpenter square (and this can be used for any angle, not just 90 and 45). A nice way to confirm what you think you’ve done. Good purchase if angle precision is important

I bought this product, because I have a really old table saw and it just has hash marks on the side to tell you your angle. There was no way I was trusting those hash marks. It turns our I was right not to, after using this device. The table was close, but I would have cut incorrect angles if I used those marks to set my angle. This device worked well, though. I cranked my blade out to get enough surface area without resting the edge on the teeth. That would have given an incorrect angle. Like I said, my table saw is old and wobbly, but that wasn't a big deal. I just let it find it's own low spot and zeroed the table to there. Then I put the device on the blade. They recommend setting the blade to 90deg off of the table saw, then putting it on the blade and zeroing it out again. I didn't do that. I just subtracted my 15deg bevel from 90deg. The reason is because my table saw wobbles when I'm adjusting it. By leaving it zeroed to the table, I could put the device on the blade, adjust it, then let it find it's center of balance, check that the table was still at zero(taring it if not) then returning it to the blade to make sure it was still 75deg, which is what I was shooting for. All of that sounds complicated, but it's not. This simple device allowed me to make my desired cut with rickety equipment, which is about all I have. Anyone who's cut with such tools knows what I'm talking about. It allowed me to easily make a cut that would have been almost impossible otherwise. This product is ideal for table saws and compound miter saws, but to be honest, I think you could even use it for a circular saw or jigsaw if you used the method above. The important thing is that during your final check, when you zero the base, you don't shift it when moving it from the base to the blade. This product is well worth the money, though.

My husband purchased the Wixey Digital Angle Gauge Type 2 with Magnetic Base and Backlight, and it has quickly become an essential tool in his woodworking arsenal. This device offers a combination of precision, convenience, and user-friendly features that elevate its utility. 1. Accuracy: The Wixey Digital Angle Gauge provides incredibly accurate angle measurements. Whether my husband is working on miter cuts, bevels, or setting up the table saw, he can trust the readings to be spot-on. 2. Magnetic Base: The built-in magnetic base is a game-changer. It securely attaches to the metal surfaces of our tools, allowing for hands-free operation. This is especially handy when setting up saw blades or jointer fences. 3. Backlight: The backlight feature is a real standout. It ensures readability in various lighting conditions, even in dimly lit workshops. No need to squint or use external lighting sources. 4. User-Friendly: The digital display is easy to read, and the controls are straightforward. Calibration is a breeze, and the auto-shutoff function preserves battery life. 5. Versatility: This angle gauge can be used in a variety of applications, from setting angles on power tools to checking the squareness of assemblies. It's a versatile tool that suits both professional woodworkers and hobbyists. 6. Build Quality: The Wixey Type 2 is built to last, and it feels durable in hand. It can withstand the demands of a busy workshop. In summary, the Wixey Digital Angle Gauge Type 2 with Magnetic Base and Backlight is a must-have for anyone who values precision and efficiency in woodworking or metalworking tasks. Its magnetic base, backlight, and overall ease of use make it an indispensable addition to any toolbox. We highly recommend it for its quality and performance.

The product is a great product to have for those woodworks that travel to the field, and have there tools used a lot to stay precise, and on the money.

I wasn't quite sure about this before ordering as Fakespot doesn't give the reviews a high grade, but the price was right so I went for it. I haven't had an angle gauge before so perhaps I am not the best reviewer but I will give it my best shot. Initial impression Angle gauge did not come with battery. Had to insert a AAA battery in a slot that was easy to open. Feels solid to the touch and buttons with fine. Backlight works as well. Operation Works as described. Turn on, place on your flat surface and press the zero button. That's your reference angle. Then attach to the surface you want to measure. Performance Magnet worked great for attaching to saw blade. Agent is only in the base of the unit. I used it to calibrate my miter saw to 90° and it seemed to perform well for that task. I checked the angle with a square and it seemed accurate. I did not double check the angle using any more advanced method. Resolution was high I was surprised to see the small movements just as I was handling the saw.

This is an easy to use and accurate tool to calibrate and set the angle of the cut on a circular table saw and a miter saw. I love it and wish I had gotten it sooner rather than trying to use T-Squares or other hand tools. One of the better investments I have made in tools to adjust my table and miter saw. It works in the vertices and horizontal positions.

Good product, shipped quickly. The small size works very well for truing up table saw blades to the table. The magnetized base hangs onto the blade. Just zero out the gauge on the table, then hang the gauge on the blade, and dial in exactly the angle you want to cut. Can be any angle, not just 90 or 45 degrees, so if you want to make a pentagon, or hexagon, or octagon (or whatever) sided box, you're covered. The readout is clear, and reads in decimal degrees. I think the accuracy is +/-0.2 degrees, which is fine for woodworking, and better than trying to use a protractor or square. I always find the square approach problematic, since on most saw blades the carbide teeth are wider than the steel part of the blade. This gauge avoids fouling the carbide teeth of the blade, so you get an accurate blade angle reading. Cool tool!

Works great I probably wouldn’t use it to build the Pyramids.