Vitamix Drive Socket Compatible Models 5200 6300 Pro 200 300 500 750 Prep3

This socket was easy to screw into my Vitamix and works exactly like the original. I’m back to blending again!

純正品でした。英語のマニュアルでしたが、ネットに替え方は載っています。

コンテナに誤ってスプーンを入れてしまったままスイッチオン((((；ﾟДﾟ))))))) ドライブソケットが割れました。 慌ててこちらでソケットを購入。元通り動きました、ホッ。 ほんとーーーに助かりました。 以後気をつけたいと思います。

並行輸入品だと修理に困るので、ちょっとした部品で直る場合は非常に助かる。長年使ってるとこの部分の故障が多いようです。

人から頼まれて代理購入。 交換まで請け負って作業を済ませたが、まあ普通。 交換もレンチ等入っていたので誰でも出来ると思うが、本体内部にネジなど落とし込まないように注意を。 並行輸入品との事で、いわゆる国内代理店販売の「純正品」と同等品質とは思うが、純正品と違って不良やクレーム等の相談窓口はなし。その分価格は安いので…。 なおこの製品そのものは問題なく使えていたそうだが、本体のモーターが先に故障して現在お蔵入りとか…。 本体も並行輸入品だったために相談窓口がなく、部品取りに保管するほかなかったようだ。

なかなか販売していない純正部品です。貴重な製品です。

純正パーツが届きます！ 4年使用のVitamixの歯車がうまく噛み合わず、空回りするようになったのでいろいろ調べてこちらを購入。 取り付け少し難しかったですが、10分くらいで交換できました。 空回り一切なくなり、新品の時のようなパワーです！

I found this easy to install and it appears to be a perfect match to the one my old Vitamix had that simply wore out due to years of use.. I was hesitant at first, as I had guessed that it would be a challenge to replace, but actually it was extremely easy to do. I made a video to show the steps to anyone else feeling trepidatious. The handy bent-nosed tweezers I used in the video to easily work with the set-screw plug were these https://amzn.to/3JDTDPb in case that's helpful to anyone wanting to do the same. The Kit I received included: + the replacement socket itself + a 5/64" Hex Wrench + a set-screw plug to replace the one you will remove + printed instructions that included steps and images (well-written) The Summary of Steps are: 1) Unplug the unit from the electric outlet 2) Remove the centering pad by lifting up each corner and gently pulling upward 3) Locate the set screw location. (Depending on your vitamix model, you may need to rotate the vitamix. My set screw was on the back of the vitamix.) 4) There is a silicone seal over the set screw. Remove this silicone seal, or puncture through the silicon in order to access the set screw. 5) The drive socket has an arrow printed on it. Rotate the arrow until it lines up with the set screw. 6) Use the hex wrench to loosen the set-screw by turning it counter-clockwise. 7) Pull up to remove the drive socket. 8) Push the new drive socket straight down onto the motor shaft. 9) Use the hex wrench to tighten the set-screw by turning it clockwise. ** Do not overtighten.** 10) Back it off one-quarter turn and make sure there is a small amount of play up and down with the drive socket. 11) Place the set screw cover, or alternatively, some silicone sealant over the set-screw area to prevent any liquids from getting into the motor housing. 12) Replace the center pad, with the Vitamix logo facing the front side of the blender. That's it! You've done it! Plug the Vitamix back in to an electric outlet and enjoy! I uploaded a video to demonstrate all this for those who prefer visual information. Overall, I am delighted at the abundance of replacement parts available for Vitamix here on Amazon. This makes it easy to maintain existing models and recycling/reusing/extending product life rather than creating landfill waste. Big plus!

This is old one delivery not one time 2 time

Excelente, funcionó perfecto

It took me a couple days to confirm but this part does work as a replacement for Vitamix Explorian E310. Part is plastic and metal, well built. Comes with proper instructions on how to remove and replace. The included Alan key is helpful, just get some food safe silicone to seal off the hole to make sure your drive unit stays dry.

Great quality, fits perfect and works as if it was original part.