Prime-Line R 7321 Drawer Track Guide and Glides - Replacement Furniture Parts for Dressers, Hutches and Nightstand Drawer Systems, Brown (1 Set)

Works as advertised. I highly advise to watch the video paying attention to how the little piece at the fron of the rail is installed.

The bottom two drawers on my dresser had been broken for 15 years (bought the dresser in 1996 as a bedroom set from Lacks). I didn't know what these things were called and I had looked everywhere for drawer glides. I even considered getting some other types that were considerably more expensive and much harder to mount. Boy am I glad I finally found these! They come in packs of two so you can fix two drawers with one pack if yours only has one each drawer like has. I unscrewed the center screw and replaced the part in the dresser in under 30 seconds. The two screws on the drawer took only slightly longer because I tightened the track that had gotten a bit opened up, probably because of the front being broken for 15 years! every with the extra time to squeeze and fit, squeeze and fit, squeeze and fit until I had squeezed just tightly enough I still got the part that goes into the drawer back in place in just over two minutes. I don't know if I needed to do that but I wanted to make sure the drawer glide was supported well. So for under $3 a drawer and under 3 minutes per drawer I FINALLY was able to fix my dresser drawers!!! The dresser is in great shape even if the style is a bit dated so it feels like a brand new dresser again! So happy I found these! (PS. I wrote down the model number on the back of the drawer where the square goes in permanent marker so I'll never forget and I bought an extra set just in case!)

Fits perfectly. Problem solved!

Apparently, this design was replaced by a later design with a metal plate. Regardless, we have been using these slides for a couple of decades, and have only had to replace three of them. As long as they keep making these replacements, which are extremely inexpensive compared to the latest design, we will probably keep using these. Out of the package, we only needed the rectangular piece that goes into the back of the drawer. It was a bit of a challenge to push into the slot in the drawer, but once in, the drawer slide perfectly. Our assessment of value is average. We break one of these slides about once every 4 or 5 years, which means the basic design is flawed. However, these replacements are inexpensive, and as long as they are readily available, we will use the inexpensive versions. Our overall rating is four stars, mostly because these things break periodically. Of course, that is not necessarily this supplier's problem, but it would seem that someone could come up with a sturdier, but affordable, alternative. In the meantime, these work. Enjoy!

Excellent replacement for broken drawer hardware.

This was exactly what I needed to repair my draw in my dresser. My dresser is more than 20 years old and all of a sudden the drawer broke. I found this item and it came with everything to repair the drawer. Within 15 minutes my drawer was completely repaired and back to new again

First package never arrived. The seller is no longer selling on Amazon. Money was refunded by Amazon. Ordered again and the item arrived in 2 days, it fit our existing Kenlin rite Trak 1 exactly. I like its a double pack as I have an extra. I tried to use the second trak 1 on another drawer that is really the Kenlin trak 2 guide. It is not compatible. I thought I could make it work. The Prime line R7321 workes great to replace the Kenlin Rite Trak 1. I reused the metal support from the broken glide. Popped the old broken glide out with a screwdriver and the Prime line snapped in. It is tricky to get the glide on the track, it has to be angled the right way to get past the safety feature that prevents the drawers from opening too far and falling out of the dresser. Installation of the new item on the drawer was a breeze, removed old screws and the new piece lined right up. Same with the bottom piece. After installing the pieces on the furniture, use patience getting the drawer guide onto the new slide on or you will break it again!

Well for years my bureau drawers have been falling out onto my feet!! I finally googled to see what the issue was and i ordered these and it took me 15 min to replace and fix the old broken plastic stops,,!, i wish i had done it sooner !!so easy all the screws and parts needed for two drawers . One screwdriver!! Yay why did I wait so long ?