Arofa Kitchen Faucet with Pull Down Sprayer, Brushed Nickel Kitchen Sink Faucet 1-3 Hole Single Handle High Arc Stainless Steel Commercial Modern Kitchen Faucets for RV/Laundry/Outdoor/Bathroom Sink

Great faucet at a great price! Very nice looking and works great. So easy to install.

Great faucet. Easy to install. Good quality. Great faucet. Easy to install. Looks nice work great. Love the sprayer

First let me say don't be scared off by the brand name. Arofa. I have never heard of it. Delta, yes, Moen, yes, Pfister, yes! But I also didn't pay those prices and still felt like I purchased a quality faucet. And this faucet was a breeze to install and was designed with well thought out features. The instructions are illustrated and easy to follow and it gives you the option of using the deck under the faucet or not installing it for a post style look. The collar which holds the faucet to the counter from below is substantial and easy to tighten by hand. No tools required. The only tools you do need are to connect the supply lines to your inputs. Everything else is connected at the faucet already so there is minimal assembly required. The sprayer has a long line so reaching every corner of our large sink was effortless and the weight attached to the hose under the sink was more than adequate to retract the line. It also comes with a 5 year warranty which is better than the 4 year offered by Amazon for $9.99. I really don't have any complaints about this product but here are a couple items of interest. 1. The hot and cold are marked on the lever handle hub. If you mount the faucet so that the handle is on the right, hot is forward and cold is back. This can be easily remedied by switching the supply connections and the cold would be to the front which seems more intuitive. Also the markings on the handle are very subtle on the end of the hub so it would not be noticeable if the lines were switched. We mounted ours on the left and all was good. If you wish to mount it so the lever is to the back, make sure you have enough space. Even though this is not what we considered, I did notice that had I wanted to mount it to the back, the handle would have come in contact with the window trim. This will vary depending on your own circumstances. 2. We had a PUR water filter on our previous faucet. Unless PUR has an adapter that I am not aware of, it could not be attached to this faucet. Besides, who would want a bulky water filter hanging from their beautiful new faucet. Add to that, I think the added weight would keep the sprayer head pulled out of the neck and that wouldn't be good. I can put the money I save buying this faucet and put it toward another water filter option. I tend to look at the negative reviews on an item before I buy because I want to know what it is people did not like about it. I did notice that there are very few negative reviews on this product. I can now add mine to that list.

Trying out this lower cost off brand kitchen faucet. Was really easy to install if you have decent space under the sink. My old faucet took longer to remove. This kitchen faucet looks stylish and I like that it has the lead free pipes. The only thing I am worried about is the durability of the head where the buttons are. I did apply some ceramic coating on the entire faucet but not sure if that will help with durability. Durability as in preventing the head from paint peeling. Also, I switch the hot line with the cold line because i mounted the handle facing the right. I like that when I pull the handle forward is cold instead of hot. So forward for cold and back for Hot. Overall, great working unit for the price. Easy installation ,works great and no leaks.

I've installed two of these Chinese faucets so far, sold under different names. They are very easy to install, are minimalist and attractive, well designed and made, and function quite well. Great value for money. Watch for sales.

Good faucet, easy install. Just wish it were a little less sensitive. It's either dribble or blast. Mostly blast.

On short notice we had to replace our old faucet, which developed a leak. Settled on this as for its good looks and moderate cost. Installation was quite simple. The twist-on plastic collar was relatively easy to get threaded in the confined space behind our deep farm-style sink. We opted to use the deck plate and are glad we did. The side lever is marked for hot toward the front of the sink, cold toward the rear. That’s the opposite of our old faucet, so we opted to swap the hookups to mimic what we had. No one will notice the new faucet’s markings are reversed from how the water flows. The hose sprayer is quite robust. Very pleased there. Watch sizing. This is a medium-sized faucet. It is a tad smaller than what it replaced, but we knew this. Very pleased so far. 5 stars.

We chose the brushed finish which looks great with a standard steel sink. The sink is old, but still looks shiny and we decided to upgrade the faucet as getting a new sink would be a whole counter top with a new style sink project which we are deferring for now. The faucet is made in China, and appears to be well made with quality materials. The packaging was excellent so there were no scratches or blemishes on our faucet. Installation is easy, but in our case some old pipes needed to be cut which I decided to have a plumber handle. My guess is a newer home (mine was built in 1974) installation might be just a screw up the new faucet to some existing hardware. I would not need a plumber to replace this new fixture at some future time. Also, if we do get a new sink someday this faucet will go on the new sink. After about a month's use everything cleans up nicely and it looks great. The action of the water lever is smooth and feels solid making control the water flow and temperature easy. The incorporated sprayer is great. It pulls out of the faucet easily, doesn't shoot water all over, and recoils back to the faucet with authority. I have seen these faucet sprayers in other people's homes that seemed to be hanging out and that's not the case with this one. I didn't see any "parts" list in the installation instructions. I'm not sure if you could buy a replacement cartridge for this one if it started to leak. I think it is well made and the manufacturer has a 5 year full replacement policy so I'm not worried. One tip, originally we had the control lever on the right side. This meant you pull the lever toward you to get hot water and push the back towards the wall for cold. After a couple of days I loosened the main bold securing the faucet and rotated it to put the lever on the left side. Now you push the lever back for hot and pull towards you for cold. You could rotate it less and have the lever face you and then left would get hot water and right would get cold. If you install the faucet yourself you can move it yourself if you want. If you have the faucet installed for you, then tell the installer where you prefer to have the control lever positioned.