Prime-Line M 6258 Frameless Shower Door Bottom Seal for 3/8 In. Thick Glass Doors – Stop Shower Leaks and Create a Water Barrier, 36 In., Clear Vinyl (Single Pack)

Fits snug and does the job as long as you measure well and your shower door is level with the floor. This is the second one I've bought and it's not because the first one failed but because my shower door is not perfectly level with the floor and I have to trim the sweeps. I happened to trim a little too much on the first one and the sweep was no longer touching the tile. It still worked fine but not as well as it should and if I don't do something right I'm going to do it again. I'm not sure why one of the pictures of the product shows the sweeps off the tile. If they aren't gently touching and your tiles aren't angled into the shower it will pool up and run outside the door. Putting it on my doors as it came from the package caused it to jam and I had to pull hard to open the door. Once again that's not the products fault. With the new one I measured the distance on both ends of my door and cut the sweeps to match the distance from glass to tile. It's not easy but you need to learn to be handy to problem solve and overcome the annoying things in life. For the people that are getting leaks I'm betting that it's because of one of the following scenarios: 1. The gap under the door is larger than the sweeps. 2. Water is going through the vertical gap between the door and the other glass panels adjacent. 3. Their tiles were installed poorly and water is running out of the shower. 4. They shower like a baby bird in a bird bath and get water all over the door. It's not going to be a 100% water tight seal but that's not what it's supposed to be. It does what it's supposed to do which is keep splashing water from easily seeping and pooling on the outside of the shower door. If you shower like a normal human and your shower head isn't aimed directly at the door you should be good to go and happy with the purchase.

Easy to cut and install. Will buy again

We recently had a frameless shower door installed, and it slipped out of adjustment putting pressure on the original shower seal. In my attempt to work with it I managed to tear the two blades on the bottom, so ordered this one. This is obviously cheaper than the one the glass people installed; three things stood out- the plastic on this seal is not clear and smooth, the plastic is thinner, and it is slightly smaller. The clarity was not a big issue, but the dimensions could be a problem for some: the fit on the glass is fine, but the angle piece is shorter (not a big deal) and the flanges on the bottom are shorter- they may not make a good seal to the bottom surface. Our old one measured 7/16ths, this one is between 5/16ths and 3/8ths. I have a piece of the seal in hand right now, and comparing it to the photo in the description it looks different. See the angle piece in the photo reaches to the level of the bottom of the channel? The product I got stops well short of that. I'd say our old product looked more like the photo than did what we got. For our situation it is working, so I'm satisfied with this. I'm giving it four stars for the fact it's a good value. I do recognize it is a less expensive product of an inferior quality, though.

Installation is a breeze, it fits perfect and there is no water leak it seals well. Great easy replacement for an old yellowing seal

This worked perfectly. Side note: I read some reviews about difficulty in cutting the seal to size. Although a hacksaw does work fine, I also found that these small wire clippers/strippers work great, not only for the soft plastic part but the harder part as well.

This has been my go to Brand/Model of replacement shower door seal since we moved into our house in 2019 that required them. I have replaced them at least once a year when they wear out. They have always been great and worked much better than what was on the shower when we moved in. Just received my most recent order. I’m not sure if the manufacturer has changed, or if they have just changed the design to save money. But this is definitely not the same product. The plastic is brittle making it nearly impossible to cut to size without breaking some pieces off. The actual door sweep on the bottom is stiff and a fraction of the length of the one that I took off. This makes it useless as a shower door seal. Just ordered a different brand. Hopefully it will be like the old Prime-Line. Be forewarned. If you have ordered these in the past, you’re not going to get the same quality product that you’ve gotten before.

Fits my 3/8 inch glass door perfectly! I tried two other before this: one was too big, one was too small. This was perfect! Slid on with some effort but it has a nice tight seal.

Shower door sweeps are one of the most common items that I replace for my clients. If you have a glass shower door, you can bet that the sweep will start failing at about the two-year mark. When this happens, water will start leaking out on your floor, this is frustrating and, in some cases, can cause damage to the sub floor. These seals are easy to install, all you need is a sharp razor blade, some glass cleaner and a little time (maybe 10 minutes). Make sure to measure the thickness of the door so you can order the correct size needed (unless you have some off brand, budget grade door that the builder installed because they wanted to save a penny or two, see the "heading title"). The old sweep should slip off the door, downwards. It may take a little force because of calcium build up but will come off. Using the "new" sharp razor, BE CAREFUL, and shave the calcium debris off the door, then clean the glass so the new seal will slip into place. Make sure to install the sweep with the water diverter facing into the shower enclosure. The seal should fit snugly, and it may take a little force to get it place. Start from the hinge side of the door and work towards the outside edge. Once installed, you can use the razor blade to trim the seal to length, and you're done.

Installed it on bottom of glass door and now provides a very good seal at bottom of glass shower door. No water leakages any more. Great quality product! Would buy again!!

Fit my shower door like it should. And hasn't cracked in a couple of years

Product tore under normal use after just 3 weeks of use. Have contacted the company for a replacement unit, awaiting a response. Will update my review to share an update once they respond.

This bottom door seal worked perfectly for me. I cut it to length and slid it onto the bottom of the door and it provides an excellent seal. Perfect!

Se coloca fácilmente y se ajusta de manera exacta en el cristal de la puerta y además impide eficazmente que el agua se filtre y salga el agua. Excelente producto !!!