Ender 3 V3 Plus 3D Printer, CoreXZ 600mm/s High-Speed Auto Leveling Direct Drive Extruder Stable Metal Build Tri-Metal Nozzle Ender 3D Printer Large Print Size 11.8x11.8x13.0in

This is my very first 3D printer. I have no experience whatsoever with 3D printing. This is perfect for beginner's. It has been working perfectly straight out of the box. Set up was really really easy. I definitely recommend this for any beginner. The only calibration I have done on this machine has been the initial setup calibrations and it's been perfect ever since. I will be doing the other calibrations as well as adjusting the speeds. This is a fast printer so i should set it up to do what its built for. Looking forward to playing with the settings! It has auto leveling and i would say durability is fine (had one issue where it sounded like it collided with a train. Turns out the roll of filament was wound really bad from the maker, it literally would not let the extruder move. Keep an eye on them rolls!) It is kinda loud at times but...i live in a studio apartment so...yea. I have been using OrcaSlicer and have not payed any attention to the Creality cloud or whatever it is they offer with the printer. I can access it through the network, start prints and upload directly from the PC/Laptop instead of just the USB method. I love this thing! Its been printing constantly and i already have burned through SO MUCH filaments. Worth every penny! Definitely recommended for everybody and their grandma.

This was my first printer it's been super reliable. I mainly use it for minis and terrain for a ttrp campaign that I'm running. The prints look good, it's fast enough for what I use it for, and haven't had a lot fails. Really the only time it fails is when I try to print smaller minis with finer connection points (like wings). It was easy to set up and get printing, I think it took me less than a half an hour to get going. The slicer, for me, is easy to use. Definitely recommend picking this up if your new to the hobby, or if you're looking for a printer that just works.

Started out fine. After using for about 6 months, it seems to have a cold spot on the print bed which causes thinner objects to peal off the bed while printing. This can be compensated for by heating bed up a little more and using some hair spray. What's worse is that for some reason or another my x axis motor got a frayed cable very close to motor side connector (no idea how this could have happened except that was pinched from the start and eventually failed). This means I should replace the entire print head and x axis cable harness. Except, the connectors on the main board are HOT GLUED INTO PLACE ON THE BOARD. Why would anyone do such a thing? I would only want to try cutting out the glue in order to get the existing cable out as a last resort to avoid damaging the board directly. So I'll have to get a similar 4 pin connector and splice it in with some heat shrink... As this is my first 3d printer, I can only advise anyone in a similar boat to NOT BUY this printer. This is a pretty basic bottom-level printer. Go for something a step up in functionality even if it's you're first printer. There's a lot of good options now days under $500.

I have been amazingly impressed with this printer. It was very easy to put together. From unboxing to running the test print was roughly 45 minutes. It pairs well with the creality app for printing models. Being able to re-run prints using my phone has been great. This arrived quickly and was packaged very well in the box. If I ever have the need for a 2nd printer I would not hesitate to buy this. The features of this printer takes alot of the guess work out. The display screen is easy to use. It does not take up alot of space.

Really great printer. C reality has great set up instructions too. If you are brand new to 3D printing, plan to spend some time learning the process of getting plans and getting them into a format you can use. It not hard, but does have a learning curve.

I have a se and a ke, the ke is the better buy - bed leveling is more accurate, klipper programming is a nice addition, 300°c nozzle is basically a must have if your going to print anything besides pla, filament sensor is a nice to have. The se and ke build plates look the same but at least on mine the ke has far better adhesion and is way more durable (se build plate got 2 deep scratches(down to the spring steel) within the first week) Fast, good print and easy assembly from slicing open the box to your first print in 20-30 minutes (10-15 for assembly, 10-15 for auto calibration+setup) Reason for 4 stars is on mine the hotend fan has bad bearings right out of the box P.s. I've upgraded mine with the creality light+ printed accessories and plan to add the nebula camera and acceleration snesor (As well as print the fatburner/lightburner toolhead assembly for better part cooling and noise) So far I've printed pla+ and petg with good results, going to try tpu next week and cf-pa6 soon (cf-pa6 I need a dryer and enclosure) this thing is FAST compared to a standard ender3 or even the se model - great value So far I've printed all kinds of organizational stuff, kids toys, a bit of 2A, decorations(big elephant model for my mom) etc... dont know why i waited so long to get into 3d printing- very functional for everyday stuff

It’s a great easy to use printer that prints fast and produces good quality prints

Comprei a impressora já a algum tempo e está funcionando perfeitamente, a loja tem um ótimo acompanhamento do produto e durante o processo de entrega recebi vários email da empresa sempre me mantendo informado das condições. É uma impressora incrível, depois da mesa nivelada, ela faz tudo praticamente sozinha, sem que seja nescessário procedimentos mais complexos de manutenção. Em resumo: ótimo produto, ótimo vendedor e estou super satisfeito com a compra.

Embalagem totalmente lacrada, tudo bem embalado. Primeira experiência com impressora 3D e não tive dificuldade para montar e nem para começar a imprimir. Já vem com todas as ferramentas necessárias para montagem. Pelo menos nesse modelo um dos grandes segredos são os ajustes iniciais, como o nivelamento. Documentação que vem no cartão de memória, bem mais detalhada do que a impressão. Ambas as versões possuem o manual em português do Brasil.

Após alguns dias de uso o cabo da mesa de aquecimento rompeu-se. Mas o vendedor (denominado Sovol) prestou assistência e deu tudo certo. Excelente impressora, além de bonita e robusta. O ideal é, nas primeiras impressões já imprimir protetores para os cabos da mesa (chain). Tem STL no Thingverse. Indico a compra.

10

Impressora muito fácil de ser montada e com excelentes resultados de impressão. Apenas necessita ser corretamente calibrada e ajustado. O vendedor (Sovol) presta um EXCELENTE atendimento pos venda, arrisco dizer que até melhor que o próprio fabricante!