ATG Heavy Duty Universal Pistol Dovetailed Rear Sight Pusher Tool

I needed a rear sight adjustment tool after installing a compensator on my P365. All my shots were impacting left of where I was aiming (with perfect fundamentals). This tool worked very well for my P365, although I needed to put in some force to move the rear sights.

Wonderful sight pusher. I wish I had found this earlier. It’s affordable and does the job. I used a block of wood and a big hammer (not a framing hammer but a big mallet/Thor looking heavy hammer) to get the rear sights off of my new cz SP-01 tactical. I can’t believe how much force was required to remove the rear sight. Yes, the set screw was removed. Rewind to 2 days ago, my new cz P-01 arrives and I get to work on swapping the sights. Well, my Thor hammer and wood wouldn’t budge the rear sight. I mean, I was smacking it so hard the wood would splinter. But the sight didn’t move at all. I was using a big vice too. I squirted some penetrating fluid (not wd40, that doesn’t do anything) and went to bed. The next morning, I tried again and again, it didn’t move one bit. I was getting worried that I would eventually damage the slide if I continued so I start to look for an affordable sight pusher. So I found and bought this. The sight was off in a minute, no more drama. This pusher is highly adjustable and made short work removing and installing the sights. It was easy and effortless. The pusher is nicely designed and comes with polymer blocks to protect your guns finish. It has a cool turntable that your slide sits on so you can set the proper height. It is a nice anodized blue color with engraved instructions and a nice sight window to check your work. It even has a graduated scale to measure how far you pushed your sight. All knobs are knurled and this tool does NOT feel or look cheap in any way shape or form. As far as tools go, this is rather cool looking. It also comes with a nice nylon zippered case for storage. I can’t comment on other pistols but if you have a new cz p-01 or sp-01 and you want to swap the sights, don’t kid yourself. Do it right and do it safely and get this tool. I think I was lucky with my first gun and if I had found this back then, I would have bought it. It seems kind of pricey to spend on a one time thing but this tool, you can display it on your work desk and people will ask you what it does. You can then tell them it’s a prototype atom smasher and they will believe you. It’s that pretty and interesting looking. You can also make more friends at the range and help other people replace their sights. Ask for a six pack in exchange or have them wash your car or ask for a box of rounds or use it as a nut cracker during the holidays. A giant walnut will easily fit. You can shear the top off with no muss/fuss. Who needs those ugly wooden soldiers when you have this thing. Your mother-in-law will think you’re a genius, when you use it to crush peppercorns for fresh pepper when you have dinner at her house. It can help mask her horrible cooking, the opportunities are endless...I’m going to use this tool as a centerpiece on our kitchen table. It will be a fun and whimsical change from the boring Flowers my wife usually has on display. In all seriousness, It will cost you 25 or 30 dollars at your local gunsmith to get your sights replaced. Then, you need to verify and you may need to adjust your sights, so back to the gunsmith you go. How about when a new sight comes out that you want to try? It will save you time and money eventually paying for itself. It really is a great tool and you won’t be disappointed. Sadly, I did not receive any incentives for this review. I paid full price for this tool. I’m still trying to figure out how that works. The end.

This seems like a pretty solid piece, especially for the money. It actually says "VISM, a division of NCStar" if you're wondering about the brand. Once everything was locked in, it worked fine to remove my rear sight. I'm taking one star off because I couldn't use it to install the Trijicon dovetail mount I got. The mount was too big for the slot, but then I got the mount jammed in during my Plan B (nylon vise jaws+rubber hammer), so I used the side of the pusher to pop it back out. Then I put my rear sight back in and used it with a laser boresight to make some minute adjustments.

Fantastic product. Easy to figure out, instructions and tips are engraved on the frame to help out. Seems like it would fit any slide. Held the slide secure and with a little bit of force, popped the sights right out. Would buy again.

Definite must have for removing and installing rears sights. Works well on small and large frame pistols. Heavy duty construction.

There's a lot of gear snobs in this world. This sight pusher certainly isn't perfect, but it is MORE than adequate to push sights on full-sized square shoulder slides. I even plan to try it on my Bodyguard 2.0! If you have Glocks and came here looking for a decent priced pusher, you found it! This made easy work of installing night sights on my G19 & G17. Not even 10 minutes per gun.

This sight pusher, while undoubtedly well-made and practical, regrettably didn't prove compatible with my specific firearm model (Springfield XDs), and I'd like to provide a more detailed account of my experience: To begin, it's crucial to acknowledge the quality of this sight pusher. It's clear that it's crafted with precision and durability in mind, ensuring it can withstand the rigors of sight adjustments. The inclusion of a convenient carrying case is a thoughtful touch, adding to its overall utility and portability. However, it's worth noting that despite its impressive build and design, this sight pusher wasn't the right fit for my particular firearm. Upon conducting further research, I discovered that my firearm had unique requirements for sight removal that this pusher couldn't accommodate. This realization led me to the conclusion that I needed professional assistance from a gunsmith to safely and accurately remove the sight. In summary, while this sight pusher is undoubtedly a top-notch tool, its compatibility is limited to certain firearm models. In my case, it didn't align with the specific requirements of my firearm. Nonetheless, its quality and the included carrying case make it a solid choice for those whose firearms are compatible with it. If you're considering purchasing one, I would recommend double-checking its compatibility with your firearm model or seeking professional assistance when necessary

This worked as advertised and the quality was good enough that I scavenged the hardware to make a front and rear sight press functional and even to some extent good. It worked well with my 545 suppressor height sights for both removal and installation. Just be aware it's only for rear and the press is recessed back behind the frame so no easy way to transform it into handling both front and rear sights.

Me encantó el material, muy buena calidad. De las mejores herramientas que puedes tener para cambiar o ajustar tus miras.