Outdoor Wood Furnace Solenoid (2000 and newer)

I have a Central Boiler 3200 Furnace, circa 2011, this part fits perfectly and Works!The elbow it fits on tends to work itself loose from the internal furnace pipe, and falls forward into the utility door.I recently connect a steel support bracket under the elbow, to hold it in place.It runs horizontal and connects at each side of the box. The elbow WILL NOT be dropping forward again!

Seems as good as stock, was a relatively easy install, everything lined up and I was done in about 15 minutes, has been working fine for a week now.Note, if your Central Boiler, is suffering from random boil overs from the intake door not closing, this is likely the cause. My boiler was turning into a steam engine every couple of days, with the last event boiling off 5 inches of water in the middle of the night. If this is happening, this needs to be fixed as soon as possible.Central Boiler 6068

Due to item description and photo not matching I contacted seller to verify which solenoid I would receive. They assured me I would receive the exact solenoid PICTURED. As you can see from the photo I did not. Solenoid on left is original, and the solenoid on the right is what I received. Appears what I received may work. Since I purchased this one as a back-up, will probably be some time before I know for sure.

Direct replacement for my Central Boiler, easy install, working great! Will purchase another as a spare, to insure I’ve got a backup for our heating season.

Worked Perfectly for my Central Boiler Unit. Make sure to mount it with the correct stroke or if damper sticks shut it will burn out.

Perfect fit on my 2011 CL6048 central boiler. No adjustment necessary after removing the factory original.

While it worked and solved the problem, the solenoid is not as pictured. The connectors are not at the bottom side by side as pictured but one on the top and one on the bottom.

Fir nice