10pcs Upgraded Tiny Whoop JST-PH 2.0 Male and Female Connector Cable for Battery JJRC H36 H67 Blade Inductrix E010 E013
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4Thumbnail 5Thumbnail 6

10pcs Upgraded Tiny Whoop JST-PH 2.0 Male and Female Connector Cable for Battery JJRC H36 H67 Blade Inductrix E010 E013

4.6/5
Product ID: 120087574
Secure Transaction

Details

  • Brand
    elechawk
  • Connector Type
    Jst-ph 2.0
  • Cable Type
    Custom
  • Special Feature
    Upgrade JST-PH
  • Recommended Uses For Product
    powering and
📏80mm length per cable
🔌Upgraded JST-PH 2.0 connector
🧵22AWG soft silicone wire

Description

🔋 Power up your tiny whoop with cables that never quit!

  • FLEXIBLE DURABLE WIRING - 22AWG soft silicone wire bends without breaking, built for high-performance use.
  • PERFECT LENGTH FOR PRECISION - 80mm cables engineered for optimal fit with your tiny whoop drones.
  • SECURE CONNECTION ZERO FAIL - Upgraded JST-PH 2.0 pins lock tight—no more loose links mid-flight.
  • ESSENTIAL UPGRADE FOR HV BATTERIES - Must-have connector cables designed to handle high-voltage battery demands.
  • UNIVERSAL TINY WHOOP COMPATIBILITY - Fits JJRC H36, H67, Blade Inductrix, E010, E013, and KingKong drones effortlessly.

These elechawk 10pcs JST-PH 2.0 male and female connector cables feature upgraded pins for secure connections, 80mm length for perfect drone compatibility, and flexible 22AWG silicone wiring. Designed specifically for tiny whoop drones like JJRC H36/H67, Blade Inductrix, E010/E013, and KingKong, they ensure reliable performance with high-voltage batteries.

Have a Question? See What Others Asked

Can this connector be used for 12 V automotive application?
will this fit the arduino mkr1010 lipo socket?
How long are these pigtails ?
Will these work to replace motor end battery lead for an E-Flite Blade mSR micro-heli?

Reviews

4.6

All from verified purchases

J**T

This is the correct connector for the FM antenna socket on a Sony STR-DH190 stereo receiver.

These are nice connectors, and I expect that they will also find uses in my model work. They mate extremely tightly (pliers may be necessary to disconnect), which is a good thing in their usual application, and at least acceptable in most applications. The pigtail wires have very soft insulation, strippable with a fingernail, but ordinary soldering does not melt or scorch the insulation.They are the correct connectors for the FM antenna socket the Sony stereo receiver mentioned in the title. The one weakness in that receiver is that the FM antenna connection is nonstandard, making it difficult to connect anything other than the length of wire that comes with the receiver. A bag of these connectors, and possibly a standard TV/FM antenna balun, will allow you to connect the antenna of your choice.This is the correct connector, as of June/July 2024. Assuming 75 Ohm coax from your antenna, simply solder the pigtail leads to the 300 Ohm end of a TV antenna balun (polarity does not matter), insulating with tape or heatshrink, or tape, and you can plug your antenna in directly. Or if your antenna lead is 300 Ohm twin-lead, solder it directly to the twin-lead.

M**R

Good quality adapter

Good quality adapters.

C**S

I use these for a battery on my Meshtastic device

My Meshtastic device needed a different size battery connector than most batteries came with so I bought this kit. The quality in value for money was great. I will use them for many future projects.

M**

Check the Polarity of your Device

Caution - if you are ordering these for connecting to a RAK Wisblock, the polarity of these cables is opposite of your board. I was able to pull the pins and swap the colors around, but it took a LOT of patience and a tiny screwdriver to get it done.

P**R

They’re fine

I used 2 males and a female to create a Y connection for my pos Keychron K2A1 keyboard whose charge circuit died. I routed one of the males out of the case through a hole I drilled so I can connect a cheap lipo charger. Works a charm.Pay attention to polarity, Keychron uses reversed polarity.

R**.

Work great for my application.

I use these to make guitar wiring mods easier. They work great and are easy to work with.

S**E

Dashcam is now repairable!

I got these because my dashcam's tired old battery gave up. The lack of battery power led to my footage getting corrupted whenever I turned my car off, so I decided to open it up to see what battery I needed. Unfortunately, the original battery was soldered to the motherboard, so I took the old battery off and put one of these connectors on so I could connect a new battery anytime a new one gives up. This made my repair possible! I almost needed my dashcam the other day too; nearly got in a wreck because someone blew a stop sign.

C**N

As described

Item is as described. Average quality.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Meera L.

Smooth transaction and product arrived in perfect condition.

3 weeks ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving over 300 million shoppers across more than 200 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
2506 som

Duties & taxes incl.

Kyrgyzstanstore
1
Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

10pcs Upgraded Tiny Whoop Jst Ph 2 0 Male Female | Desertcart Kyrgyzstan