NIERBO Large Projector Screen 180 Inch of Thick Canvas Material 16:9 Projection Movies Screen Outdoor Projection Screen for Church School Home Indoor 1.6 Gain Not Include Mount

This is a good price for a 200 inch screen at less than $100. Screen is canvas but very white. The wrinkles weren’t a problem for me after I stretched it out over the frame. The grommets are good quality for attaching the screen to a frame. One negative is the loss of brightness due to the amount of light that penetrates the fabric. My projector is powerful enough to overcome this but may require a more powerful projector than other screens. It seems that pvc frames are most popular but I used ¾” emt conduit. It’s plenty strong, light weight, and easy to use. Get 7 10’ lengths plus fittings. I ordered fittings from makerpipe.com. The drawing shows the dimensions and fittings I used. The 3 vertical poles are used full length. Cut the 4 remaining pieces to equal lengths to make the upper and lower cross pieces about 185”. I had to cut each piece again to get to the proper length. The final length was 88 ¾” each but this will depend on the dimensions of the fittings you use. Use a conduit cutter for smooth and easy cuts. When attaching the lower cross piece to the poles, use fittings that allow the pole to pass through without cutting so the cross piece can be raised or lowered to match the screen attachment method you use. To make attaching the screen quick and easy I attached a Velcro strip to each screen grommet. Cut a short slit in one end of the strip with scissors, and thread the strip through the grommet and then through the slit. No more threading bungee cords through grommets each time. Attach one of the left-over pieces of emt to the end of each pole using a “T”. Stand the frame up and rotate the feet out to support it. Be sure to attach strings to the top of each end of the fame for additional support. It doesn’t take much of a breeze to blow it over. I noticed that the center pole was visible during use due to the amount of light it reflected so I sprayed it with flat black paint, which fixed the problem. I'm very happy with the combination screen and frame. I leave the frame assembled and leaning against our camper so set-up is a breeze. I figure if it takes more than 30 minutes to set it up we wouldn't use it as much as we do.

A fantastic screen for movie night! Recently purchased NIERBO 200 Inch Large Huge Projector Screen for our movie night on our house. Screen came packaged very well, in its own zipper-carry case. Easy to unpack, and spread out. Comes with detailed care and usage instructions as well. Very quality material, canvas was thicker than other screen I have seen. Double-stitched border with metal eyelets was strong and sturdy. The screen itself was very bright, and definitely had a little bit of reflection to it, which made the screen images pop out. The material was thick enough to prevent any bleed through from behind during projection at night. Did not iron or steam out the wrinkles, however after attaching the screen to the frame and pulling it taught, most of the wrinkles disappeared, and the ones that remained did not affect picture quality at all. Built a frame for it that attached directly to the front of the house. (see images) Used 7/8" strut for the frame body, 1/4" strut-nuts with hooks on them to attach bungees to the eyelets. Points of attachment were behind the shutters so no visible holes in the siding. Came out great!

Got this for a backyard home theater and works great. Arrived on time, in new condition and no issues with packaging. Constructed a portable frame out of 2" PVC and used a combination of 6" and 9" ball bungees for hanging. It's quite stretchy (like a polyester workout shirt) so you have to find the right amount of tension. Too much and it begins to get out of shape, too little and it will sag due to the weight. But with a reasonable amount of tension there are no visible creases or fold lines and holds it's shape well. The grommets are all consistently spaced and seem reasonably solid. While substantial its not too heavy and the 2" PVC and easily support it. We have only had it for a month and have taken it up and put it away a half dozen times so far with no issue. Screen quality is good with no visible blemishes or stains. Can't comment on how it does after being washed as there hasn't been a need for that to date. It does not have a solid or reflective backing so it does need to be reasonably dark to see the picture and backlight will come through. Keep in mind that this thing is BIG! Put up and take down is best with two people and will require a ladder. One could do it, but it wouldn't be fun. Of course, big was the whole point! Overall great purchase for the money, highly recommended and would buy again.

This screen is nearly perfect. It's a great size for projector viewing, and comes with very few creases out of the box. The creases it does come with are very easy to get out by carefully ironing on a low temperature setting if desired. My favorite feature of this screen is the durability and construction of the border. It comes with several "eye-holes" that allow for securing to whatever frame you decide to use. The reason I didn't give this screen 5 stars is because it came with a small brown stain near the middle. It also has an area where the fabric seemed to be slightly pulled apart in places, giving it an non-uniform look. These small defects didn't bother me enough to send it back as defective, and I'm sure these same issues aren't on every screen this company sells. Just be open to the possibility that there may be some minor defects. Otherwise, I'm very happy with the screen.

Great product. Thick.

You will never be able to remove the wrinkles, I still have them 6 months later

The material was a great surface for the projected image and performed great with either front or rear projector location with a 4000 lumen projector on a 250 inch screen on a dark moonless night. The screen was well made from quality materials. I thought the grommets might have been a bit too far apart but this wasn't the case. I couldn't be happier with the result and would not hesitate to recommend a Nierbo screen over a cheaper brand.

A must have for the projector.

Very good quality. I used a clothes steamer to get most the wrinkles out. Amazing picture quality even with it not being completely dark outside. Even better image when it’s dark and the stars are out. I am going to get a lot of use out of this.