DAYBETTER Led Strip Lights Smart with App Control Remote, 5050 RGB for Bedroom, Music Sync Color Changing for Room Party 200 ft (4 Rolls of 50 ft)

I am so happy with these led lights. They were super easy to put up. I had ordered the DAYBETTER Led Strip Lights Smart with App Control Remote, 5050 RGB for Bedroom, Music Sync Color Changing for Room Party 200 ft (4 Rolls of 50 ft). These led lights came with a remote but using the DAYBETTER app is so much easier, all you have to do is scan the QR code download the app and done. On the DAYBETTER app there are a lot of color options that you can make and save. Also on the DAYBETTER app you can set a timer when you want your led lights to come on or off. The music sync works really well. These led lights are bright. When installing the led light please note they are super sticky on the back so when you when peel off the backing to apply them to your walls make sure you have them where you want them. I went by the instructions that came with the led lights and when I cleaned off the walls that I was applying the lights too there was no problem with them falling off. So far for the quality I love them and have had no issues. I normally order Govee led lights, I have been a customer with them for 6yrs but they are expensive and for the price of DAYBETTER led lights I really love them. DAYBETTER has gained a new customer!!

I bought these for my dorm because they were super cheap, but they work great. I have even bought another 200 feet for my bedroom since it stay pretty dark in there even with the lights on.Since they’re so cheap, the color will be a bit off, especially in the white, green, and yellow shades. They can’t seem to get those colors quite right. However, for the price, I’d say it’s worth the trade-off.They aren’t inherently difficult to install, but because of where I was installing them, it was a bit exhausting. But do note that if you plan to put them on the wall, you really need to put a bit of painter’s tape under them so that you won’t damage the wall when you remove them.The app is pretty easy to use, and the timer automation is great. Just note that if the power goes out or they’re unplugged, you have to reset the timer since it basically factory resets the lights.The adhesive seems to be holding up pretty well. I haven’t had any issues with these lights other than where one section occasionally dims, but that’s because of how I installed them. I ran one of the 50ft rolls under my desk and one part is right where my knee sometimes rests, and that messes with a kink in the strip that I made, and that just interrupts the power slightly. So try not to make any sharp turned with the lights, do gradual turns.

Solid 8mm LED lights that use 10mm connectors to connect to the power distribution box. The LED lights work well with the remote and the app, I'm not 100% confident that the color is fully accurate across the entire strand, as some colors seem to be off for some of the colors. For my uses, the tape stuck really well and the lights were not super delicate, so the install was smooth and quick. I do like how these tapes can be disconnected from the distribution box, the previous one I purchased they were soldered to the power box. Overall, the product is solid for the price. I dropped a star for the color accuracy and the photos that show what appears to be a 10mm tape, which is actually 8mm, which only matters if you plan to use any connectors or make and re-use cuts.If you don't care about cutting and reusing the tape, or using connectors to make tight turns, you can skip this part. I kept trying to buy a 10mm tape so I could use the 'standard' connectors to cut and splice the tapss, but that didn't happen here. In the pictures, it shows the 10mm connectors with wider tape, but the actual product is just 10mm connectors soldered onto 8mm tape. This means if you want to cut and re-use the tape, you need to buy 8mm connectors, and you won't be able to use the 8mm connectors to connect the tape to the distribution box, since it uses 10mm. None of the other reviews mentioned anything other than "you'll need connectors" so I wanted to make it clear that the 10mm set that is seemingly recommended with product is NOT the right one.

It is a nice set of leds but they do run hot so I’d recommend to only use them at 50% because 100% will absolutely mass us the color matching like them at 100% they look red when they are set to pink but at 50% it’s perfectly fine

I really like these lights overall, but disappointed that a cat foot can pull the wires out.I’ve purchased this item twice. The cord has a slight grip to it, so it’s easy to place. Unfortunately, I left a little slack in the cord and my cat got their foot (or maybe tail?) caught in it and pulled the wire out of the sheath. The wires are severed and it’s not a clip-in situation. Although I love this product, I may go with a different brand in the future.